Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 231 for “"Deposition Temperature"”.

  1. Deposition temperature of evaporated permalloy films

    … is developed and used to measure the deposition temperature of evaporated permalloy films. The maximum permalloy film temperature is 12000 higher than the glass substrate temperature during deposition for low evaporation rate, 15 Å/sec, due to radiation energy from the tungsten boat …

    rice Repository record for Deposition temperature of evaporated permalloy films (opens in a new tab)

  2. Measurement and control of deposition temperature of Gd-Co rf sputtered films

    … (TPTC) is developed and used to measure the deposition temperature of rf sputtered amorphous gadolinium-cobalt films. Deposition temperature can be varied with the type and the amount of thermal backing which affixes the substrates to the substrate holder. By controlling the temperature of …

    rice Repository record for Measurement and control of deposition temperature of Gd-Co rf sputtered films (opens in a new tab)

  3. Stoichiometry and Deposition Temperature Dependence of the Microstructural and Electrical Properties of Barium Strontium Titanate Thin Films

    … using liquid source metal organic chemical vapor deposition. A stoichiometry series was deposited with various GrII/Ti ratios (0.658 to 1.022) and a temperature series was deposited at 550 to 700°C. The thin films were characterized using transmission electron microscopy. Both series of samples …

    unt Repository record for Stoichiometry and Deposition Temperature Dependence of the Microstructural and Electrical Properties of Barium Strontium Titanate Thin Films (opens in a new tab)

  4. Role of deposition temperature and concentration on the self-assembly and reaction of organic molecules at the solution-graphite interface

    Das Hauptthema dieser Dissertation ist die Untersuchung der Selbstorganisation organischer Moleküle an der Flüssig-Fest-Grenzfläche (LSI). Besondere Betonung liegt auf der Kontrolle der Selbstassemblierung durch geeignete Parameter: die Substrattemperatur während der Abscheidung, die Konzentration …

    qucosa-diss

  5. Effects Of Deposition Temperature And Post Deposition Annealing On The Electrical Properties Of Barium Strontium Titanate Thin Film For Embedded Capacitor Applications

    … substrate. This thesis focuses on the effect of deposition temperature and post deposition annealing (PDA) in different gas ambient on the electrical properties of sputter deposited ferroelectric Barium Strontium Titanate (Ba0.5St0.5) TiO3 thin film capacitors. Approximately 2000A of Barium …

    ucf Repository record for Effects Of Deposition Temperature And Post Deposition Annealing On The Electrical Properties Of Barium Strontium Titanate Thin Film For Embedded Capacitor Applications (opens in a new tab)

  6. Nanocomposite coatings based on quaternary metal-nitrogen and nanocarbon systems

    … or as a basis for nanocrystalline diamond deposition. The work is divided into three stages. The initial study determined the viability of the CrN-WC system, and its use as an interlayer for nanocrystalline diamond. This successful study was followed by a variation of deposition conditions …

    uab Repository record for Nanocomposite coatings based on quaternary metal-nitrogen and nanocarbon systems (opens in a new tab)

  7. Low pressure chemical vapor deposition of silicon dioxide and phosphosilicate glass thin films

    … glass. The films were processed at different temperatures between 700 C and 850 C at a constant pressure, and at different flow ratios of the precursors. The films deposited were uniform, amorphous and the composition of the films varied with deposition temperature and precursor flow ratios. …

    njit Repository record for Low pressure chemical vapor deposition of silicon dioxide and phosphosilicate glass thin films (opens in a new tab)

  8. Synthesis and characterization of silicon dioxide thin films by low pressure chemical vapor deposition

    … dioxide films by low pressure chemical vapor deposition. These films were synthesized in the temperature range of 600 C to 800 C at constant pressure, and at different gas flow composition. The films were found to be uniform with a composition that varied with deposition temperature and gas …

    njit Repository record for Synthesis and characterization of silicon dioxide thin films by low pressure chemical vapor deposition (opens in a new tab)

  9. Synthesis and characterization of phosphosilicate glass films by LPCVD for sensor application

    … The films were processed at different temperatures between 600 C and 700 C at a constant pressure, and at different flow rate of TMP. The effect of TMP flow rate and deposition temperature on deposition parameters and the properties of PSG films were investigated. The films deposited …

    njit Repository record for Synthesis and characterization of phosphosilicate glass films by LPCVD for sensor application (opens in a new tab)

  10. Synthesis and characterization of low pressure chemically vapor deposited boron nitride and titanium nitride films

    … films synthesized by low pressure chemical vapor deposition (LPCVD) using ammonia (NH_3)/triethylamine-borane and NH_3/titanium tetrachloride as reactants, respectively.Several analytical methods such as the FTIR, UVNisible spectroscopy, XPS, AES, RBS, SEM, and XRD were used to study the …

    njit Repository record for Synthesis and characterization of low pressure chemically vapor deposited boron nitride and titanium nitride films (opens in a new tab)

