Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 48 for “"Dimensional tolerances"”.

  1. Section-specific geometric error evaluation of airfoil blades based on digitized surface data

    … geometric error evaluation task for three-dimensional tolerances of the blades is challenging and not yet well studied by researchers. Particularly, the existing method shows limited effectiveness in detecting position error and difficulty in accurate estimation of orientation error of …

    ubc Repository record for Section-specific geometric error evaluation of airfoil blades based on digitized surface data (opens in a new tab) Download PDF for Section-specific geometric error evaluation of airfoil blades based on digitized surface data (opens in a new tab)

  2. Fast Methods for Millimeter-wave Dielectric Resonator and Antenna Analysis and Design

    … increase due to their higher quality factors and dimensional tolerances. In this thesis, we present fast methods to analyze the millimeter-wave dielectric resonator and rod antenna. First, an analytical method has been developed to evaluate resonant frequencies, quality factors of the Whispering …

    waterloo Repository record for Fast Methods for Millimeter-wave Dielectric Resonator and Antenna Analysis and Design (opens in a new tab)

  3. Posture dependent dynamics in robotic machining

    … severe vibrations, and ultimately violating dimensional tolerances and poor surface finish. Modeling the dynamics of robots under machining (e.g. milling and drilling) forces is essential for reducing deflections and vibrations during the process. Although modeling the dynamics of traditional …

    uvic Repository record for Posture dependent dynamics in robotic machining (opens in a new tab)

  4. Higher-order kinematic error sensitivity analysis and optimum dimensional tolerancing of dyad and non-dyad mechanisms

    … error sensitivity analysis and the synthesis of dimensional tolerance bands for complex planar mechanisms are investigated in this thesis. The initial phase of the research involves developing a novel approach for a computer-aided kinematic analysis of dyad and non-dyad mechanisms. The approach …

    manitoba Repository record for Higher-order kinematic error sensitivity analysis and optimum dimensional tolerancing of dyad and non-dyad mechanisms (opens in a new tab)

  5. Effect of Substrates in the Resistivity and Adhesion of Copper Nanoparticle Ink

    … also conducted to obtain prints conforming to dimensional tolerances. Using the results from the experiments, standard curing parameters for low resistance and good adhesion of the ink were obtained. The results have been statistically validated and used to study the interaction between the …

    rit Repository record for Effect of Substrates in the Resistivity and Adhesion of Copper Nanoparticle Ink (opens in a new tab)

  6. High Frequency Electrochemical Nanopolishing of Alpha Titanium

    … any conducting material while holding close dimensional tolerances. This research develops a high frequency electrochemical nanopolishing technique for commercially pure alpha titanium. An alcohol and salt based electrolyte was used with direct current as well as alternating current on alpha …

    tamu Repository record for High Frequency Electrochemical Nanopolishing of Alpha Titanium (opens in a new tab)

  7. On the feasibility of a novel concept for a free-standing riser

    … studies to check possible installation and dimensional tolerances, assessment of fatigue damage by comparison with conventional risers, development of methodology for determination of the jumper configuration, and checking how the pipe sizes impact the definitions within the design. The …

    brazil-uerj Repository record for On the feasibility of a novel concept for a free-standing riser (opens in a new tab)

  8. Development of Breakdown Test Setup for Liquid and Solid Insulation Materials for High Voltage Cable Accessories

    … also referred to as lubricants, to accommodate dimensional tolerances during installation and reduce local electric field stress. These interfaces are often the weakest point in cable joint, yet standardized breakdown test methods that account for both material types remain limited. This thesis …

    chalmers Repository record for Development of Breakdown Test Setup for Liquid and Solid Insulation Materials for High Voltage Cable Accessories (opens in a new tab)

  9. The machining process of Zircaloy-4 nuclear fuel rod end-caps

    … of ductile materials is galling. If tight dimensional tolerances are required, this issue can result in parts not meeting specifications. Furthermore, an added challenge of Zry-4 is that it has a high probability to ignite during machining if special care is not taken with the chips. Thus, …

    nwu-za Repository record for The machining process of Zircaloy-4 nuclear fuel rod end-caps (opens in a new tab)

  10. Understanding molecular scale effects during photoresist processing

    The dimensional tolerances of photoresist features are now at the nanometer scale, where effects of individual molecules are important. In recognition of the industrial need for a molecular-scale understanding of photoresist performance, mechanistic models have been developed for each of the …

    texas Repository record for Understanding molecular scale effects during photoresist processing (opens in a new tab) Restricted access

