Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 31 for “"Direct conversion receiver"”.
-
Radio frequency front-end circuits for W-CDMA direct conversion receiver
… the development of RF front-end circuits for the direct conversion receiver. The receiver is targetted for W-CDMA mobile communication system, hence the technical requirements are analyzed and the design goals for the RF front-end circuits are derived. In the second part of the thesis, the …
-
A CMOS DB-linear VGA with DC offset cancellation for direct-conversion receiver
… a novelI/Q tuning loop to remove DC offset for direct-conversion receiver has beendesigned in a 0.35I?m CMOS technology.The dB-linear VGA comprises a linear VGA and a novel pseudo-exponentialvoltage circuit. Different VGA and pseudo-exponential circuit have been studied.The proposed circuit is a …
-
A highly linear and low flicker-noise CMOS direct conversion receiver front-end for multiband applications
… of a highly linear and low flicker-noise receiver front-end based on the direct conversion architecture for multiband applications in a CMOS technology. The dissertation consists of two parts: One, implementation of a highly linear RF receiver front-end and, two, implementation of a low …
-
Low-noise amplifiers for integrated multi-mode direct-conversion receivers
… and the location of the terminal. The choice of receiver architecture affects the performance, size, and cost of the receiver. The superheterodyne receiver has hitherto been the dominant radio architecture, because of its good sensitivity and selectivity. However, superheterodyne receivers …
-
Broadband RF Front-End Design for Multi-Standard Receiver with High-Linearity and Low-Noise Techniques
… blocks which justifies the adoption of broadband receiver front-ends in modern and future communication systems. The broadband receiver front-end significantly reduces cost, area, pins, and power, and can process several signal channels simultaneously. This research is mainly focused on the …
-
UAV digital tracking array design, development and testing
… and development of an integrated array and receiver processor that utilizes advanced techniques of Robust Symmetric Numeric System (RSNS) and monopulse Digital Beamforming (DBF) to accurately track a UAV using commercial-off-the-shelf (COTS) equipment. This was based on previous work done …
-
A Millimeter-Wave Coexistent RFIC Receiver Architecture in 0.18-µm SiGe BiCMOS for Radar and Communication Systems
… millimeter-wave coexistent current mode direct conversion receiver for short-range, high-resolution radar and high data rate communication systems. A new class of broadband low power consumption active balun-LNA consisting of two common emitters amplifiers mutually coupled thru an AC …
-
Calibração cega de receptores cinco-portas baseada em separação cega de fontes
… design of new architectures for multi-standard receivers or software defined radio (SDR) . The key challenge in designing architecture of the software defined radio is the implementation of a wide-band receiver, reconfigurable, low cost, low power consumption, higher level of integration and …
-
An adaptive algorithm for direct conversion receivers: Architecture and performance analysis
… remove in-phase and quadrature (I/Q) mismatch, direct current (DC) offsets, flicker noise and inter-symbol interference (ISI) simultaneously in a direct conversion receiver (DCR). I/Q mismatch is cancelled by a real valued adaptive mismatch canceller and DC offsets are removed with one complex …
-
High Performance LNAs and Mixers for Direct Conversion Receivers in BiCMOS and CMOS Technologies
… chipset generation. If the chipset also supports receiver diversity two low noise amplifiers (LNAs) are required for each frequency band. This is however associated with an increase of off-chip components, i.e. matching components for the LNA inputs, as well as complex routing of the RF input …
-
Systemanalyse und Entwicklung Six-Port basierter Funkempfängerarchitekturen unter Berücksichtigung analoger Störeffekte
… enormous interest to develop appropriate analog receiver front-ends. In this respect, one promising candidate group is the Six-Port-based direct conversion receiver. The presented work focuses on the investigation of Six-Port-based mobile receiver front-ends with their specific systematical …
-
Design and characterization of downconversion mixers and the on-chip calibration techniques for monolithic direct conversion radio receivers
… in this thesis is focused on the design of downconversion mixers and direct conversion radio receivers for UTRA/FDD WCDMA and GSM standards. The main interest of the work is in the 1-3 GHz frequency range and in the Silicon and Silicon-Germanium BiCMOS technologies. The RF front-end, and …
-
Design Of A 20MHz Transimpedance Amplifier With Embedded Low-pass Filter For A Direct Conversion Wireless Receiver
… of the number of radio frequency (RF) front-end receivers required to cater to the various standards/bands within a single device to reduce cost, size and power consumption. The current trend is to use broadband/multi-standard or reconfigurable RF front-ends to cater to two or three standards at …
-
System-level design and RF front-end implementation for a 3-10ghz multiband-ofdm ultrawideband receiver and built-in testing techniques for analog and rf integrated circuits
… a) Design of a 3-10GHz UltraWideBand (UWB) Receiver and b) Built-In Testing Techniques (BIT) for Analog and RF circuits. The MultiBand OFDM (MB-OFDM) proposal for UWB communications has received significant attention for the implementation of very high data rate (up to 480Mb/s) wireless …
-
Auxiliary-Path-Assisted Digital Linearization of Wideband Wireless Receivers
… application fields can be achieved by employing receiver architectures such as the wideband direct conversion receiver topology. This is advantageous from the view point of cost, power consumption and size. However, many challenges exist, of particular importance is nonlinear distortion arising …
-
Analog baseband circuits for WCDMA direct-conversion receivers
… circuits for low-power single-chip WCDMA direct-conversion receivers. The reference radio system throughout the thesis is UTRA/FDD. The analog baseband circuit consists of two similar channels, which contain analog channel-select filters, programmable-gain amplifiers, and circuits that …
-
Power and area optimization techniques for ultra-wideband millimeter-wave CMOS transceivers
… first order approximation, power consumption is directly proportional to system bandwidth. Therefore, as the bandwidth requirements of systems increase, the challenge with on-chip power consumption will become increasingly difficult to solve. In this dissertation, techniques for optimizing the …
-
Radio frequency circuits for wireless receiver front-ends
… for a successful wireless product. The receiver??s front-end circuits play an important role in faithfully recovering the information transmitted through the wireless channel. Bluetooth is a short-range cable replacement wireless technology. A Bluetooth receiver architecture was proposed …
-
A CMOS Fractional Frequency Synthesizer for a Fully Integrated S-Band Extravehicular Activity (EVA) Radio Transceiver
… The transceiver consists of a dual up-conversion transmitter (TX) and a direct conversion receiver (RX) at 2.4GHz. It supports 10 channels spaced at 6MHz for both video and voice communications, covering the frequency band from 2.4GHz to 2.454GHz. Therefore in the TX mode, the …
-
Design, analysis, and optimization of radio frequency front-ends for integrated wireless receivers
… of RF front-ends for wireless zero- and low-IF receivers. The main interest of the work is in the 1-4 GHz range and in CMOS and BiCMOS technologies. Often, the RF front-end limits the performance of the entire direct conversion or low-IF radio receiver. The emphasis in this work is on the …
Page 1 of 2