Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 39 for “"Digital Receivers"”.

  1. Iterative decoding techniques on digital receivers

    … are becoming more and more essential. Digital Communications, Information Theory, and Error Correction Codes are the main research areas that study how to achieve such a goal. Many error correction codes have been presented in the past, but in recent years a class of codes has imposed …

    greece Repository record for Iterative decoding techniques on digital receivers (opens in a new tab)

  2. An analysis of coherent digital receivers in a jamming environment.

    … jammer waveforms on known optimum coherent digital receivers is analyzed and evaluated in terms of receiver performance. The optimum jaaner waveform for the specified receiver is derived and several jamming strategies are studied and compared to the optimum case. These jammer waveforms …

    nps Repository record for An analysis of coherent digital receivers in a jamming environment. (opens in a new tab)

  3. An analysis of jamming effects on non-coherent digital receivers.

    … waveforms on conventional binary incoherent digital receivers was analyzed in terms of resulting receiver performance (i.e., receiver probability of error) . Probability density functions associated with the test statistic generated by incoherent receivers under the influence of noise and …

    nps Repository record for An analysis of jamming effects on non-coherent digital receivers. (opens in a new tab)

  4. Adaptive signal subspace digital receivers for communication in time-varying noise

    … Matched Filter (MAMF) receiver system for digital communications in an environment where the noise conditions are unknown a priori and change constantly and significantly with time. The MAMF is a subset of the class of matched filters which are optimal with respect to enhancing the signal …

    vt Repository record for Adaptive signal subspace digital receivers for communication in time-varying noise (opens in a new tab)

  5. DoA Estimation in Hybrid Analog and Digital Receivers using Orthogonal Analog Combiners.

    … of mul- tiple sources in a hybrid analog and digital (HAD) receiver with both fully-connected (FC) and partially connected (PC) architectures. In HAD receivers, analog combiners project the received signal on a particular subspace. There can be DoAs in which the received signals will be …

    carleton Repository record for DoA Estimation in Hybrid Analog and Digital Receivers using Orthogonal Analog Combiners. (opens in a new tab)

  6. An analysis of coherent digital receivers in the presence of colored noise interference.

    Optimum receivers for detecting binary signals in additive colored Gaussian noise are analyzed and their performance evaluated in terms of bit error probabilities (Pₑ) . Implementation and practical design implications of such receivers is discussed, Evaluation of P for receivers that are optimum …

    nps Repository record for An analysis of coherent digital receivers in the presence of colored noise interference. (opens in a new tab)

  7. Jamming effects on M-ary coherent and binary noncoherent digital receivers using random jammer models

    … waveforms on both coherent and noncoherent digital communications receivers. Specifically,, random processes are utilized as jamming models in which it is assumed that the jamming waveforms have been produced by a shaping filter driven by white Gaussian noise. Such jamming waveforms are then …

    nps Repository record for Jamming effects on M-ary coherent and binary noncoherent digital receivers using random jammer models (opens in a new tab)

  8. Phase, Frequency, and Timing Synchronization in Fully Digital Receivers with 1-bit Quantization and Oversampling

    … new challenges for the design of analog-to-digital converters (ADCs) since high bandwidths imply high sampling rates. For sampling rates larger than 300MHz, which we now achieve with 5G, the ADC power consumption per conversion step scales quadratically with the sampling rate. Thus, ADCs …

    qucosa-diss

  9. DoA Estimation with Full Spatial Coverage in Hybrid Analog/Digital Receivers Under Relaxed and Stringent Snapshot Constraints

    … (DoA) of received signals of hybrid analog/digital (HAD) receivers. Two cases are investigated: 1) when the number of available snapshots is sufficient to enable reliable statistical averaging, and 2) when the number of snapshots is too small for statistical averaging to be reliable. In both …

    carleton Repository record for DoA Estimation with Full Spatial Coverage in Hybrid Analog/Digital Receivers Under Relaxed and Stringent Snapshot Constraints (opens in a new tab)

  10. Design techniques for high-speed low-power wireline receivers

    … channel, sophisticated analog front-end and/or digital signal processing are required at the receiver (RX) to recover data and clock from the received signal. In this thesis, both analog- and digital-based receivers are investigated, and power-reduction techniques are exploited at both system- …

    ubc Repository record for Design techniques for high-speed low-power wireline receivers (opens in a new tab) Download PDF for Design techniques for high-speed low-power wireline receivers (opens in a new tab)

