Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 30 for “"Direct printing"”.

  1. Direct printing of single-crystal silicon by microscale nanoparticle printing and confined laser melting and crystallization

    … of Si nanoparticles was conducted. A non-vacuum printing process, aerosol printing, was adopted in this dissertation, which enabled us to prepare Si film and lines with a cost-effective manner. Followed with pressing, the Si nanoparticles were densified and planarized. Then, the nanoparticles …

    must-thes Repository record for Direct printing of single-crystal silicon by microscale nanoparticle printing and confined laser melting and crystallization (opens in a new tab)

  2. ULTRA-FAST LASER ENHANCED PRINTING OF NANOMATERIAL FOR HIGH QUALITY TRANSPARENT ELECTRODE

    Direct printing of nanomaterials, which integrate nanomaterials into a film via low cost mean, is designed to fabricate transparent conductive electrode (TCE) film. Following laser processing is utilized as the post treatment to enhance the film performance. The laser processing is proposed in …

    purdue-thes Repository record for ULTRA-FAST LASER ENHANCED PRINTING OF NANOMATERIAL FOR HIGH QUALITY TRANSPARENT ELECTRODE (opens in a new tab)

  3. StarJet printheads for printing molten solder jets at 320 °C and molten aluminum alloy droplets at 950 °C

    … on the StarJet technology which is a means of directly printing molten metal. StarJet printheads can be used for printing of metal microdroplets in drop-on-demand mode, or continuous molten metal jets. For<br>the first time, the technology is used for printing of functional metallizations based …

    freiburg-diss Repository record for StarJet printheads for printing molten solder jets at 320 °C and molten aluminum alloy droplets at 950 °C (opens in a new tab)

  4. Infrared Drying Parameter Optimization

    … years, much research has been done to explore direct printing methods, such as screen and inkjet printing, as alternatives to the traditional lithographic process. The primary motivation is reduction of the material costs associated with producing common electronic devices. Much of this …

    rit Repository record for Infrared Drying Parameter Optimization (opens in a new tab)

  5. 4D Printing Dielectric Elastomer Actuator Based Soft Robots

    4D printing is an emerging technology that prints 3D structural smart materials that can respond to external stimuli and change shape over time. 4D printing represents a major manufacturing paradigm shift from single-function static structures to dynamic structures with highly integrated …

    arkansas Repository record for 4D Printing Dielectric Elastomer Actuator Based Soft Robots (opens in a new tab)

  6. Fully printed flexible and stretchable electronics

    … transistors and photodetectors fabricated by a direct printing process. By adopting the novel serpentine configuration with conventional non-stretchable materials silver nanoparticles, the fully printed stretchable devices are successfully fabricated on elastomeric substrate with the …

    msu Repository record for Fully printed flexible and stretchable electronics (opens in a new tab)

  7. The industrial development of transparent conducting coatings by a Sol-Gel route

    … Sol-gel technology was used to facilitate direct printing of patterned layers. Precursors were selected and a processing route developed. Values for glass transition and crystallization temperature were found to be considerably lower than the accepted bulk value. Dip-coated parts yielded …

    birmingham Download PDF for The industrial development of transparent conducting coatings by a Sol-Gel route (opens in a new tab)

  8. DEVELOPMENT OF INKS FOR 3D PRINTING OF BLOCK COPOLYMER SELF-ASSEMBLY DIRECTED HIERARCHICALLY STRUCTURED OXIDES

    The 3D printing technique of Direct Ink Writing (DIW) allows the fabrication of functional materials of various form factors and geometries. Combining this technique with inks made from block copolymer (BCP) self-assembly directed inorganic precursors provides access to hierarchically ordered …

    cornell Repository record for DEVELOPMENT OF INKS FOR 3D PRINTING OF BLOCK COPOLYMER SELF-ASSEMBLY DIRECTED HIERARCHICALLY STRUCTURED OXIDES (opens in a new tab)

  9. Solution Synthesis and Additive Manufacturing of Bismuth Telluride Nanoflakes for Flexible Energy Harvesting

    … and recently, low gravity conditions. Plasma jet printing (PJP) is a new AM modality in which material is deposited via a gravity- independent plasma. This thesis demonstrates solution processing, ink synthesis, and PJP of bismuth telluride (Bi2Te3) nanoflakes for low temperature energy …

    boise Repository record for Solution Synthesis and Additive Manufacturing of Bismuth Telluride Nanoflakes for Flexible Energy Harvesting (opens in a new tab)

