Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 29 for “"Direct Strength Method (DSM)"”.

  1. Análise da interação entre os modos de flambagem local e distorcional em perfis de aço formados a frio com seção rack sob compressão axial

    … paving the way for the application of the Direct Strength Method (DSM) design approach for columns with other cross-section shapes affected by LD interaction. Therefore, this research aims to investigate the interaction behavior between local and distortional buckling modes of cold-formed …

    brazil-uerj Repository record for Análise da interação entre os modos de flambagem local e distorcional em perfis de aço formados a frio com seção rack sob compressão axial (opens in a new tab)

  2. Análise numérica via MEF e dimensionamento pelo método da resistência direta de estacas-prancha metálicas de parede fina sob colapso local

    … using FEM for stability analysis and ultimate strength of cold formed steel sheet piles under local collapse, considering typical loads acting on structural elements of foundations, besides evaluating the performance of the current Design Strength Method (DSM) provisions to estimate the …

    brazil-uerj Repository record for Análise numérica via MEF e dimensionamento pelo método da resistência direta de estacas-prancha metálicas de parede fina sob colapso local (opens in a new tab)

  3. Otimização via algoritmos meta-heurísticos de perfis de aço U enrijecidos formados a frio submetidos à compressão axial

    … systems. This dissertation aims to provide a methodology that allows the development of lipped channel columns with maximum capacity for practical applications. The algorithms developed in this work match the geometric requirements suggested by NBR 14762, practical and fabrication restrictions …

    brazil-uerj Repository record for Otimização via algoritmos meta-heurísticos de perfis de aço U enrijecidos formados a frio submetidos à compressão axial (opens in a new tab)

  4. Dimensionamento via método da resistência direts de colunas em aço inoxidável de parede fina sob falha distorcional

    … for the design of these elements using Direct Strength Method (DSM). Initially, it describes the criteria’s adopted for the selection of the columns via GBT (Generalized Beam Theory), in which different types of support conditions (pinned-pinned and prevented-prevented) even as different …

    brazil-uerj Repository record for Dimensionamento via método da resistência direts de colunas em aço inoxidável de parede fina sob falha distorcional (opens in a new tab)

  5. Behavior and DSM design of cold-formed steel “S" type beams experiencing distortional failure

    … buckling and post-buckling behavior, ultimate strengthand Direct Strength Method (DSM) design predictions applied to cold formed steel beams with “S” type and lipped channels (plane and stiffened) sections experiencing distortional buckling. The analyzed beams (i) are single-span members, (ii) …

    brazil-uerj Repository record for Behavior and DSM design of cold-formed steel “S" type beams experiencing distortional failure (opens in a new tab)

  6. Design of High-Strength Polygonal Cold-Formed Steel Built-Up Sections Using the Direct Strength Method

    … particularly the development of high -strength low-alloy (HSLA) sheet with a minimum yield strength of 100 ksi (690 Mpa), have further expanded the use of cold-formed sections in lightweight and advanced structural applications, such as in the solar energy industry. Despite their …

    gatech Repository record for Design of High-Strength Polygonal Cold-Formed Steel Built-Up Sections Using the Direct Strength Method (opens in a new tab)

  7. Resistência de perfis "Z" formados a frio sob flexão não-uniforme e colapso distorcional

    … and post-buckling behavior, as well as the Direct Strength Method (DSM) design predictions, set out in Annex C of the Brazilian Standard NBR 14762: 2010 and AISI S100-16 Specification. Buckling modes and their ultimate strength and lengths of the bars are determined through eigenvalue …

    brazil-uerj Repository record for Resistência de perfis "Z" formados a frio sob flexão não-uniforme e colapso distorcional (opens in a new tab)

  8. Direct Strength Method for the Flexural Design of Through-Fastened Metal Building Roof and Wall Systems under Wind Uplift or Suction

    … The objective of this thesis is to introduce a Direct Strength Method (DSM) prediction approach for simple span purlins and girts with one flange through-fastened under uplift or suction loading. This prediction method is also applicable for the case when rigid board insulation is placed between …

    vt Repository record for Direct Strength Method for the Flexural Design of Through-Fastened Metal Building Roof and Wall Systems under Wind Uplift or Suction (opens in a new tab)

  9. Advancing Cold-Formed Steel Portal Frame Design: An In-Depth Study of Seamed Box Sections, Eaves Connections, and Column Base Details

    … Additionally, two design approaches based on the Direct Strength Method (DSM) were developed to determine flexural-torsional buckling moments, enhancing the accuracy of bending capacity calculations. 2. Eaves Joint of CFS Portal Frames: This study involves experimental and finite element analysis …

    auckland-ms Repository record for Advancing Cold-Formed Steel Portal Frame Design: An In-Depth Study of Seamed Box Sections, Eaves Connections, and Column Base Details (opens in a new tab)

  10. DSM-based prediction of distortional failure loads of cold-formed steel columns at elevated temperatures

    … to investigate the structural behavior, strength and Direct Strength Method (DSM) design of cold-formed steel columns failing in distortional modes at elevated temperatures. The numerical results, obtained by means of ANSYS shell finite element analyses (SFEA), concern columns with (i) …

    brazil-uerj Repository record for DSM-based prediction of distortional failure loads of cold-formed steel columns at elevated temperatures (opens in a new tab)

