Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 60 for “"Discontinuous Conduction Mode"”.

  1. Analysis of boost converter in continuous conduction mode and discontinuous conduction mode

    … discusses a boost converter using continuous conduction mode and discontinuous conduction mode. The first part of the thesis analyzes a boost converter using continuous conduction mode with voltage mode control. A switch network which eases the analysis of the boost converter is modeled. …

    uiuc Repository record for Analysis of boost converter in continuous conduction mode and discontinuous conduction mode (opens in a new tab)

  2. Analysis and Design of Discontinuous Conduction Mode AC-DC Power Factor Correction Converters

    … proposes and studies several new active switched-mode AC-DC converters (isolated and non-isolated) strictly satisfying the enhanced requirements of the aircraft application. The vital constituent in active AC-DC power conversion is the power factor correction (PFC). Understanding the certain …

    concordia Download PDF for Analysis and Design of Discontinuous Conduction Mode AC-DC Power Factor Correction Converters (opens in a new tab)

  3. Low harmonic content three-phase-to-DC-conversion using AC-side switches and discontinuous conduction mode

    … a switching cycle, the operation is called Discontinuous or Continuous Conduction Mode. The definition comes from the shape of the inductor current, whether or not it reaches zero every switching cycle. The present work brings a contribution to the knowledge about three-phase Power Factor …

    ubc Repository record for Low harmonic content three-phase-to-DC-conversion using AC-side switches and discontinuous conduction mode (opens in a new tab) Download PDF for Low harmonic content three-phase-to-DC-conversion using AC-side switches and discontinuous conduction mode (opens in a new tab)

  4. Application of Integrated Magnetics and Discontinuous Conduction Mode to Multi-port DC-DC Power Conversion for integrating PV panels with storage

    … is achieved by means of a combined Continuous Conduction Mode (CCM)-Discontinuous Conduction Mode (DCM) operation, but without sacrificing the ripple-free nature of currents on two of the ports. The non-isolated version of this converter, meant for modular use in a microconverter architecture, …

    umn Repository record for Application of Integrated Magnetics and Discontinuous Conduction Mode to Multi-port DC-DC Power Conversion for integrating PV panels with storage (opens in a new tab)

  5. Control design for a unidirectional 20 kW three-phase three-level boost rectifier

    … that can operate in both continuous and discontinuous conduction mode. The main objective of this design is to comply with the norm on harmonic current emission and to satisfy predefined limits on the output voltage. A nested control loop design has been selected with a fast inner current …

    eindhoven Repository record for Control design for a unidirectional 20 kW three-phase three-level boost rectifier (opens in a new tab)

  6. Improvements in integrated high-quality rectifier-regulators

    … voltage is due to the integration of a discontinuous conduction mode boost converter and a continuous conduction mode dc-dc converter. In addition, this power factor correction technique suffers from a high-voltage spike on the switch at turn-off. In this thesis, variable frequency …

    vt Repository record for Improvements in integrated high-quality rectifier-regulators (opens in a new tab)

  7. Complete and Exact Small Signal Analysis of DC-to-DC Switched Power Converters Under Various Operating Modes and Control Methods

    … of operating conditions such as continuous conduction mode (CCM), discontinuous conduction mode (DCM), and discontinuous voltage mode (DVM) and methods of control such as normal voltage mode (NVM), current programming mode (CPM), and V-squared control. The majority of these combinations have …

    portland-state Repository record for Complete and Exact Small Signal Analysis of DC-to-DC Switched Power Converters Under Various Operating Modes and Control Methods (opens in a new tab)

  8. A new small-signal model for current-mode control

    A new small-signal model is developed for pulse-width-modulated converters operating with current-mode control. Four different control schemes are analyzed, all of which use the instantaneous value of the inductor current as part of the control modulation. Continuous-conduction mode and …

    vt Repository record for A new small-signal model for current-mode control (opens in a new tab)

  9. Control of current ripple in dc-dc converters

    … when they operate in both continuous and discontinuous conduction modes. The modified Boost converters operating in discontinuous conduction mode are investigated for the application of power factor correction. They can keep the input current continuous or even ripple free, but be …

    ubc Repository record for Control of current ripple in dc-dc converters (opens in a new tab) Download PDF for Control of current ripple in dc-dc converters (opens in a new tab)

  10. Three-level soft-switched DC-to-DC converter and single-phase, single-stage, three-level AC-to-DC converter

    … a three-level boost converter operating in discontinuous conduction mode (DCM) and a three-level half-bridge DC-to-DC converter with capacitive output filter. The steady-state operation of the DC-to-DC converter and AC-to-DC converter with capacitive output filter are studied with …

    uvic Repository record for Three-level soft-switched DC-to-DC converter and single-phase, single-stage, three-level AC-to-DC converter (opens in a new tab)

