Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 20 for “"Differential Pairs"”.

  1. A low power, high dynamic-range, broadband variable gain amplifier for an ultra wideband receiver

    A fully differential Complementary Metal-Oxide Semiconductor (CMOS) Variable Gain Amplifier (VGA) consisting of complementary differential pairs with source degeneration, a current gain stage with programmable current mirror, and resistor loads is designed for high frequency and low power …

    tamu Repository record for A low power, high dynamic-range, broadband variable gain amplifier for an ultra wideband receiver (opens in a new tab)

  2. Design of rail-to-rail operational amplifier using XFAB 0.35µm process

    … amplifier composed of complementary CMOS differential pairs is employed to obtain a wider input common mode range. However, the complementary differential pairs, when operated in parallel lead to a large variation in the total transconductance thereby making the circuit highly unstable. A …

    umn Repository record for Design of rail-to-rail operational amplifier using XFAB 0.35µm process (opens in a new tab)

  3. Algorithmic studies on PCB routing

    … few works discuss the escape routing problem of differential pairs. In high-performance PCBs, many critical nets use differential pairs to transmit signals. How to escape differential pairs from a pin array is an important issue that has received too little attention in the literature. In this …

    uiuc Repository record for Algorithmic studies on PCB routing (opens in a new tab)

  4. Exploiting the bulk-driven approach in CMOS analogue amplifier design

    … approach are focused – at the input-stage of differential pairs, at the source followers, and at the cascode devices. For the input stage of differential pairs, this thesis proposes two new novel circuit design techniques. One of them utilises the concept of the replica-biased scheme in order …

    westminster Repository record for Exploiting the bulk-driven approach in CMOS analogue amplifier design (opens in a new tab) Download PDF for Exploiting the bulk-driven approach in CMOS analogue amplifier design (opens in a new tab)

  5. MCML gate design methodology ante the tradeoffs between MCML and CMOS applications

    … steering a constant bias current through a fully differential network of input transistors. The proposed methodology uses the quadratic transistor model to find the first design solution, through SPICE simulations, make decisions and resizes the gate to obtain the required solution. The method …

    brazil-ufrgs Repository record for MCML gate design methodology ante the tradeoffs between MCML and CMOS applications (opens in a new tab)

  6. An Open-Loop Amplifier Multi-Bit Sigma Delta Modulator

    … amplifier multi-bit sigma delta modulator uses differential pairs for its loop filter instead of closed-loop amplifiers that consume considerable power for high frequency applications. The open-loop amplifier multi-bit sigma delta modulator is designed with a 90nm CMOS process. The achievable …

    tamu Repository record for An Open-Loop Amplifier Multi-Bit Sigma Delta Modulator (opens in a new tab)

  7. Wideband active MMIC baluns -concepts and design

    … combines a common-gate common-source with a differential pair, resulting in a balanced output with a common mode rejection ratio (CMRR) above 22 dB. The second concept combines three differential pairs, resulting in a CMRR of above 26.5 dB. The third concept consists of two parallel connected …

    chalmers Repository record for Wideband active MMIC baluns -concepts and design (opens in a new tab)

  8. Amplifier topologies for ultra low voltage applications

    … voltages. In this work, single ended and fully differential amplifier topologies for voltage supplies in the range of few hundreds mV were proposed. The proposed approaches use the pseudo differential pairs with the transistor bulk terminals with forward biasing voltages for several purposes, …

    brazil-ufrgs Repository record for Amplifier topologies for ultra low voltage applications (opens in a new tab)

  9. Application of two frameworks--Physics and Signal Processing--as a Basis for Efficient Designs in Physical Computing

    … to practical systems such as analog filters, differential pairs, synchronized chaotic circuits, and frequency synthesizers. My thesis demonstrates how physical computing can exploit nonlinearities and time-variance (what I call LTI-breaking) to achieve matter-energy-information efficiency, …

    gatech Repository record for Application of two frameworks--Physics and Signal Processing--as a Basis for Efficient Designs in Physical Computing (opens in a new tab)

  10. Low voltage / low power rail-to-rail CMOS operational amplifier for portable ECG

    … overcome the reduced ICMR problem, complementary differential pairs operated in parallel are commonly used to achieve a rail-to-rail input common mode range. However, this complementary differential input pair structure can have a substantial transconductance (gm) variation problem and a dead zone …

    umn Repository record for Low voltage / low power rail-to-rail CMOS operational amplifier for portable ECG (opens in a new tab)

