Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 82 for “"Developing Flow"”.
-
Laminar developing flow in tubes
Electronic Thesis or Dissertation
-
Combined Radiation and Convection in Developing Flow in a Parallel Plate Channel with Real Gas Behavior
The laminar, thermally developing flow of gases in a two-dimensional parallel plate channel is studied here. Using computational fluid dynamics (CFD), the combined effects of convection and real gas radiation are explored. Gas mixtures composed of H2O, CO2, and N2 are considered. To account for …
-
Heat Transfer in Smooth and Ribbed Rectangular Two-Pass Channels with a Developing Flow Entrance at High Rotation Numbers
Cooling channels with a developing flow entrance condition and aspect ratios of 1:4 and 2:1 were studied. The range of the rotation number and buoyancy parameter for the selected AR channels was extended. The maximum Ro and Bo for the 1:4 channel was 0.67 and 1.9, respectively. For the 2:1 channel, …
-
Heat Transfer Correlations for Laminar, Developing Flow with Boundary Heat Flux and Heat Generation in Both the Fluid and Solid Domain
… fluid dynamics simulations for laminar, developing flow with internal heat generation and an imposed wall heat flux. The study focuses on circular ducts and parallel plates, considering various axial distributions for internal heat generation and boundary heat fluxes as well as square …
-
Heat Transfer Correlations for Laminar, Developing Flow with Boundary Heat Flux and Heat Generation in Both the Fluid and Solid Domain
… fluid dynamics simulations for laminar, developing flow with internal heat generation and an imposed wall heat flux. The study focuses on circular ducts and parallel plates, considering various axial distributions for internal heat generation and boundary heat fluxes as well as square …
-
Heat Transfer Correlations for Laminar, Developing Flow with Boundary Heat Flux and Heat Generation in Both the Fluid and Solid Domain
… fluid dynamics simulations for laminar, developing flow with internal heat generation and an imposed wall heat flux. The study focuses on circular ducts and parallel plates, considering various axial distributions for internal heat generation and boundary heat fluxes as well as square …
-
Heat Transfer Correlations for Laminar, Developing Flow with Boundary Heat Flux and Heat Generation in Both the Fluid and Solid Domain
… fluid dynamics simulations for laminar, developing flow with internal heat generation and an imposed wall heat flux. The study focuses on circular ducts and parallel plates, considering various axial distributions for internal heat generation and boundary heat fluxes as well as square …
-
Linear stability of non-parallel flow in the entrance region of ducts
… is made of the linear stability of the developing flow of an incompressible fluid in the entrance region of annular ducts, circular tubes, and parallel-plate channels. Small axisymmetric disturbances for annular duct and tube flows and small two-dimensional disturbances for channel flow …
-
The Development of Turbulent Flow in the Inlet Region of Smooth Pipe
Turbulent flows are encountered in nearly every case where fluid motion is involved. Turbulent flow in pipes is of great practical interest, and the problem of flow in the entry region is of special importance since the great majority of applications are in the realm of developing flow.
-
Large Eddy Simulations of Flow and Heat Transfer in the Developing and 180° Bend Regions of Ribbed Gas Turbine Blade Internal Cooling Ducts with Rotation - Effect of Coriolis and Centrifugal Buoyancy Forces
… them, and the ability to accurately predict the flow and heat transfer within these channels leads to higher design reliability and prevention of blade failure resulting from local thermal loading. Prediction of the flow through these channels is challenging, however, because the flow is highly …
-
Pressure drop and velocity distribution in the laminar entrance region of a triangular duct.
The developing flow in the hydrodynamic entrance region of an equilateral triangular channel was investigated. Using a fully developed velocity profile from Knudsen and Katz (3) as a boundary condition 8 the equations were solved numerically employing the method of Chorin (l) e. The resulting …
-
Empirical Investigation Of The Laminar Thermal Entrance Region And Turbulent Flow Heat Transfer For Non-Newtonian Silica Nanofluid In Hexagonal Tubes
This research seeks to determine for the flow of stable dispersion of 9.58% silicon-oxide (SiO2) nanoparticles by volume in water through three hexagonal tubes of hydraulic diameters 1.67 mm, 2.42 mm and 3.26 mm, the pressure drops across the length of the tubes with and without the application of …
-
Numerical Simulations in Electro-osmotic Flow
The developing flow field in a parallel plate microchannel, induced by wall motion, has been modeled numerically. This type of flow simulates the physical driving mechanism that exists in electro-osmotically generated flow with large channel diameter-to-Debye length ratios (Z). The physics of the …
-
Experimental investigations on thermal and hydrodynamic entrance regionis in microchannels using oPIV and TLC techniques
… Essential for advanced design applications are flow and heat transfer analyses of microchannels, which are used to transport fluid within micro-systems and their integrated components. The entrance region of a channel, where the flow is hydrodynamically, thermally, or simultaneously developing, …
-
Experimental development of tubseide heat transfer correlations for laminar flow with and without inserts.
An experimental study of laminar flow heat transfer of an ethylene glycol/water mixture in an electrically heated horizontal tube using wire mesh (HEATEX) and twisted tape inserts was investigated. Twelve thermocouples, inserted in the tube wall at four longitudinal locations, enabled a mean inside …
-
Investigation of Fouling in Wavy-Fin Exhaust Gas Recirculators
… temperature gradient. Subsequently, periodic and developing flow simulations are performed on a wavy channel geometry, a common EGR design for various Reynolds numbers and thermal boundary conditions. Constant heat flux boundary condition is used in the periodic fully-developed calculations, which …
-
Design, Construction, and Qualification of an Open Loop Wind Tunnel Facility to Quantify Enhanced Heat Transfer/Pumping Power Performance in Isothermal Rectangular-Cross Section Passages
… of heat transfer passages triggers unsteady flows that, under certain circumstances, increase passage heat transfer for a given fan power compared to flat-walled channels. The overall objective of this research program is to determine if grooved passages can be used to reduce the size and/or …
-
A Computational Fluid Dynamics (CFD) Analysis of Developing Turbulent Flow in Straight Ducts
… fluid dynamics (CFD) analysis was performed on developing turbulent flow of air in straight ducts. A uniform inlet velocity was assumed for two different scenarios, namely at the straight duct inlet and at the inlet of a right-angle elbow located immediately upstream of the straight duct. Using …
-
Flow regimes and pressure histories during blowdown from a vertical tube
… to compare the effect of body force on transient flow patterns and pressure histories. Tests were done using Freon-114 in a clear polycarbonate pipe 4 m long with a 32 mm I.D. Results, presented in the form of flow regime maps, show that the basic nature of the developing flow in a vertical pipe …
Page 1 of 5