  11. DESIGN OF A COHERENT RECEIVER FOR CONTINUOUS PHASE MODULATION IN RAYLEIGH SLOW FADING CHANNEL

    … has given the impetus to the study of designing digital receivers working in a multipath fading environment. The contention for spectrum allocation leads to the investigation in bandwidth efficient modulation schemes. In this thesis, a coherent receiver structure for MSK, which is a joint …

    nus Repository record for DESIGN OF A COHERENT RECEIVER FOR CONTINUOUS PHASE MODULATION IN RAYLEIGH SLOW FADING CHANNEL (opens in a new tab) Download file for DESIGN OF A COHERENT RECEIVER FOR CONTINUOUS PHASE MODULATION IN RAYLEIGH SLOW FADING CHANNEL (opens in a new tab)

  12. A NOVEL LOW LATENCY, HIGH RESOLUTION AND LOW COST TIME SYNCHRONIZATION

    … low cost timing synchro- nization technique for digital receivers. Traditional timing synchronization employs Matched filter to perform cross-correlation operation and estimate Time-of-Arrival (TOA) of the signal. Decreasing the latency of the traditional method through over- sampling leads to a …

    mtu Repository record for A NOVEL LOW LATENCY, HIGH RESOLUTION AND LOW COST TIME SYNCHRONIZATION (opens in a new tab)

  13. The use of filters in digital coherent receivers operating in a jamming and noise environment

    … use of front-end bandstop filters in coherent digital receivers versus previously derived optimum jarnrner waveforms is analyzed. The receivers studied are the binary frequency shift key (FSK) and binary phase shift key (PSK) coherent (correlator) receivers. The filters analyzed for use against …

    nps Repository record for The use of filters in digital coherent receivers operating in a jamming and noise environment (opens in a new tab)

  14. Extending the dynamic range of a photonic RSNS ADC using a segmentation approach

    The trend in high-performance digital receivers is to configure the analog-to-digital converter (ADC) directly after the antenna and low noise amplifier. Direct digitization of wideband antenna signals can be realized using Mach-Zehnder interferometers (MZI) to efficiently fold the RF signal into …

    nps Repository record for Extending the dynamic range of a photonic RSNS ADC using a segmentation approach (opens in a new tab)

  15. Jamming effects on digital communications receivers (timing errors and frequency errors).

    … for optimum energy constrained jamming of digital receivers is obtained by modeling the jammer as a random process. In the modeling process, a random time arrival or random frequency errors are accounted for by including these effects in the repre- sentation of the jamming waveforms. …

    nps Repository record for Jamming effects on digital communications receivers (timing errors and frequency errors). (opens in a new tab)

  16. Design of a fixed-point polar receiver for OFDM-based wireless LAN

    … implementation-related issues in OFDM-based digital receivers, using the IEEE 802.11a WLAN standard as a specific wireless technology, where the data rate ranges from 6 Mbps to 54 Mbps. Our goal is to expose and exploit the possibility of scaling of the receiver computational complexity in …

    uvic Repository record for Design of a fixed-point polar receiver for OFDM-based wireless LAN (opens in a new tab)

  17. Analysis of low probability of intercept (LPI) radar signals using cyclostationary processing

    … that make them nearly undetectable by today's digital intercept receivers. This presents a significant tactical problem in the battle space. To detect these types of radar, new digital receivers that use sophisticated signal processing techniques are required. This thesis investigates the use …

    nps Repository record for Analysis of low probability of intercept (LPI) radar signals using cyclostationary processing (opens in a new tab)

  18. Quantifying the differences in low probability of intercept radar waveforms using quadrature mirror filtering

    … them to be nearly undetectable by most modern digital intercept receivers. Consequently, LPI radar systems can oper-ate undetected until the intercept receiver is much closer than the radar.s target detector. The enemy is thus faced with a sig-nificant problem. To detect these types of radar, …

    nps Repository record for Quantifying the differences in low probability of intercept radar waveforms using quadrature mirror filtering (opens in a new tab)

Page 1 of 2