Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 11 of 11 for “"Direct write printing"”.
-
Modeling and control of an easy-to-use direct write printing system for fabrication of bone scaffolds
This Thesis was approved for publication on 2017-07-21 at 08:17.
-
Fabrication of Micro Pillar Arrays Via Aerosol Jet Printing
Direct write printing is one of the evolving technologies that can be used to fabricate 3D structures such as ceramic micro-pillars. Direct write printing processes can print high resolution structures in the micron or sub-micron range. These structures find their applications in 3D Micro-Electro …
-
hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write
3D printing is an additive manufacturing technique capable of creating highly customizable and uniquely-shaped structures that are difficult or completely impossible to produce using conventional methods, such as injection molding. Stereolithography and UV-assisted direct write printing are two 3D …
-
Direct write printed flexible electronic devices on fabrics
This thesis describes direct write printing methods to achieve flexible electronic devices on fabrics by investigating, low temperature process; and functional conductor, insulator and semiconductor inks. The objective is to print flexible electronic devices onto fabrics solely by inkjet printing …
-
Pulsed Photonic Curing of Conformal Printed Electronics
… bearing parts of electro-mechanical products. Direct-write printing processes like inkjet printing and aerosol jet printing can be used to print conductive inks on conformal surfaces of mechanical components. Advanced curing/sintering processes such as pulsed photonic curing can be used to …
-
Run-time Ink Stability in Pneumatic Aerosol Jet Printing Using a Split Stream Solvent Add Back System
Aerosol Jet printing is a non-contact process capable of printing nano-ink patterns on conformal and flexible surfaces. Aqueous or solvent nano-inks are pneumatically atomized by the flow of nitrogen gas. The flow of atomizing gas into and out of the cup leads to evaporation and removal of volatile …
-
Plasmon-mediated patterning of nanoparticles and biomolecules for functional nano-devices
… NP resolution and introduce laser-induced bubble printing to achieve large-area patterning. In addition, we also demonstrate simultaneous synthesis and structuring of nanoparticles and nanoalloys using a laser-mediated micro-bubble reactor. We demonstrate immobilization of multiple materials …
-
Iterative learning control of direct write additive manufacturing using online process monitoring
Submission original under an indefinite embargo labeled 'Open Access'. The submission was exported from vireo on 2023-09-01 without embargo terms
-
Carbon-based Inks and Printing Processes for Environmentally Friendly Sensors and Transistors
… applications. Additive manufacturing, notably printing, could be a powerful tool for fabricating robust flexible electronics for the IoT through the use of energy-efficient processes and recyclable or biodegradable materials. The work outlined in this dissertation presents contributions to the …
-
Printed Low-dimensional Materials for Thin-film Electronic and Optoelectronic Devices
… fabrication techniques, such as aerosol jet printing, and its potential as the contact material for printed carbon nanotube transistors. Ti3C2Tx MXenes have garnered significant attention for electronics applications due to their facile synthesis, tunable properties, and exceptional optical …
-
Addressing Scalability, Stability, and Sensitivity in Nanomaterial-based Electronic Biosensors
… with diverse fabrication approaches such as direct-write printing, which enables rapid and low-cost fabrication of electronics. However, while CNT-based BioFETs have the power to transform the medical landscape by providing early and POC disease detection, they face several key challenges …