Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 469 for “"Deposition Rate"”.
-
Radio Frequency Sputtering: Effects of Geometry on Deposition Rate of Copper
No abstract prepared.
-
Synchronized material deposition rate control with path velocity on fused deposition machines
… deposited by the extruders. When the material deposition is not synchronized with the tangential velocity of the machine, an excess material is accumulated at sharp curvatures where the machine slows down. This thesis presents a novel algorithm for the synchronized deposition of thermo-plastic …
-
Linear magnetron high deposition rate magnet pack for high power impulse magnetron sputtering
… proven to be a promising ionized physical vapor deposition (PVD) technique, with industrial implementation hindered by low deposition rates. HiPIMS applies high voltages and high currents at low duty cycles to the sputtering target in order to achieve very high power densities, causing electron …
-
Study and modelling the 3-D printing of amorphous materials using high deposition rate
… while simultaneously enabling high-speed deposition without quality degradation. The absence of discrete melting points and the time-temperature-dependent properties of amorphous materials create rheological complexities that conventional process models fail to capture, particularly near …
-
Characterization of high deposition rate wire arc directed energy deposition of 316L stainless steel for pressure boundary components
Wire-arc directed energy deposition (WA-DED) or wire-arc additive manufacturing (WAAM) presents a novel fabrication method for construction of pressure retaining components within nuclear power plants; reducing lead times for construction of replacement parts and potentially preventing millions of …
-
Physical, mechanical and rheological behaviour of prepreg tapes for part quality and deposition rate improvement in composites automated manufacture
… (which is anisotropic as well as temperature and rate-dependent) and the dynamic interactions between the different constituents (the prepreg tape, the machine roller and the substrate on which the material is deposited) involved in the process make any attempt at predicting of AFP steering defect …
-
Development of a methodology for the estimation of sediment deposition rate in dam reservoirs: application to dams in Western Greece
In this doctoral thesis, an integrated methodology was developed for the estimation of soil erosion, sediment delivery, and sediment deposition rate in dam reservoirs, with application to the Pinios Dam drainage basin and reservoir in Western Greece. The study links catchment-scale erosion …
-
Flow Assurance and Safety of Pipelines in Cold Conditions
… flow assurance issues that are caused by hydrates, wax, or even ice. To evaluate the effect of these solids on pipeline safety, this dissertation studied pipeline safety from three aspects, a mechanistic model to predict wax and ice deposition rate, a thermodynamic model to predict hydrate …
-
Process Planning for Concurrent Multi-nozzle 3D Printing
… for this slow adoption is the low material deposition rate during printing. Increasing the material deposition rate by increasing the layer thickness or utilizing larger diameter nozzles results in deterioration of the surface quality of the part. This is known as the “staircase effect”; …
-
Dependence of stress and resistivity of sputtered copper films on deposition conditions
… films on glass and polyimide (Kapton H) substrates were studied as functions of deposition rate and argon working gas pressure. For deposition rates from 1 A/sec to 5 A/sec, three regions were studied at different argon gas pressures : (1) a compressive region at 2 mTorr, (2) a tensile region …
-
Controlled deposition of structured polymer films: chemical and rheological factors in chitosan film formation
… thin films of chitosan polymer. The effect of deposition rate on film thickness was characterized for solutions of deacetylated and butyl-modified chitosan. For the range of deposition rates analyzed, the relationship between film thickness and increasing deposition rate fell into three …
-
Deposition of suspensions in laminar flow in the entrance region of channels with diffusive, electrostatic and gravitational effects
… investigation entailed the consideration of the deposition of suspensions in laminar flow in the entrance region of a parallel-plate channel, and both converging and diverging channels, under the combined influences of diffusive, electrostatic and gravitational effects. The fluid phase was …
-
Dependence of stress and morphology of sputtered copper films on deposition conditions
… developing semiconductor industry, sputter deposition is the most widely used metallization (metal coating) process in chip manufacturing and packaging. Since most sputtered coatings are in a state of stress, understanding the origin of stress is very important. High stress can lead to …
-
An investigation into the effects of complex topography on particle dry deposition
… to predict the spatial variation of particle dry deposition following a nuclear accident. The interaction of landscape features, atmospheric flow and particle dry deposition has been investigated with this in mind. Wind tunnel studies have been used with computational fluid dynamics to predict the …
-
Lagrangian Based Analysis of Particle Concentration Decay in Chamber and Room Environments
… that the particles are well-mixed spatially, and deposition of particles on walls and surfaces is modeled via a first order kinetic approach wherein the deposition rate is equal to the product of the aerosol concentration and a deposition rate (loss) coefficient. The loss coefficient is frequently …
-
Effects of electrostatic force and hygroscopic growth on particle deposition in the respiratory system
… disease (COPD). Better understanding of the deposition mechanisms of drug particles in the respiratory system can improve the efficiency of drug particles in DPIs. This study focused on the impact of electrostatic force and hygroscopic growth (HG) on particle deposition in the upper airways …
-
VHF-PECVD and analysis of thin nano-crystalline silicon films with a multi-tile plasma source for solar energy applications
… power coupling. Specifically, this thesis concentrates on the PECVD of nano-crystalline silicon for applications in thin film solar manufacturing. We examine films produced by the MAMELUKE source focusing on the capability to produce uniform, high quality films over large areas with high …
-
Additive-Assisted Nucleation and Growth of Thin Films: Controlled Experiments and Multiscale Simulations
… growth and wild nucleation during copper electrodeposition. Additive compositions that served to suppress the deposition rate (high chloride (10 ppm) and high PEG (3000 ppm)) slowed the deposition rate on the Cu seeds and increased the level of wild nucleation on the Au substrate. Decreased …
Page 1 of 24