  11. Interface morphology and Dzyaloshinskii-Moriya interaction in Pt/Co thin films

    … 50 A). In Pt/Co/Pt, altering the substrate temperature during deposition of the top Co/Pt bilayer in the range of 100 C to 300 C formed a peak in total interfacial disorder with deposition temperature of 3.3 A at around 250 C. The coercivity increased from 230 +/- 60 Oe to 400 +/- 60 Oe …

    whiterose Download PDF for Interface morphology and Dzyaloshinskii-Moriya interaction in Pt/Co thin films (opens in a new tab)

  12. Synthesis and characterization of silicon nitride film deposited by plasma enhanced chemical vapor deposition from ditertiary-butyl silane

    … nitride films by plasma enhanced chemical vapor deposition (PECVD) with ammonia. The films were deposited in the temperature range of 150 to 300 °C with 0.15 watts/cm<sup>2</sup> plasma power density at 100 KHz. The NH<sub>3</sub>/DTBS ratio was varied from 1 to 18, the total flow rate was …

    njit Repository record for Synthesis and characterization of silicon nitride film deposited by plasma enhanced chemical vapor deposition from ditertiary-butyl silane (opens in a new tab)

  13. Evolution of the surface morphology of homoepitaxial germanium(001) and heteropitaxial silicon(0.5) germanium(0.5)/germanium(001) deposited by molecular beam epitaxy at reduced temperatures

    … roughens as a function of film thickness, deposition temperature, and substrate miscut. The results allow us to write empirical expressions for feature spacing and roughness amplitude of the growing surface over a wide range of film thicknesses and deposition temperatures. We show that …

    uiuc Repository record for Evolution of the surface morphology of homoepitaxial germanium(001) and heteropitaxial silicon(0.5) germanium(0.5)/germanium(001) deposited by molecular beam epitaxy at reduced temperatures (opens in a new tab)

  14. Reactive Sputter Deposition of Lithium Phosphorus Oxynitride Thin Films, A Li Battery Solid State Electrolyte

    … be prepared by many techniques, but RF sputter deposition is most frequently used and was investigated in this dissertation, in spite of its low deposition rate, because of it offers more reliable and controllable processing. This dissertation includes the methodologies of sputter deposition and …

    ucf Repository record for Reactive Sputter Deposition of Lithium Phosphorus Oxynitride Thin Films, A Li Battery Solid State Electrolyte (opens in a new tab)

  15. Synthesis and characterization of LPCVD SiC films using novel precursors

    A unique low pressure chemical vapor deposition (LPCVD) process has been developed to synthesize amorphous and crystalline SiC films using environmentally benign chemicals. The interrelationships governing the process variables, compositions and select properties of the resulting films were …

    njit Repository record for Synthesis and characterization of LPCVD SiC films using novel precursors (opens in a new tab)

  16. Study Of Cu Free Back Contacts To Thin Film CdTe Solar Cells

    … CdTe surface. The effect of Cu2Te thickness and deposition temperature on contact and cell performance will be studied with the ZnTe depositions conditions kept constant. C-V measurements to study the effect of contact deposition conditions on CdTe doping will also be performed. These contacts …

    usf Repository record for Study Of Cu Free Back Contacts To Thin Film CdTe Solar Cells (opens in a new tab)

  17. Environmental and thermomechanical stability of thin films for optical applications.

    … and to avoid long period exposure to high temperature. In the research on ZrO₂ evaporated films, with and without ion-assisted deposition (IAD), we performed interferometry in a vacuum oven to study total stress of films as a function of temperature. On thermal cycling, all the plots of …

    arizona-thes Repository record for Environmental and thermomechanical stability of thin films for optical applications. (opens in a new tab)

  18. Synthesis and characterization of LPCVD silicon carbide thin films for x-ray lithography

    … were fabricated using low pressure chemical deposition method with a single liquid precursor, di tertiary butyl silane. The films were deposited for a temperature range of 500-850°C and at different pressures ranging from 0.05 to 1 torr. The growth rate of the films deposited at constant …

    njit Repository record for Synthesis and characterization of LPCVD silicon carbide thin films for x-ray lithography (opens in a new tab)

  19. Electrochemical vapor deposition of yttria stabilized zirconia on porous graphite substrates

    … graphite substrate by electrochemical vapor deposition using CO as the oxidizing agent. Five experimental variables, deposition temperature, deposition time, gas flow rate, anode H$\sb2$/Ar ratio, and substrate porosity were varied to investigate their effect on EVD process.

    uiuc Repository record for Electrochemical vapor deposition of yttria stabilized zirconia on porous graphite substrates (opens in a new tab)

Page 1 of 12