Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 45 for “"Device sensitivity"”.

  1. Tailoring the Spectral Transmission of Optofluidic Waveguides

    … additional off-chip components and increasing device sensitivity. Additional techniques to increase device sensitivity and utility, such as hybrid ARROW platforms and optical manipulation of samples, are also explored.

    byu Repository record for Tailoring the Spectral Transmission of Optofluidic Waveguides (opens in a new tab) Download PDF for Tailoring the Spectral Transmission of Optofluidic Waveguides (opens in a new tab)

  2. Deposited Nanorod Films for Biosensor Applications

    … used as the basis of many biological sensing devices. Here, we successfully demonstrate that the combination of the photonic crystal structures and a dielectric nanorod coating prepared by glancing-angle deposition method can lead to significant increases in the device sensitivity.

    uiuc Repository record for Deposited Nanorod Films for Biosensor Applications (opens in a new tab)

  3. Resonant Cavity Enhanced Photodetectors and Optoelectronic Switches

    … of novel structures consisting of optoelectronic devices integrated into Fabry-Perot resonant cavities. The photosensitivity of conventional detectors is governed by the optical properties of the semiconductor material requiring thick absorption regions for high quantum efficiencies. It is …

    uiuc Repository record for Resonant Cavity Enhanced Photodetectors and Optoelectronic Switches (opens in a new tab)

  4. An integrated optical microcalorimeter

    … technique is known for its high degree of sensitivity. Bulk optical interferometry is impractical for microcalorimetric measurements. Interferometric fiber calorimeters suffer from a wide range of environmentally induced perturbations that cannot be distinguished from measurand signals. The …

    washington Repository record for An integrated optical microcalorimeter (opens in a new tab)

  5. Development of Three Dimensional Fluid-Structure Interaction Models for the Design of Surface Acoustic Wave Devices: Application to Biosensing and Microfluidic Actuation

    Surface acoustic wave (SAW) devices find uses in a plethora of applications including but not limited to chemical, biological sensing, and microfluidic actuation. The primary aim of this dissertation is to develop a SAW biosensor, capable of simultaneous detection of target biomarkers in fluid …

    usf Repository record for Development of Three Dimensional Fluid-Structure Interaction Models for the Design of Surface Acoustic Wave Devices: Application to Biosensing and Microfluidic Actuation (opens in a new tab)

  6. Porous Silicon Photonics at Unity Confinement Factors for Surface Adlayer Biosensing

    … for label free optical biosensing. However, device sensitivity toward surface-attached biomolecules is directly restricted because of only evanescent interaction and low modal overlap with the active sensing region. In this work, we demonstrate a mesoporous silicon waveguide design created …

    clemson Repository record for Porous Silicon Photonics at Unity Confinement Factors for Surface Adlayer Biosensing (opens in a new tab)

  7. Development of High-Throughput Microfluidic Impedance Spectroscopy Platform for Analyzing Microdroplets in Droplet Microfluidic System

    … has not been reported in the literature yet. The device sensitivity was demonstrated using chlamydomonas reinhardtii cells. Two throughputs (17 and 140 droplets/s) for four level of cells concentrations were discriminating and compared. The maximum deviation in the acquired data for both cases was …

    tamu Repository record for Development of High-Throughput Microfluidic Impedance Spectroscopy Platform for Analyzing Microdroplets in Droplet Microfluidic System (opens in a new tab)

  8. Group III-nitride devices and applications

    … focuses on developing group III-nitride based devices for novel applications.;GaN is a robust, chemically inert, piezoelectric material, making it an ideal candidate for surface acoustic wave (SAW) devices designed for high temperature and/or harsh environment sensors. In this work, SAW devices …

    wvu Repository record for Group III-nitride devices and applications (opens in a new tab)

  9. Integrating nanostructured artificial receptors with whispering gallery mode optical microresonators via inorganic molecular imprinting techniques

    … monitoring. This is achieved by pairing a high-sensitivity signal transducer with a biorecognition element that imparts selectivity towards the compound of interest. However, many environmental pollutants do not have corresponding biorecognition elements. Fortunately, biomimetic chemistries, …

    missouri Repository record for Integrating nanostructured artificial receptors with whispering gallery mode optical microresonators via inorganic molecular imprinting techniques (opens in a new tab)

  10. A probabilistic method for comprehensive voltage sag management in power distribution systems

    … the optimal type and rating of a mitigation device can be assessed. Remaining voltage and sag duration are the variables considered in the arrays. Array resolution and thus the procedure accuracy are freely selectable. Increasing the number of dimensions allows for additional sag features, …

    aalto Repository record for A probabilistic method for comprehensive voltage sag management in power distribution systems (opens in a new tab)