  11. Vibrotactile Feedback for Application on Mobile Touch Screen Devices: Effects with Age

    … out, it was found that two of the seven semantic differential pairs tested, ‘slow-fast’ and ‘light-heavy’, are suitable to describe the feelings of haptic feedback for younger people however there was no clear agreement for older people. It is recommended that the magnitude estimation techniques …

    whiterose Download PDF for Vibrotactile Feedback for Application on Mobile Touch Screen Devices: Effects with Age (opens in a new tab)

  12. Dynamic amplifiers for analog-to-digital converters

    … fewer comparators and needs fewer sets of input differential pairs. Offset cancellation is achieved by switching references (only during calibration) without extra loading at the input or the clock generator circuitry. The efficacy of this technique is demonstrated by simulating a 4 bit …

    uiuc Repository record for Dynamic amplifiers for analog-to-digital converters (opens in a new tab)

  13. An analog approach to interference suppression in ultra-wideband receivers

    … by using tunable level shifters and a single differential pair. Feedback circuitry controls the level shifters in a manner that fixes the common mode input of the differential pair, resulting in consistent and stable operation for rail-to-rail inputs. As the new technique avoids using …

    tamu Repository record for An analog approach to interference suppression in ultra-wideband receivers (opens in a new tab)

  14. Low-Voltage Bulk-Driven Amplifier Design and Its Application in Implantable Biomedical Sensors

    … circuit employs auxiliary bulk-driven input differential pairs to achieve the input transconductance comparable with the traditional gate-driven amplifiers, without consuming a large amount of current. The prototype measurement results show significant improvements in the open loop gain …

    utk-theses Repository record for Low-Voltage Bulk-Driven Amplifier Design and Its Application in Implantable Biomedical Sensors (opens in a new tab)

  15. The Design of High-Frequency Continuous-Time Integrated Analog Signal Processing Circuits

    … methods are proposed. One uses cross-coupled pairs (CMOS or NMOS), producing OTAs with very high linearity but either the input range is relatively small or the CMR to asymmetrical inputs is poor. Another employs multiple differential pairs (current addition or subtraction), producing OTAs …

    portland-state Repository record for The Design of High-Frequency Continuous-Time Integrated Analog Signal Processing Circuits (opens in a new tab)

  16. Frequency Locking Techniques Based on Envelope Detection for Injection-Locked Signal Sources

    … is proposed. Two capacitively-degenerated differential pairs are utilized for quadrature injection signals, thereby increasing injection-locking range and reducing phase error. Next, an injection-locked clock multiplier using an envelope-based frequency tracking loop is presented for a low …

    vt Repository record for Frequency Locking Techniques Based on Envelope Detection for Injection-Locked Signal Sources (opens in a new tab)

  17. Analysis and Optimization of High Performance PAM Wireline Receiver: From Clock Dynamics to Front-End Linearity

    … the linearity performance of source-degenerated differential pairs, a key circuit which is widely used in wireline communication in different configurations. The suitability of three metrics to quantify the nonlinearity of the receiver analog front-end is evaluated. The analysis identifies the …

    toronto-retro Repository record for Analysis and Optimization of High Performance PAM Wireline Receiver: From Clock Dynamics to Front-End Linearity (opens in a new tab)

  18. Integration of broadband direct-conversion quadrature modulators

    … result of mismatches, from the use of inaccurate differential signaling, and from inadequacies in the phasing circuitry itself. A 2° phase error is easily produced, and it reduces the image-rejection ratio (IRR) to −30 dBc. Therefore, as baseband signals synthesized by digital signal processing …

    aalto Repository record for Integration of broadband direct-conversion quadrature modulators (opens in a new tab)

  19. A Matched Filter and Coherent Digitizer for Pulsed Doppler Radar Systems

    … A continuous-time filter based on current-reuse differential difference amplifiers, which is used as an anti-alias filter, will be presented. The two differential pairs in the differential difference amplifier process two independent input signals but share the same output and bias current. To …

    tamu Repository record for A Matched Filter and Coherent Digitizer for Pulsed Doppler Radar Systems (opens in a new tab)

  20. Design of Power Management Integrated Circuits and High-Performance ADCs

    … proposed unified amplifier is based on stacked differential pairs which share the bias current. Its current-steering property removes multiple amplifiers for regulation and the CC-CV transition, and achieves high unity-gain loop bandwidth for fast regulation. The charger with the maximum …

    tamu Repository record for Design of Power Management Integrated Circuits and High-Performance ADCs (opens in a new tab)