  11. A single stage power factor corrected AC/DC converter

    … inherently forces the input current to be discontinuous and ac modulated to achieve high input power factor. The converter's output is operated in discontinuous conduction mode to minimize the bulk capacitor's voltage variations with variations in the output load current. Analysis of the …

    concordia Download PDF for A single stage power factor corrected AC/DC converter (opens in a new tab)

  12. Multi-harmonic Modeling of Low-power PWM DC-DC Converter

    Modeling and simulation of switched-mode Pulse Width Modulated (PWM) DC-DC converters form an essential ingredient in the analysis and design process of integrated circuits. In this research work, we present a novel large-signal modeling technique for low-power PWM DC-DC converters. The proposed …

    tamu Repository record for Multi-harmonic Modeling of Low-power PWM DC-DC Converter (opens in a new tab)

  13. Modeling and implementing a digitally embedded maximum power point tracking algorithm and a series-loaded resonant DC-DC converter to integrate a photovoltaic array with a micro-grid

    … micro-grid. The SLR converter operates in discontinuous conduction mode to minimize the switching losses and for the linear relationship between switching frequency and converter output current. This feature allows for multiple SLR converters to be paralleled, improving the overall …

    nps Repository record for Modeling and implementing a digitally embedded maximum power point tracking algorithm and a series-loaded resonant DC-DC converter to integrate a photovoltaic array with a micro-grid (opens in a new tab)

  14. Energy Harvesting Circuit with Input Matching in Boundary Conduction Mode for Electromagnetic Generators

    … Rather than operate a buck-boost converter in Discontinuous Conduction Mode (DCM) in other impedance matching cases, the proposed method is running the boost topology in Boundary Conduction Mode (BCM). So it would perform resistive input matching, while reducing the converter power loss. The …

    vt Repository record for Energy Harvesting Circuit with Input Matching in Boundary Conduction Mode for Electromagnetic Generators (opens in a new tab)

  15. Energy Harvesting Circuit for Indoor Light based on the FOCV Method with an Adaptive Fraction Approach

    … non-inverting buck-boost converter operating in discontinuous conduction mode (DCM) and constant on-time pulse skipping modulation (COT-PSM) to achieve voltage regulation and maximum power delivery to the load. Battery is used as secondary input also as secondary output to achieve a longer …

    vt Repository record for Energy Harvesting Circuit for Indoor Light based on the FOCV Method with an Adaptive Fraction Approach (opens in a new tab)

  16. POWER FACTOR CORRECTION OF SWITCH MODE POWER SUPPLIES

    … The theoretical waveforms and four different modes of operation for the circuit are shown and discussed. The de characteristics which can be used in the design of the circuit have been established. Each successive operating mode is shown to be an improvement over the preceding one. All the …

    nus Repository record for POWER FACTOR CORRECTION OF SWITCH MODE POWER SUPPLIES (opens in a new tab) Download file for POWER FACTOR CORRECTION OF SWITCH MODE POWER SUPPLIES (opens in a new tab)

  17. Steady-State Time-Domain Analysis of LLCL Resonant Converter

    … of a series resonant converter, frequency domain modelling (FDM) is usually sufficient due to the limited modes of operation. However, for a three or more element resonant tank, multiple modes of operation arises due to which FDM is restricted for analysis for operation below resonant frequency …

    queens Repository record for Steady-State Time-Domain Analysis of LLCL Resonant Converter (opens in a new tab)

  18. MODELING AND CONTROL OF POWER CONVERTERS FOR ENERGY STORAGE INTERFACE ON A MICROGRID

    … boost converter, operating either in continuous conduction mode (CCM) or discontinuous conduction mode (DCM). Four of them are innovative control strategies, implemented by modifying regular K-factor and regular voltage mode control. The fifth is current mode, which is widely used as the …

    nps Repository record for MODELING AND CONTROL OF POWER CONVERTERS FOR ENERGY STORAGE INTERFACE ON A MICROGRID (opens in a new tab)

  19. High Efficiency SEPIC Converter For High Brightness Light Emitting Diodes (LEDs) System

    … which is a modified SEPIC converter working in discontinuous conduction mode (DCM). Different with a conventional SEPIC converter, the middle capacitor is replaced with a valley-fill circuit. The valley-fill circuit could reduce the voltage stress of output diode and middle capacitor under the …

    vt Repository record for High Efficiency SEPIC Converter For High Brightness Light Emitting Diodes (LEDs) System (opens in a new tab)

Page 1 of 3