  11. Interação entre modos de flambagem de perfis de aço formados a frio: análise e método de dimensionamento estrutural

    … to the original plate, achieving a favorable strength-to-weight ratio. While these structures offer significant advantages, it's crucial to consider their elevated slenderness values. This can lead to the formation of thin-walled structures, which are prone to buckling modes, including local …

    brazil-uerj Repository record for Interação entre modos de flambagem de perfis de aço formados a frio: análise e método de dimensionamento estrutural (opens in a new tab)

  12. Resistência de colunas de aço formadas a frio com seção Ue exibindo interação global-global

    … Dinis et al. (2020) reported that the current Direct Strength Method (DSM) global design curve underestimates the failure loads of fixed-ended cold-formed steel channel columns affected by global-global interaction (flexural-torsional and flexural). This work extends the scope of the previous …

    brazil-uerj Repository record for Resistência de colunas de aço formadas a frio com seção Ue exibindo interação global-global (opens in a new tab)

  13. Validação numérico-experimental do colapso distorcional de colunas metálicas em perfil formado a frio

    … ( 2013) and the study the applicability of the Direct Strength Method ( DSM) – which is prescribed in the Brazilian standard ABNT NBR 14762:2010 and in the American standard AISI S100:2016 – in the ultimate strength estimation. The buckling modes and the correspondent ultimate strength values …

    brazil-uerj Repository record for Validação numérico-experimental do colapso distorcional de colunas metálicas em perfil formado a frio (opens in a new tab)

  14. Structural and thermal performance of cold-formed steel studs with slits

    … bridging, yet these openings can reduce axial strength. This thesis integrates structural and thermal assessments through validated non-linear elasto-plastic finite element analysis (FEA) and complementary heat-transfer modelling. Shell-element FEA models were developed and validated against …

    waikato-masters Repository record for Structural and thermal performance of cold-formed steel studs with slits (opens in a new tab) Download file for Structural and thermal performance of cold-formed steel studs with slits (opens in a new tab)

  15. Strengthening of cold-formed steel channels using different reinforcing options and innovative connections

    … conduits and water supply systems. The new Direct Strength Method (DSM) was developed to accurately predict their web crippling strength. In addition, this research explored key advancements in CFS systems, including built-up box sections and trusses equipped with advanced Howick Rivet …

    waikato-masters Repository record for Strengthening of cold-formed steel channels using different reinforcing options and innovative connections (opens in a new tab) Download file for Strengthening of cold-formed steel channels using different reinforcing options and innovative connections (opens in a new tab)

  16. Dimensionamento à falha distorcional via método da resistência direta de vigas de aço em perfil formado a frio sob flexão não-uniforme

    … by provided solid evidence that the current Direct Strength Method (DSM) beam distortional strength curve overestimates the ultimate strength of cold-formed steel simply supported beams, thus leading to unsafe designs — the beams analyzed were uniformly bent. Moreover, used the distortional …

    brazil-uerj Repository record for Dimensionamento à falha distorcional via método da resistência direta de vigas de aço em perfil formado a frio sob flexão não-uniforme (opens in a new tab)

  17. Experiments, Analysis, and Design of Built-Up Cold-Formed Steel Columns

    … fastener layouts on column buckling behavior and strength; (3) numerical modeling of the elastic buckling and collapse behavior of the tested columns; and (4) rational design approaches based on tested observations and state-of-the art numerical modeling capabilities. The tested columns ranged in …

    jhu Repository record for Experiments, Analysis, and Design of Built-Up Cold-Formed Steel Columns (opens in a new tab)

  18. Fire Performance of Cold-Formed Steel Walls

    … using the finite strip and finite element methods aims to provide a better understanding of the behavior of CFS members under fire. Numerical results are validated with experimental data, and used to judge the feasibility of current Direct Strength Method (DSM) column equations for fire …

    jhu Repository record for Fire Performance of Cold-Formed Steel Walls (opens in a new tab)

  19. Strength and Behavior of Advanced High Strength Steel Structural Components

    Advanced High Strength Steel (AHSS) is the next generation of steel for cold-formed steel (CFS) construction. With the superior strength of AHSS, the design space of CFS structures can be greatly extended, leading to improved efficiency and less steel consumption in construction. A research …

    jhu Repository record for Strength and Behavior of Advanced High Strength Steel Structural Components (opens in a new tab)

  20. Behaviour and Design of Cold-Formed Steel Members Subjected to Combined Axial Compressive Load and Bending Moment

    … study first evaluated the reliability of the Direct Strength Method (DSM) as specified in the American Iron and Steel Institute (AISI-S100) and Australian/New Zealand Standard (AS/NZS-4600), as well as the design methods proposed in the literature for estimating the load-carrying capacity of …

    auckland-ms Repository record for Behaviour and Design of Cold-Formed Steel Members Subjected to Combined Axial Compressive Load and Bending Moment (opens in a new tab)

Page 1 of 2