  10. RS170 image processing interface

    … color image. The hardware design will allow direct printing from a RGB separate channel RSl 70 video source to a Tektronix 4693DX Color Printer through a Centronics port. It will also allow the red, blue and green video channels to pass through a sobel filter, with the resulting image being …

    ucf Repository record for RS170 image processing interface (opens in a new tab)

  11. Femtosecond Laser Assisted Three-Dimensional Printing of Metal at Micro/nanoscale

    … micro and nanoscale. Currently, light-based 3D printing with sub-micron features is mainly developed based on photosensitive polymers or inorganic-polymer composite materials. To eliminate polymer/organic additives, a strategy for direct 3D assembly and printing of metallic nanocrystals without …

    tamu Repository record for Femtosecond Laser Assisted Three-Dimensional Printing of Metal at Micro/nanoscale (opens in a new tab)

  12. Developing Novel 3D Antennas Using Advanced Additive Manufacturing Technology

    … a good candidate to overcome the limitations of direct printing on 3D surfaces that is the most popular method to fabricate conductive parts of the antennas. This thesis also studies, for the first time, the fabrication of antennas with 3D printed conductive parts which can contribute to the new …

    nodak Repository record for Developing Novel 3D Antennas Using Advanced Additive Manufacturing Technology (opens in a new tab)

  13. Hybrid Additive Manufacturing of Functional Ceramics and Glasses

    … structures with high precision. Among the 3D printing methods direct ink writing (DIW) has emerged as a highly versatile and efficient approach for the manufacturing of ceramics. In this dissertation DIW is utilized to fabricate ceramic materials as monolithic solids and 3D network structures. …

    cau-kiel Repository record for Hybrid Additive Manufacturing of Functional Ceramics and Glasses (opens in a new tab)

  14. The Effect of Crowding on the Accuracy of 3D Printed Aligners

    … the accuracy of aligners manufactured using 3D printing or conventional vacuum-forming techniques. 3D printed aligners showed less deviation than the vacuum-formed samples (0.1139mm vs 0.1330mm; p-value=0.0007). There was also a statistically significant difference in the variance between the …

    vcu Repository record for The Effect of Crowding on the Accuracy of 3D Printed Aligners (opens in a new tab)

  15. 3D Printed Functional Materials and Devices and Applications in AI-powered 3D Printing on Moving Freeform Surfaces

    The capability of 3D printing a diverse palette of functional inks will enable the mass democratization of manufactured patient-specific wearable devices and smart biomedical implants for applications such as health monitoring and regenerative biomedicines. These personalized wearables could be …

    umn Repository record for 3D Printed Functional Materials and Devices and Applications in AI-powered 3D Printing on Moving Freeform Surfaces (opens in a new tab)

  16. FUNCTIONAL PARTICLE GENERATION BY AEROSOL-ASSISTED PROCESSES

    … and two-dimensional structures fabricated by direct printing inks containing Cu-Sn powders display low resistivity. They all suggest that Cu-Sn binary particles produced by spray pyrolysis are promising materials in the inks in printed electronics and in the conductive pastes in solar cell …

    maryland Repository record for FUNCTIONAL PARTICLE GENERATION BY AEROSOL-ASSISTED PROCESSES (opens in a new tab)

  17. Enhanced Piezoelectric Performance of Printed PZT Films on Low Temperature Substrates

    … exploration is accordingly necessary to realize direct fabrication of PZT films on low melting point substrates without affecting the piezoelectric performance. In order to lower the PZT film sintering temperature, in this work, the effect of the powder size and sintering aid on the sintering …

    rit Repository record for Enhanced Piezoelectric Performance of Printed PZT Films on Low Temperature Substrates (opens in a new tab)

  18. An Historical and Practical Investigation of Photogravure

    … intaglio and photography, is a manual method of printing photographic images in ink from etched copper plates. A print made by this method is a hand-crafted work of art, equal or superior to a silver-gelatin print. Photogravure offers the advantage of permanence through its use of fine ink and …

    unm Repository record for An Historical and Practical Investigation of Photogravure (opens in a new tab)

  19. Printed Charge Storage Capacitor

    … is to introduce the fundamental background of printing technologies, electrical capacitors and printable materials. Among all the printing technologies, direct writing family is the most advantageous in the small-scale and fast production of printed electronics due to the properties of …

    qucosa-diss

Page 1 of 2