Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 143 for “"Differential Scanning Calorimeter"”.

  1. Micromachined Differential Scanning Calorimeter for Cellular Differentiation and Metabolism Monitoring

    This thesis presents a micromachined differential scanning calorimeter (DSC) for cellular differentiation and metabolism monitoring. The misregulation of cell physiology due to disease increases the metabolic rate of the cell and therefore its heat output. Observing or monitoring the cell's heat …

    marquette Repository record for Micromachined Differential Scanning Calorimeter for Cellular Differentiation and Metabolism Monitoring (opens in a new tab)

  2. The Development of High-Throughput and Miniaturized Differential Scanning Calorimeter for Thermodynamic Study of Bio-Molecules

    … is focused on a high-through and miniaturized differential scanning calorimeter for thermodynamic study of bio-molecules using MEMS techniques. The dissertation firstly introduces the overall design and operation principles. This miniaturized DSC was fabricated based on a polyimide (PI) thin …

    vt Repository record for The Development of High-Throughput and Miniaturized Differential Scanning Calorimeter for Thermodynamic Study of Bio-Molecules (opens in a new tab)

  3. Characterization of the structure and substructure of thermally transformation cycled Cu-Zn-Al shape memory alloys

    … were thermally cycled up to 10 times, using a differential scanning calorimeter, between the parent and martensite phases. The trends of transformation temperature versus number of cycles were correlated with observed microstructure . Specimens were examined through transmission electron …

    nps Repository record for Characterization of the structure and substructure of thermally transformation cycled Cu-Zn-Al shape memory alloys (opens in a new tab)

  4. Capillary rheometry of soy isolate dough

    … isolate dough are measured using a Perkin-Elmer Differential Scanning Calorimeter (DSC-2) over 310 to 350K. The observed behavior of the soy isolate doughs is explained in terms of a network based on temporary crosslinks, possibly hydrogen bonds. Additionally, factors which complicate viscosity …

    vt Repository record for Capillary rheometry of soy isolate dough (opens in a new tab)

  5. Sulfate Induced Heave: Addressing Ettringite Behavior in Lime Treated Soils and in Cementitious Materials

    … with calcium-based stabilizers. The use of a differential scanning calorimeter was introduced in this research as a tool to quantify the amount of ettringite formed in stabilized soils. The first part of this dissertation provides a case history analysis of the expansion history compared to …

    tamu Repository record for Sulfate Induced Heave: Addressing Ettringite Behavior in Lime Treated Soils and in Cementitious Materials (opens in a new tab)

  6. A Study of the Flammability of Chlorinated Polyethylene by Thermal Analysis

    … were a Thermogravimetric Analyzer (TGA), and a Differential Scanning Calorimeter (DSC). To study the gaseous products evolved during thermal decomposition of the polymer Fourier Transform Infrared Spectrophotometry (FTIR) and Gas Chromatography (GC) data were obtained. The results obtained …

    wku-diss Repository record for A Study of the Flammability of Chlorinated Polyethylene by Thermal Analysis (opens in a new tab)

  7. Design and Analysis of New Gasification Apparatus based on the Standard Cone Calorimeter

    … apparatus is developed base on the standard cone calorimeter (ASTM E 1354). A controllable oxygen concentration (0% to 21% by volume) environment in the vicinity of 80 mm by 80 mm square sample positioned under the cone radiant heater is achieved by means of "Controlled Atmosphere Pyrolysis …

    maryland Repository record for Design and Analysis of New Gasification Apparatus based on the Standard Cone Calorimeter (opens in a new tab)

  8. Evaluation of superelastic nitinol as a shielding material for hypervelocity impact

    … transformation and through plastic yielding. Differential scanning calorimeter studies demonstrated that stress induced Martensite (SIM) is present in the hypervelocity impacted samples. Optical metallography and electron microscopy studies confirm the presence of SIM.

    rice Repository record for Evaluation of superelastic nitinol as a shielding material for hypervelocity impact (opens in a new tab)

  9. Thermal Performance of Microencapsulated Phase Change Material Slurry

    … to characterize the MPCM slurry, including a differential scanning calorimeter, a temperature-controlled concentric viscometer, and a well-calibrated heat transfer loop. Results indicate that the use of an effective nucleating agent is necessary to prevent a large amount of supercooling of the …

    uiuc Repository record for Thermal Performance of Microencapsulated Phase Change Material Slurry (opens in a new tab)

