Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 74 for “"Diffusion bonding"”.
-
Refractory metals low temperature diffusion bonding
In this dissertation, the minimization of the diffusion bonding temperature during refractory metals’ diffusion bonding process was studied. Two pure refractory metals were used in this study: molybdenum and tungsten. The influence on the joint quality of molybdenum structural conditions, as well …
-
Statistical Analysis Of Diffusion Bonding Nickel Using Brass Interlayers
… goal of this project is a statistical study of diffusion bonding of commercially pure Ni with a brass interlayer. Four factors were investigated; time, temperature, surface finish, and foil thickness. A Box-Behnken design was selected to analyze the system for composition and strength of the …
-
Modeling and Experimental Analysis of Superplastic Forming and Diffusion Bonding
Superplastic forming and diffusion bonding is a well-established manufacturing process. It has been implemented with a variety of materials. This work specifically deals with titanium which, while being a very useful aerospace material, and is commonly used with both superplastic on diffusion …
-
High temperature diffusion bonding of single crystal sapphire to polycrystalline alumina
Includes bibliographical references (pages 76-77).
-
The Diffusion Bonding of Dissimilar Titanium Alloy Powders using Field Assisted Sintering Technology
A novel processing method for diffusion bonding dissimilar titanium alloy powders, termed as FAST-DB, has been assessed to determine its viability as an industrial-scale process in the future. Small-scale 20 mm diameter trials were initially used to demonstrate the possibility of diffusion bonding …
-
High temperature behavior of Ni₃Al under compressive stress: creep and diffusion bonding
Thesis (Ph. D.)--Michigan State University. Department of Metallurgy, Mechanics, and Materials Science, 1991
-
Diffusion Bonding of Inconel 600 to Silicon Carbide for Next Generation High Temperature Applications
… and the properties of the joints produced by diffusion bonding is essential for developing reliable ceramic to metal interfaces. The combination of silicon carbide (SiC) and a nickel-based alloy (Inconel 600) offers improved strength and resistance to high temperature degradation. This work …
-
Transient Liquid Phase Diffusion Bonding of Magnesium Alloy (Mg-AZ31) to Titanium Alloy (Ti-6Al-4V)
… welding techniques. Transient liquid phase (TLP) bonding of magnesium alloy Mg-AZ31 and titanium alloy Ti-6Al- 4V was performed and different interlayer types and configurations were used to facilitate joint formation. The joining of these alloys using Ni foils was successful at a bonding …
-
Study of the Mechanical Performance of Similar and Dissimilar Titanium Alloy Joints Formed by Diffusion Bonding and Friction Stir Welding
… to fly ratio. Among the various joining methods, Diffusion Bonding and Friction Stir Welding (FSW) can be combined with superplastic forming, therefore, have been widely accepted technique to join titanium alloys to produce complex sheet structures with reduced weight and fabrication costs …
-
Effect of Heat Treatment on the Diffusion Bonding of NiTi to Ti-6Al-4V and the Mechanical Properties of the Bond Zone
… but little work has been done on their bonding characteristics. Thus, the purpose of this study was to investigate the effect of diffusion bonding heat treatment on the development of the bond zone and its mechanical properties for these two materials. To do this the development of the …
-
Liquid-phase diffusion bonding and the development of a Cu-Ni/Sn composite solder paste for high temperature lead-free electrical connections
… solder could be produced through liquid-phase diffusion bonding (LPDB) of gas-atomized Cu-Ni powder blended with SN100C (Sn-0.7Cu-0.05Ni, wt.%) commercial solder powder, additional research was completed to enable design of a prototype composite solder paste. By reviewing several experimental …
-
Study to determine the feasibility of joining metals to metal matrix composites using a novel new process of friction liquid upset diffusion bonding, A
Includes bibliographical references (pages 139-142).
-
The effect of processing parameters on the formation of titanium-titanium aluminide laminated metal composites
… been assessed via two mechanisms of formation: diffusion bonding and self propagating high temperature synthesis (SHS). Alternating layers of commercial purity aluminum and titanium foils were diffused or reacted at temperatures ranging from 575C to 640C to form a layer of titanium aluminide …
-
Strength, ultrasonic and metallurgical evaluation of diffusion bonds of dissimilar materials
<p>Diffusion bonding is a well known metallurgical joining technique which allows materials to be bonded together to near net shape. Diffusion bonds between dissimilar materials are of unique interest due to the complex interactions at the bond line. Previous experimental work has shown that the …
-
A Study of Diffusional Bonding Between Ti-6Al-4V Alloy and Ni-Ti Alloy
… described in this thesis deals mainly with the diffusion bonding of Ti-6Al-4V alloy to NiTi alloy. The aerospace alloy Ti-6Al- 4V has several excellent properties including high strength, corrosion resistance, and bio-compatibility, which make it desirable for surgical implants such as …
-
Study of Void Growth in Commercially Pure Titanium
… using a femtosecond laser coupled with a diffusion bonding technique to obtain voids in the interior of titanium samples. Diffusion bonding was carried out either above or below the phase transformation temperature resulting in different microstructures. Changes in void dimensions during …
-
Development of Advanced High Modulus Steels for Automotive Applications
… although additions of TiB2 impeded full diffusion bonding, resulting in incomplete densification and brittle fracture behaviour in the MASC consolidated sample. Microscopy analysis confirmed the role of TiB2 as a diffusion barrier. FAST demonstrated improved densification and diffusion …
Page 1 of 4