Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 119 for “"Directional solidification"”.
-
Directional solidification of quaternary eutectics
… major factor in the large amount of work done on directional solidification in the past twenty years. The periodic structures obtained from directionally solidified eutectics show considerable potential for useful applications.</p><p>A substantial amount of theoretical and experimental work has …
-
Dendrite sidebranches in directional solidification
… mechanisms have been found in dendrites grown by directional solidification. Image analysis of experimental observations confirms these limit cycles are formed between the radius and the first instability that develops into a sidebranch. Experiments at all gradients are characterized based on the …
-
Directional solidification studies in Ni-Al alloys
… compositions was evaluated using quenched directional solidification experiments, that preserve the microstructures formed at the solidification front, and using diffusion couple experiments. These experiments show that the eutectic forms between the [beta] and [gamma][superscript]' phases, …
-
Directional solidification studies of Pb-Bi peritectic alloys
<p>Directional solidification experiments have been carried out in the Pb-Bi peritectic alloys to study the (alpha) (--->) (beta) phase transition, primary spacing and band structure formation. The (alpha) to (beta) phase transition has been shown to occur at low growth rates as well as at high …
-
Stability of a eutectic interface during directional solidification
<p>Directional solidification of eutectic alloys shows different types of eutectic morphologies. These include lamellar, rod, oscillating and tilting modes. The growth of these morphologies occurs with a macroscopically planar interface. However, under certain conditions, the planar eutectic front …
-
Directional solidification of Al-4.0 wt. pct. Cu alloys
Directional solidification is a widely used method of advanced materials processing. Metallic alloys, semiconductor or superconductor materials with unique mechanical, electrical, chemical, and/or magnetic properties can be produced by precisely controlling the processing variables. The properties …
-
Directional solidification of Pb-Sb alloy assisted by pressure pulses
Directional solidification processes assisted with pressure pulses were performed with the goal of producing a novel process capable of introducing changes in dendritic microstructure morphologies. The alloy used in these experiments was a Pb-7wt% Sb, with a liquidus temperature of approximately …
-
Directional Solidification, Microstructures and Mechanical Properties of Cr-Cr3Si Eutectic Alloys
… of materials is in-situ composites produced by directional solidification of intermetallic eutectics. In this study, the Cr-Cr<sub>3</sub>Si eutectic system is selected as a model system to investigate composites by directional solidification, where the strong, but brittle Cr<sub>3</sub>Si is …
-
Transport processes in directional solidification and their effects on microstructure development
… processes. Direct numerical simulation of the solidification process is carried out that takes into account the unsteady thermo-solutal convection in the vertical Bridgman crystal growth system, and accurately models the thermal interaction between the furnace and the ampoule by appropriately …
-
Fabrication of hierarchical cell carrier matrices for tissue regeneration by directional solidification
… to validate the hypothesis. Therefore, a new solidification based platform procedure was developed. This process comprises the directional solidification of multiple flowable precursors that are “cryostructured” to prepare a controlled anisotropic pore structure. Porous scaffolds are attained …
-
The effect of reflective baffles on the thermal gradient in directional solidification
Analysis of the heat transfer in the DS furnace allowed the development of a numerical model to calculate radiation and conduction in the furnace for the purpose of investigating the use of low emissivity, reflective baffles in place of traditional graphite foil material to provide a more effective …
-
A novel cfd-based approach for optimisation of the directional solidification process
The directional solidification process is used to produce single crystal turbine blades for modern aero engines. The spacing of primary dendrites (PDAS) within the microstructure are an indication of the thermal gradient attained during solidification; process optimisation is being driven by the …
-
On the length-scale and location of channel nucleation in directional solidification
This work provides evidence that channels in directionally solidified hypoeutectic Pb-Sn alloys nucleate at the dendrite tips. Using a finite-element simulator, distinctive 'convective signatures' are shown to exist for convectively unstable cases, where the instability of a system is shown to be …
-
Numerical simulation of directional solidification of binary alloys with high thermal gradients
Directional Solidification (DS) processing of metals and alloys results in castings with uniformly aligned microstructure with enhanced material properties and orderly grain boundaries running in one direction. Unfortunately, during DS density gradients caused by temperature and/or composition …
Page 1 of 6