  10. Characterization of gamma prime precipitates in a powder metallurgy nickel-based superalloy

    … JMatPro sofware (1040?C), and verified using a Differential Scanning Calorimeter (1092?C). Precise temperature control was found to be more important to control material properties than exact ageing times. Using an Atomic Force Microscope, precipitates in the nanometer range were imaged, and …

    manitoba Repository record for Characterization of gamma prime precipitates in a powder metallurgy nickel-based superalloy (opens in a new tab)

  11. Calibration of a Materials Informatics Database for Prediction of Mechanically Activated Amorphization in Small Molecule Organic Solids and Sample Porosity Corrections of MDSC Thermal Conductivity Measurements

    … correction model using a standard modulated differential scanning calorimeter was developed for the measurement of the thermal conductivities of pharmaceutical small molecule organic solids. Logistic regression analysis method was applied to identify those critical materials properties that …

    duquesne Repository record for Calibration of a Materials Informatics Database for Prediction of Mechanically Activated Amorphization in Small Molecule Organic Solids and Sample Porosity Corrections of MDSC Thermal Conductivity Measurements (opens in a new tab)

  12. Preparation and Characterization of Thermodynamically Controlled Polymer Nanocomposites

    … The resulting materials were characterized by differential scanning calorimeter and atomic force microscopy and the role of the grafted polymer composition on the glass transition temperature of the nanocomposites and the dispersion state of the nanoparticles was examined. These results provide …

    ut-knoxville Repository record for Preparation and Characterization of Thermodynamically Controlled Polymer Nanocomposites (opens in a new tab)

  13. Polyurethane foams from novel soy-based polyols

    … A dynamic mechanical spectrometer (DMS) and a differential scanning calorimeter (DSC) were used to characterize the hard segment (HS) and soft segment (SS) ratio and thermal properties of plastic. Various functional groups in both flexible polyurethane foam and plastic film were characterized …

    missouri Repository record for Polyurethane foams from novel soy-based polyols (opens in a new tab)

  14. Development of eco-friendly flame retardant fabric using phosphorus based intumescence chemistry

    … Fourier transform infrared spectroscopy (FTIR), Differential scanning calorimeter (DSC), and Thermogravemetric analysis (TGA) testing instruments. Vertical flammability testing was performed as per ASTM D-6413 standards to test the fabric for its flame retardancy. Tensile testing of the coated …

    emich Repository record for Development of eco-friendly flame retardant fabric using phosphorus based intumescence chemistry (opens in a new tab)

  15. In-Situ Measurement of Resin Shrinkage for Aerospace Components

    … observed for Epoxy 105 and 0.01042 for EPON 862. Differential Scanning Calorimeter (DSC) is used to measure the degree of cure for the two epoxies, and to correlate resin shrinkage to the cure state. We also observed the effect of fibers on the shrinkage of the resin using carbon fiber, glass …

    embry-riddle Repository record for In-Situ Measurement of Resin Shrinkage for Aerospace Components (opens in a new tab)

  16. Scale effects on the latent heat of phase change & the effect of dynamic contact angles on dynamic capillary pressure

    … using a Thermogravimetric Analysis/Differential Scanning Calorimeter available in the core facilities of the Texas Materials Institute. This verified that the latent heat of vaporization for water confined nano-pores decreases with pore size. A model for dynamic capillary pressure in …

    texas Repository record for Scale effects on the latent heat of phase change & the effect of dynamic contact angles on dynamic capillary pressure (opens in a new tab)

  17. Aluminum Particle Reactivity as a Function of Alumina Shell Structure: Amorphous versus Crystalline

    … under equilibrium heating conditions using a differential scanning calorimeter (DSC) and are called pre-ignition reactions (PIR). Recent work indicates that if the Al2O3 shell is transitioned from its original amorphous phase into a crystalline phase, the PIR and main oxidation reactions both …

    ttu Repository record for Aluminum Particle Reactivity as a Function of Alumina Shell Structure: Amorphous versus Crystalline (opens in a new tab)

Page 1 of 8