Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 16 of 16 for “"Direct chill casting"”.
-
Numerical analysis of direct-chill casting of aluminum ingot
Direct chill (DC) semi-continuous casting is the most efficient way to produce large aluminum ingots. This process consists of three main stages; transient stage, steady-state stage, and post-drop stage. During transient stage, the ingot is subjected to rapid cooling rate and thus resulted in the …
-
Secondary cooling in the direct-chill casting of light metals
The Direct-Chill (DC) casting process is used in the non-ferrous metals industry to produce ingots, blooms and cylindrical billets. During DC casting, primary cooling in the mould is followed by secondary cooling, in which the cast product surface is directly cooled by water jets. The formation of …
-
Direct Chill Casting of Aluminum Alloys: Experimental Methods and Design
… which is a new variant of the traditional direct chill (DC) casting process that allows co-casting of multi-layered composite aluminum alloy ingots. One of the first steps in this development program is to create a mathematical model of conventional DC casting and validate it through …
-
Three dimensional heat flow in the direct chill casting of non-ferrous metals
… to study heat flow and solidification in the Direct Chill casting of non-ferrous metals with rectangular as well as irregular cross-sections. The model which is based on an alternating direction, implicit finite-difference numerical method is capable of simulating heat flow both in the steady …
-
Thermal stress prediction for direct-chill casting of a high strength aluminum alloy.
Direct chill (D.C.) casting is one of the most important semi-continuous methods for the production of high strength aluminum alloys. The enormous unevenly cooling of ingots during the casting process can cause significant thermally induced stresses, which may result in solidification cracking. The …
-
A coupled thermal - fluid flow model of the horizontal direct chill casting process for T-ingot
In recent years, Horizontal Direct Chill (HDC) casting has gained popularity as a method for processing primary aluminum. In an attempt to further develop the knowledge and understanding necessary to enhance HDC casting capabilities in industry and improve its economic viability, a coupled …
-
A STUDY ON HOT TEARING IN DIRECT CHILL CASTING OF ALUMINUM ALLOYS USING A MULTI-SCALE APPROACH
… is one of the most severe defects encountered in direct chill (DC) casting of aluminum alloys and is intimately linked with the constitutive behavior of the alloy in the semi-solid region. The experimental studies in this field are limited due to the high temperature at which hot tears form and …
-
Heat transfer characterization of secondary cooling in the horizontal direct chill casting process for aluminum alloy re-melt ingot
Horizontal direct chill (HDC) casting is a continuous process used to produce extrusion billet and re-melt aluminum ingot. As in vertical DC casting, secondary cooling, where water directly impinges on the cast surface, is an important process that can affect cast quality and production rates. …
-
Pseudo-plastically coupled wrinkling phenomena to explain "vertical fold" surface defects in direct chill casting of Al-Mg4.5-Mn0.3 ingots
Includes bibliographical references (pages 241-254).
-
Mathematical modeling of the evolution of thermal field during start-up phase of the direct chill casting process for AA5182 sheet ingots
… cooling conditions at the start-up phase of the Direct Chill (DC) casting process for aluminum sheet ingots is difficult, and is critical from the standpoint of defect formation. Firstly, boiling water heat transfer governs the secondary cooling experienced by the ingot surfaces as they emerge …
-
Prvková analýza hořčíkových slitin pomocí spektrometrie laserem buzeného plazmatu (LIBS)
… 1,6 mm a ZE41 o hrúbke 2 mm vyrobené metódou Direct Chill casting. V práci bol popísaný spôsob kvalitatívneho a kvantitatívneho vyhodnocovania spektier pomocou LIBS. Z kvalitatívnej analýzy ZE41 bola potvrdená prítomnosť La, Ce, Nd a Pr a v ZE10 sa podarilo potvrdiť prítomnosť La a Ce. Tieto …
-
Inclusions and hydrogen and their effects on the quality of direct chill cast and flat rolled aluminium alloys for aerospace applications
Flat rolled Al alloys manufactured using the Direct Chill casting process are used in safety critical applications and therefore need to be of the highest possible quality. Liquid metal is cleaned using a mixture of inert Ar and reactive Cl gases before casting. The first section of this work …
-
Solidification behaviour of magnesium alloys
… particles, the role of solute, and the role of casting conditions. First of all, the study suggested that MgO particles can act as nuclei in magnesium alloys by measuring and analyzing the differences in cooling curves with various amount of endogenous MgO particles. The differences indicated …
-
Influence of ultrasonic cavitation treatment on fragmentation and de-agglomeration of primary intermetallics and oxides formed in Al alloys
… system by implementing UST in a conventional direct-chill casting setup. The casting trials demonstrated the positive impact of cavitation melt treatment on the grain refinement characteristics of end cast billet/ingots. The promising results from both fundamental and real-scale experiments …
-
Modeling transport phenomena and uncertainty quantification in solidification processes
Direct chill (DC) casting is the primary processing route for wrought aluminum alloys. This semicontinuous process consists of primary cooling as the metal is pulled through a water cooled mold followed by secondary cooling with a water jet spray and free falling water. To gain insight into this …
-
Numerical investigation of horizontal twin-roll casting of the magnesium alloy AZ31
The horizontal twin-roll casting (TRC) process is an energy saving and cost-efficient method for producing near-net-shape sheets of castable metals for light-weight production. In order to investigate the TRC process numerically, a code is generated in OpenFOAM and the commercial software STAR-CCM+ …