  11. Plasmonic Superconducting Single Photon Detector

    … be carefully determined in order to maintain the device sensitivity while crossing over from the current crowding to vortex-based detection mechanisms.

    waterloo Repository record for Plasmonic Superconducting Single Photon Detector (opens in a new tab)

  12. The development of fibre-optic acoustic emission sensors for structural health monitoring

    … prolonging operational lifetime and enhancing device sensitivity. In addition, piezo-electric AE sensors are affected by electromagnetic interference meaning that when required in challenging conditions such as in flammable or explosive environments, AE sensors need to be manufactured as …

    birmingham Download PDF for The development of fibre-optic acoustic emission sensors for structural health monitoring (opens in a new tab)

  13. Studies of magnetoresistance and hall sensors in semiconductors

    … Mesa Hall Sensor (VMHS) are studied.</p> <p>EMR devices have been fabricated from a 2DEG InAs/GaSb structures which exhibit a low carrier density and high mobility that achieve the best performance. The general electrical magneto-transport properties are given. The experiments investigate mainly …

    oxford Repository record for Studies of magnetoresistance and hall sensors in semiconductors (opens in a new tab)

  14. Diffraction-based integrated optical readout for micromachined optomechanical sensors

    … transparent substrate to achieve interferometric sensitivity in a small volume. The device sensitivity is actively optimized via the built-in electrostatic actuation capability, which may be utilized for self calibration and force feedback operation. Optical interconnect through the backside of …

    gatech Repository record for Diffraction-based integrated optical readout for micromachined optomechanical sensors (opens in a new tab)

  15. Performance characterization of the defect-enabled all-silicon avalanche photodiode at telecommunication wavelengths

    … optical signals at 1550 nm. The fabricated devices achieved multiplication gains up to M=35, with gain-bandwidth products reaching 230 GHz, and responsivity as high as 13 A/W. Chapter 4 explores the noise characteristics of these devices and provides a detailed analysis of noise behavior …

    mcmaster Repository record for Performance characterization of the defect-enabled all-silicon avalanche photodiode at telecommunication wavelengths (opens in a new tab)

  16. A Polymer-Based Microfluidic Device with Electrolyte-Enabled Distributed Transducers (EEDT) for Distributed Load Detection

    … study of a polymer-based microfluidic device with electrolyte-enabled distributed transducers and demonstrates a new concept on using a single microfluidic device for distributed-load detection, which takes advantage of the low-cost microfluidic fabrication technology and the low …

    odu Repository record for A Polymer-Based Microfluidic Device with Electrolyte-Enabled Distributed Transducers (EEDT) for Distributed Load Detection (opens in a new tab)

  17. Improved fabrication and modeling of piezoresistive microcantilever beams for gas detection and sensing.

    … of the gas changes the beam resonance behavior. Device sensitivity has been increased dramatically after changing the symmetric beam base to an asymmetric beam base. This dissertation seeks to improve on beam fabrication and simplify the fabrication procedure compared to earlier approaches. By …

    louisville Repository record for Improved fabrication and modeling of piezoresistive microcantilever beams for gas detection and sensing. (opens in a new tab)

  18. An Investigation of the Utilization of Smart Meter Data to Adapt Overcurrent Protection for Radial Distribution Systems with a High Penetration of Distributed Generation

    … of their protection, namely, selectivity and sensitivity, were easily achieved. Settings for overcurrent protective devices (OCPDs) were static and based on the maximum load downstream of its location, with little concern of major configuration changes. However, the integration of distribution …

    tamu Repository record for An Investigation of the Utilization of Smart Meter Data to Adapt Overcurrent Protection for Radial Distribution Systems with a High Penetration of Distributed Generation (opens in a new tab)

  19. Cyclodextrin-Derived Polymer Networks for Applications in Selective Molecular Adsorption

    … their feasible incorporation into functional devices. The fourth chapter describes the vapor adsorption applications of CD-PNPs towards benzene, toluene, ethylbenzene, and xylenes (BTEX). Benzene sorption isotherms and saturated vapor adsorption experiments were utilized to explore the …

    tamu Repository record for Cyclodextrin-Derived Polymer Networks for Applications in Selective Molecular Adsorption (opens in a new tab)

  20. Optical pressure sensors using interferometric techniques

    … birefringence measurements are demonstrated. The device sensitivity to variations in temperature for these measurement is investigated.

    city-london Download PDF for Optical pressure sensors using interferometric techniques (opens in a new tab)

Page 1 of 3