Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 14 of 14 for “"Diamond Coating"”.

  1. Adhesion Enhancement of Diamond Coating on WC-Co Substrates Through Interlayer Design

    Diamond coating with sufficient adhesion on WC-Co cutting tools is expected to significantly increase their cutting performance. However, the adhesion is always limited by the formation of graphitic soot in the interface due to the catalytic effect of Co on graphite formation. Moreover, the low …

    sask Repository record for Adhesion Enhancement of Diamond Coating on WC-Co Substrates Through Interlayer Design (opens in a new tab)

  2. Interface Engineered Diamond Coatings for Dry Machining Applications

    … have been propose to improve the adhesion of diamond films on cemented carbide tool materials, however a systematic study in identifying the role of the factors that affect the final diamond adhesion and the resulting machining performance of the tool under real manufacturing conditions is …

    usf Repository record for Interface Engineered Diamond Coatings for Dry Machining Applications (opens in a new tab)

  3. Growing diamond on unusual substrates

    Diamond growth via chemical vapour deposition (CVD) is a powerful method, unlocking diamond’s extreme properties to be used for a huge range of applications. Within this thesis, CVD diamond growth is performed on a variety of uncommon substrates.<br/>Nanostructured surfaces can have bactericidal …

    bristol Repository record for Growing diamond on unusual substrates (opens in a new tab) Download PDF for Growing diamond on unusual substrates (opens in a new tab)

  4. Chemistry of novel nanoscale carbon materials: Nanodiamond and carbon nano-onions

    … novel nanostructures in the carbon family: nanodiamond and carbon nano-onions. Nanodiamond is relatively a new engineering material with particular applications for fabrication of wear-resistant surface coatings, lubricating films and prototypes field emission displays. These materials are also …

    rice Repository record for Chemistry of novel nanoscale carbon materials: Nanodiamond and carbon nano-onions (opens in a new tab)

  5. An investigation into interface behavior and delamination wear for diamond-coated cutting tools

    The goal of this research is to enhance the diamond-coated cutting tool performance through fundamental understanding of the interface adhesion of chemical vapor deposition (CVD) diamond-coated tungsten carbide cutting tools. CVD diamond-coated cutting tools have the advantages of superior …

    alabama Repository record for An investigation into interface behavior and delamination wear for diamond-coated cutting tools (opens in a new tab)

  6. Diamond-coated carbon fibres, the new generation of composites (CFRP)?

    … CFRP components. To achieve this, highly doped diamond conductor grains are incorporated between the CF rows. This induces transverse conductive percolation between the CFs. The highly doped diamond is deposited as a polycrystalline coating on the surface of the carbon fibres prior to CFRP …

    cadiz Repository record for Diamond-coated carbon fibres, the new generation of composites (CFRP)? (opens in a new tab)

  7. Simulation Studies of Single Event Effects in β-Ga2O3 MOSFETs and Schottky Diodes

    … hardening technique was proposed using a diamond coating layer which helps to reduce the temperature below the melting point of Ga2O3. Our simulations suggest that though the current recovers to safe operating limits for all radiation conditions, the failure mechanism is governed by the …

    buffalo Repository record for Simulation Studies of Single Event Effects in β-Ga2O3 MOSFETs and Schottky Diodes (opens in a new tab)

  8. Protecting Diamond Indenters for Nanoindentation Between 400-750°C Using Titanium

    … to the most common nanoindenter material, diamond, is not due to diamond changing to graphite in air, which can happen above 750°C, but to the reaction of the nanoindenter with the sample, causing a change in the geometry. The nanoindentation methodology is very sensitive to a change in …

    mcmaster Repository record for Protecting Diamond Indenters for Nanoindentation Between 400-750°C Using Titanium (opens in a new tab)

  9. A study of tool wear in turning of pure aluminum and drilling of CFRP/titanium stacks

    … wear were investigated on uncoated WC-Co drills, diamond coated drills, AlMgB14 (BAM) coated drills and nano-composite coated drills. There were two significant findings in the CFRP-only drilling study. First, edge rounding was found to be the main tool wear mode for all types of drills. A …

    msu Repository record for A study of tool wear in turning of pure aluminum and drilling of CFRP/titanium stacks (opens in a new tab)

  10. Diamond Seeding Process for the Heterogenous Integration of High Quality Diamond on Semiconductors

    Diamond thin films grown by chemical vapor deposition (CVD) have a wide band gap, high hardness, chemical inertness, and high thermal conductivity, making them an attractive material for a wide range of applications. Due to high surface energy and low sticking probability of diamond, it is …

    texas-state Repository record for Diamond Seeding Process for the Heterogenous Integration of High Quality Diamond on Semiconductors (opens in a new tab)

  11. An investigation of diamond thin film deposition on steel substrates

    … work was the exploration of the possibility of diamond deposition on steel substrates for low friction and low wear applications. Materials such as tungsten carbide are commercially available as diamond coated tools, where the diamond coating greatly extends the tool lifetime and performance. …

    aston Download PDF for An investigation of diamond thin film deposition on steel substrates (opens in a new tab)

  12. VÝVOJ NÁSTROJŮ S PKD, CVD VRSTVOU A CVD POVLAKEM PRO DOKONČOVÁNÍ DĚR

    Obsahem této práce je návrh, provedení a vyhodnocení experimentu, který ověří užitné vlastnosti nově vyvinutých nástrojů firmy HAM-FINAL, které jsou osazeny břity z polykrystalického diamantu (PKD) a CVD diamantu. Teoretická část práce se zabývá materiály řezných nástrojů se zaměřením na diamantové …

    brno-tech Repository record for VÝVOJ NÁSTROJŮ S PKD, CVD VRSTVOU A CVD POVLAKEM PRO DOKONČOVÁNÍ DĚR (opens in a new tab)