Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 74 for “"Direct shear test"”.
-
Determination of soil properties for sandy soils and road base at Riverside Campus using laboratory testing and numerical simulation
… extensively used as a backfill for full-scale testing at Riverside Campus at Texas A&M University. The three soils were collected at the Riverside Campus and the testing schedule included grain size analysis, hydrometer test, specific gravity, maximum dry density, Atterberg limit, stiffness, …
-
Comparison of direct shear and triaxial tests for measurement of shear strength of sand
To ascertain the shear strength parameters of soils for engineering purposes is fundamental to soil mechanics and basic for designing earth-bearing and earth-retaining structures. Direct shear and triaxial tests are the most popular laboratory methods to determine these parameters. The direct shear …
-
Testing and modeling of unsaturated interfaces.
A conventional fully automated direct shear test device was modified to achieve the objectives of this study. The newly developed device, called the Unsaturated Interface Direct Shear Apparatus (UIDSA), was equipped for applying and maintaining suction as well as net normal stress. The UIDSA can be …
-
Three Dimensional Numerical Modeling of Excavation in Rock With Dilatant Joints
… is modeled using the plastic work done in shear. A dimensionless product of plastic work, rock strength, and wavelength of irregularities has been developed which fits the direct shear test results. An approach to scaling shear strength and shear displacement from laboratory to in the field …
-
Experimental quantification and DEM simulation of micro-macro behaviors of granular materials using x-ray tomography imaging
… The digitally represented microstructure can be directly employed for numerical simulation setup. A compression test and a direct shear test on coarse aggregates were conducted and analyzed using this method. The experimental measurements were applied for the evaluation of DEM simulations. The …
-
Shearing rate effects on drained shear strength of flue gas desulfurization (FGD) byproduct
Deformation rates used in direct shear test where obtained using two different approaches. The first consisted of calculating time of failure from consolidation data and other from measured hydraulic conductivity. The deformation rate from the later method exceeded the rates by former method. Thus …
-
Estimating liquefaction potential of sands using the piezovane
Laboratory test results are presented indicating feasibility of estimating liquefaction potential of saturated cohesionless soil using the piezovane, a shear vane incorporating pore pressure measurement. Utilizing a calibration chamber, piezovane shear tests are conducted on medium-fine subrounded …
-
Simulation of realistic granular agricultural material behavior using a physics-based game engine
… and property configuration of simulating direct shear and triaxial test for agricultural materials using physics engine. The first chapter describes a computational approach for simulating direct shear test results for corn kernels using a physics engine. Existing discrete element method …
-
Enhancement of Shaft Capacity of Cast-in-Place Piles Using a Hook System
… of passive inclusion on pile-soil interface shear strength behaviour, employing a modified direct shear test apparatus. The interface strength obtained for pile-soil specimens was found to significantly increase when passive inclusions were implemented. Residual friction angle for …
-
Evolution of Pile Shaft Capacity over Time in Soft Clays (Case Study: Leda Clay)
… pile-soil interface over time using a modified direct shear test at two loading rates of slow and fast. The second phase involved a series of pile load testing was performed on steel and concrete piles driven into Leda clay in a test site. The piles were tested immediately after driving to …
-
Improvement of Laboratory Protocols for Discontinuity Geomechanical Characterization and Investigation of the Effect of Saturation on Granite Strength
… in granite in compression, tension, and confined shear. In addition to the investigation of rock-water interactions, this work also presents the development of a new direct shear sample preparation procedure as well as a technique for normal loading and direct shear test data processing and …
-
Comportamento geotécnico de misturas de solo e resíduos de perfuração onshore
… and X-ray fluorescence (XRF) and by laboratory tests traditionally used in soil mechanics, as particle-size analysis of soils, determination of liquid and plasticity indexes and compaction test. After soil and residue characterization, soil-residue mixtures were studied, using dosages of 2,5%, …
-
Quantifying Workability, Compactability, and Cohesion Gain of Asphalt Emulsion Cold In-Place Recycling
… properties. Chapter 4 evaluates different test methods and equipment commonly available in asphalt laboratories for ability to quantify workability, compactability, and cohesion gain of asphalt emulsion CIR by measuring differences in performance due to changes in laboratory curing …
-
Methods to develop composite action in non-composite bridge floor systems: part I
… investigates the viability of post-installing shear connectors. Of the fifteen connectors investigated, the static load-slip characteristics of twelve post-installed shear connectors was assessed, resulting in the recommendation of seven connectors for further testing. A static single-connector …
-
An evaluation of the triaxial compression test for the determination of the shear strength of soils
… at all points within the soil mass, the shearing, stresses caused by these loads and the shearing resistance of the soil, The two most generally accepted tests for evaluating the shearing resistance of soils area 1. the direct shear test which measures the shearing resistance directly and …
-
Development and Application Of Discrete Element Models For Granular Materials - From Rigid Spheres To Complex-Shaped Flexible Particles With Breakage
… including particle size, specific gravity, and shear strength. Results from characterization tests are used in the development and calibration of the DEM model. A direct shear test model is developed in DEM. In this study, the LHS-1 particles are modeled as rigid, spherical particles in DEM. To …
-
A methodology of calibrating flexible fibers in the discrete element method for simulating wheat straw shear
… procedure utilized three different tests, the cantilever beam test, the 3-point-bending</p> <p>test, and the uniaxial compression test. The calibration was validated with the direct shear test.</p> <p>The cantilever beam test and 3-point-bending test were utilized together to …
-
Evaluation of concrete bridge deck overlays
… and substrate age using a recently developed direct shear test apparatus.;Results show that except for bonding slurry, all the parameters had strong influence on shear bond strength. The results of this study will serve the purpose of screening and selection of overlays from a large number of …
-
Modelagem numérica de estruturas de contenção atirantadas em areia
… horizontal displacements, horizontal stresses, shear forces and bending moments in the structure during the construction process. Emphasis was placed on the evaluation of wall embedment, tie-back horizontal spacing, wall thickness, and free anchor length on wall behavior. A representative soil …
-
Behavior characterization and development of LRFD resistance factors for axially-loaded steel piles in bridge foundations
… Consequently, significant efforts have been directed by Departments of Transportation (DOTs) in different states towards the development and implementation of the LRFD approach for the design of bridge's deep foundations. The research presented in this thesis is aimed at establishing the LRFD …
Page 1 of 4