Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 15 of 15 for “"Diffusion mass transfer"”.

  1. Transient Pressure Modeling for CO2 Miscible Flooding Processes

    … flooding process by incorporating a convection–diffusion mass transfer model with a transient pressure model. This thesis first compares four existing analytical methods with different pressure and time formation to a gas reservoir and determines the most suitable model for CO2 bank during a …

    regina Repository record for Transient Pressure Modeling for CO2 Miscible Flooding Processes (opens in a new tab) Download PDF for Transient Pressure Modeling for CO2 Miscible Flooding Processes (opens in a new tab)

  2. Rational design of materials and cell configuration for metal (Li/Na/Mg)-sulfur batteries

    … sponge is also prepared to facilitate ion diffusion/mass transfer of Na-S batteries, and to provide reservoir to adsorb polysulfides. The last section presents Mg-S batteries with a dual-doped (Co and N) Lychee-like sulfur host (Co@NC) to effectively mitigate magnesium polysulfides …

    unsw Repository record for Rational design of materials and cell configuration for metal (Li/Na/Mg)-sulfur batteries (opens in a new tab)

  3. Protein Capture by Cation Exchange Membranes

    … mAbs but are extremely costly, limited by pore diffusion mass transfer and may lead to leaching of the Protein-A ligand in the eluted product stream. To overcome these issues, alternative strategies without Protein-A or resin chromatography, are being investigated to achieve similar or improve …

    waterloo Repository record for Protein Capture by Cation Exchange Membranes (opens in a new tab)

  4. Effect of Excess Calcium Content on the Dissolution Rate of Dolomites in Hydrochloric Acid

    … from the surface reaction rate to predominantly diffusion (mass transfer) limited. Results also indicate that: (1) Ca content in dolomites varies widely, even within the same formation or well, and (2) composition and corresponding reactivity of dolomites should be considered when designing …

    tamu Repository record for Effect of Excess Calcium Content on the Dissolution Rate of Dolomites in Hydrochloric Acid (opens in a new tab)

  5. Bioavailability of endocrine disrupting chemicals (EDCs): liposome-water partitioning and lipid membrane permeation

    … of fish. The thickness of the aqueous mass transfer boundary layer was carefully adjusted to mimic bioconcentration rate parameters in small fish. For the selected twenty-three simple aromatic hydrocarbons, literature absorption/elimination rates fall within the range predicted from …

    texas Repository record for Bioavailability of endocrine disrupting chemicals (EDCs): liposome-water partitioning and lipid membrane permeation (opens in a new tab)

  6. Modeling of fluid flow in spiral wound reverse osmosis membranes

    … based on profoundly interacting fluid flow and mass transfer phenomena. These phenomena are modeled without approximation, and the model is implemented by numerical simulation. The numerous oversimplifications of prior models have been eliminated. In particular, the linearity that marked those …

    umn Repository record for Modeling of fluid flow in spiral wound reverse osmosis membranes (opens in a new tab)

  7. Fluorescent nanosphere transport: groundwater tracing and implications for nanoparticle migration through groundwater systems

    … that CNP may undergo slightly less transverse diffusion (mass transfer) into the immobile zone than the solute tracer Br. However the differences were less than expected because molecular diffusion was overwhelmed by the high pore velocities in the experiments. The results of the reactive media …

    colostate Repository record for Fluorescent nanosphere transport: groundwater tracing and implications for nanoparticle migration through groundwater systems (opens in a new tab)

  8. Enhanced Solvent Vapour Extraction processes in Thin Heavy Oil Reservoirs

    … concentration, oil drainage velocity, and diffusion coefficient across the transition zone, but also to predict the evolution of the solvent chamber. Theoretical modeling of the diffusionconvection mass transfer in CSI. CSI is a solvent huff-n-puff process. One of the differences between …

    regina Repository record for Enhanced Solvent Vapour Extraction processes in Thin Heavy Oil Reservoirs (opens in a new tab) Download PDF for Enhanced Solvent Vapour Extraction processes in Thin Heavy Oil Reservoirs (opens in a new tab)

  9. New Calibration Approaches in Solid Phase Microextraction for On-Site Analysis

    … microextraction (SPME) were developed based on diffusion mass transfer theory. This was investigated using adsorptive polydimethylsiloxane/divinylbenzene (PDMS/DVB) and Carboxen/polydimethylsiloxane (CAR/PDMS) SPME fiber coatings with volatile aromatic hydrocarbons (BTEX: benzene, toluene, …

    waterloo Repository record for New Calibration Approaches in Solid Phase Microextraction for On-Site Analysis (opens in a new tab)

  10. Study Of The Effect Of Surface Morphology On Mass Transfer And Fouling Behavior Of Reverse Osmosis And Nanofiltration Membrane Processes

    … (NF) membranes are pressure driven, diffusion controlled process. The influence of surface characteristics on membrane process performance is considered significant and is not well understood. Current mass transport models generally assume constant mass transfer coefficients (MTCs) …

    ucf Repository record for Study Of The Effect Of Surface Morphology On Mass Transfer And Fouling Behavior Of Reverse Osmosis And Nanofiltration Membrane Processes (opens in a new tab)

  11. Investigation of microparticle to system level phenomena in thermally activated adsorption heat pumps

    … by adsorbing refrigerant in a sorption bed heat/mass exchanger, transient models must be used to predict performance. In this thesis, such models are developed at the adsorbent particle level, heat/mass exchanger component level and system level. Adsorption heat pump modeling is a coupled heat …

    gatech Repository record for Investigation of microparticle to system level phenomena in thermally activated adsorption heat pumps (opens in a new tab)

  12. Local Variation of Heat and Mass Transfer for Flow Over a Cavity and on a Flat Plate

    … to our understanding of fluid flow and heat transfer. However, most of the experimental and analytical work for thermal boundary layers focus on streamwise effects. Lateral changes of heat and mass transfer near a lateral singularity in the surface boundary conditions have not been as …

    umn Repository record for Local Variation of Heat and Mass Transfer for Flow Over a Cavity and on a Flat Plate (opens in a new tab)

  13. Pressurized low polarity water extraction of lignans, proteins and carbohydrates from flaxseed meal

    … the extraction rate by increasing the solid diffusion coefficient thereby reducing the extraction time. The maximum yield of lignans (99 %) was obtained at temperatures ranging from 160°C to 190°C, with solvent volume of 180 mL (90 mL/g meal) at pH 9. Optimal conditions for protein extraction …

    manitoba Repository record for Pressurized low polarity water extraction of lignans, proteins and carbohydrates from flaxseed meal (opens in a new tab)