  11. Exploring Human Perception in Machining Monitoring

    … machining processes ensures the satisfaction of dimensional tolerances and surface finish requirements, while minimizing tool wear and downtime caused by accidents. Sensor-based automated monitoring systems driven by Artificial Intelligence (AI) trained on extensive datasets have demonstrated …

    rit Repository record for Exploring Human Perception in Machining Monitoring (opens in a new tab)

  12. Non-intrusive pressure measurement in microchannels

    … photodetector sensitivity, and a channel’s dimensional tolerances. The current apparatus readily quantifies fluid RI changes of 10-5 refractive index units (RIU) corresponding to pressures of approximately 14 psi and 1 psi in water and air, respectively. MIBD reports detection capability as …

    mtu Repository record for Non-intrusive pressure measurement in microchannels (opens in a new tab)

  13. Mechanical design and manufacturing of a high speed induction machine rotor

    … also determined the allowable manufacturing dimensional tolerances. From the detail stress analysis it was found that the available lamination and squirrel cage material strengths were inadequate for the design speed specification of 27,000 r/min. The analysis showed that a maximum operating …

    nwu-za Repository record for Mechanical design and manufacturing of a high speed induction machine rotor (opens in a new tab)

  14. Graph-matrix-based automated tolerance analysis and setup planning in computer-aided process planning

    … geometrical characteristics of various types of dimensional and geometrical tolerances are mathematically represented and compared. Tolerance analysis is based on tolerance zone analysis and aims at mathematical representation. The concept of tolerance weight is defined and applied in tolerance …

    ttu Repository record for Graph-matrix-based automated tolerance analysis and setup planning in computer-aided process planning (opens in a new tab)

  15. Spring-in of angled thermoset composite laminates

    … The necessity to produce parts within tight dimensional tolerances in the aerospace industry constitutes a challenge to cost-effective manufacturing as process-induced distortions are encountered in production. The current work focuses on spring-in, a change in angle occurring during …

    ubc Repository record for Spring-in of angled thermoset composite laminates (opens in a new tab) Download PDF for Spring-in of angled thermoset composite laminates (opens in a new tab)

  16. Analysis of welding distortion using qualitative and semi-qualitative techniques

    … Each component must be fabricated to particular dimensional tolerances. Distortion caused by welding is a frequently occurring problem that makes it difficult to estimate the dimensions of the finished structures and thus increases the fabrication costs. Welding distortion is a poorly quantified …

    ubc Repository record for Analysis of welding distortion using qualitative and semi-qualitative techniques (opens in a new tab) Download PDF for Analysis of welding distortion using qualitative and semi-qualitative techniques (opens in a new tab)

  17. Study of temperature in the edge milling of carbon fiber-reinforced plastic (CFRP)/Ti6Al4V stack material for aerospace industry

    … makes achieving specified geometries and dimensional tolerances a real challenge. Therefore, this thesis studies the thermal effects on CFRP/Ti6Al4V in the process of edge milling. In particular, we study the tool-workpiece thermocouple method by using commercial thermocouples. …

    ets-quebec Download PDF for Study of temperature in the edge milling of carbon fiber-reinforced plastic (CFRP)/Ti6Al4V stack material for aerospace industry (opens in a new tab)

  18. THE EFFECT OF POST PROCESSING ON THE MECHANICAL PROPERTIES AND FRACTURE MECHANISMS OF ALSI10MG PRODUCED THROUGH SELECTIVE LASER MELTING

    … for the satellite industry, which has tight dimensional tolerances and as such, water quenching is not adequate. Currently, annealing for a stress relief treatment is the only post- processing measure that does not involve water quenching. This project studied a novel direct HIP approach, …

    mcmaster Repository record for THE EFFECT OF POST PROCESSING ON THE MECHANICAL PROPERTIES AND FRACTURE MECHANISMS OF ALSI10MG PRODUCED THROUGH SELECTIVE LASER MELTING (opens in a new tab)

  19. A compliant model for estimation and optimization of damping in vibrating structures

    … large structures which must maintain precise dimensional tolerances even during dynamic maneuvers. In order to attenuate disturbances in the many modes of vibration of such a structure, active and passive vibration control are proposed. The passive control is to be achieved by placing viscous …

    iastate Repository record for A compliant model for estimation and optimization of damping in vibrating structures (opens in a new tab)

Page 1 of 3