Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 38 for “"Discrete phase model"”.

  1. Comparative Study on Employing the Discrete Phase Model to Simulate γ-Al2O3/Water Nanofluids with ANSYS-Fluent

    The results of the computational fluid dynamics model was analyzed in ANSYS CFD-Post and was then compared to the analytical data that was calculated using the Hamilton-Crosser equation. The Discrete Phase Model (DPM) has provided a reasonable prediction for calculating the Nusselt number and the …

    gsu Repository record for Comparative Study on Employing the Discrete Phase Model to Simulate γ-Al2O3/Water Nanofluids with ANSYS-Fluent (opens in a new tab)

  2. Numerische Simulation der Verteilung von Verstärkungspartikeln beim gepulsten Plasma-Pulver-Auftragschweißen von Metall-Matrix-Werkstoffen

    … wird durch ein instationäres Magnetohydrodynamik-Modell (MHD) mit temperaturabhängigen Plasmagas-Eigenschaften abgebildet. Ein Partikelmodell auf Grundlage des Dense Discrete Phase Model (DDPM) berücksichtigt Injektion, Flugbahnen und Abschmelzverhalten. Die Partikelverteilung während der …

    qucosa-diss

  3. Computational fluid dynamics study of erosion processes

    … found in the implementation of the Lagrangian phase inFluent which was corrected in a later version. It is suspected that the error affects alarge number of CFD publications in which the Discrete Phase Model was used. Anexperimental methodology and test-rig that is able to erode samples at mass …

    strathclyde Repository record for Computational fluid dynamics study of erosion processes (opens in a new tab)

  4. Numerical Investigation of Wind Turbine Airfoils under Clean and Dusty Air Conditions

    … realizable k-ε and Wray-Agarwal (WA) turbulence models are employed in the calculations. The results are compared with the experimental data for validation. For dusty air condition, simulation of the two-phase flow is conducted using the discrete phase model (DPM) for various concentrations of …

    wustl Repository record for Numerical Investigation of Wind Turbine Airfoils under Clean and Dusty Air Conditions (opens in a new tab)

  5. A parametric study of cutting transport in vertical and horizontal well using computational fluid dynamics (CFD).

    … pipe annulus section was simulated and a model called ‘discrete phase model’ was used to observe the transportation of cuttings in the annulus. Tests were conducted to determine the effects of mud weight, particle size, drilling rate and viscosity on cutting transportation in both vertical …

    wvu Repository record for A parametric study of cutting transport in vertical and horizontal well using computational fluid dynamics (CFD). (opens in a new tab)

  6. IMPACT OF INJECTOR FABRICATION TECHNIQUE ON THE INJECTION AND ATOMIZATION OF JP-10 FOR HIGH-SPEED AERO-PROPULSION SYSTEMS

    … and platelet techniques. ANSYS Volume of Fluids-Discrete Phase Model simulations modeled the injection and atomization of JP-10 into a simulated engine environment, and the results were compared to experimental images for similar conditions. The experimental setup utilized planar laser-induced …

    nps Repository record for IMPACT OF INJECTOR FABRICATION TECHNIQUE ON THE INJECTION AND ATOMIZATION OF JP-10 FOR HIGH-SPEED AERO-PROPULSION SYSTEMS (opens in a new tab)

  7. 3D Numerical Modeling of Hydrodynamic Flow, Sediment Deposition and Transport in Stormwater Ponds and Alluvial Channels

    … ponds and alluvial channels based on a multiphase flow approach in modeling sediment transport. Starting from an existing hydrodynamic Reynolds Averaged Navier-Stokes flow solver, numerical models are developed to predict flow, sediment deposition and transport under the FLUENT software …

    odu Repository record for 3D Numerical Modeling of Hydrodynamic Flow, Sediment Deposition and Transport in Stormwater Ponds and Alluvial Channels (opens in a new tab)

  8. Experimental and theoretical analyses on the ultrasonic cavitation processing of al-based alloys and nanocomposites

    … are used to validate a recently developed multiphase Computational Fluid Dynamics (CFD) model, which is used to model the nanoparticle dispersion during UST processing. The CFD model accounts for turbulent fluid flow, heat transfer and the complex interaction between the molten alloy and …

    alabama Repository record for Experimental and theoretical analyses on the ultrasonic cavitation processing of al-based alloys and nanocomposites (opens in a new tab)

  9. Investigation of Liquid Methanol Combustion Inside a Scramjet Combustor

    … a 2D-symmetric cavity flame-holding scramjet modeled after the HIFiRE-2 geometry flying at Mach 8. The current simulations are inspired by experimental combustion data obtained in testing on a similar geometry at CUBRC. Methanol is used as the liquid fuel due to its higher energy density per …

    alabama Repository record for Investigation of Liquid Methanol Combustion Inside a Scramjet Combustor (opens in a new tab)

  10. Blood Flow Simulation of Particle Trapping in Models of Arterial Bifurcations

    … in blood flow in different arterial bifurcation models. For validation of CFD calculations, a T-junction model and a Y-junction model are analyzed. In both the models, there is one inlet pipe with two outlet pipes creating a symmetric bifurcation at some angle from the centerline of the inlet …

    wustl Repository record for Blood Flow Simulation of Particle Trapping in Models of Arterial Bifurcations (opens in a new tab)

  11. Computational Fluid Dynamics Modeling and Simulations of Fast Fluidized Bed and Moving Bed Reactors for Chemical Looping Combustion

    … fluidized bed CLC system. By employing the dense discrete phase model (DDPM) with hydrodynamics, the fluidization behavior is captured in the simulations, which also shows stable circulation in the reactor. Comparisons of captured static pressures and volume fractions in the reactor show excellent …

    wustl Repository record for Computational Fluid Dynamics Modeling and Simulations of Fast Fluidized Bed and Moving Bed Reactors for Chemical Looping Combustion (opens in a new tab)

  12. Assessing a VOF-to-DPM Computational Fluid Dynamics Technique for Expediting Advanced Agricultural Nozzle Designs in Applications for Enabling Real-Time Spray Drift Mitigation

    … The method utilized, Volume of Fluid-to-Discrete Phase Model (VOF-to-DPM), allowing any arbitrary geometry to be input with the multiphase interaction being evaluated during liquid sheet formation, transition into particles based on user specifications, tracked as discrete particles, with …

    nebraska Repository record for Assessing a VOF-to-DPM Computational Fluid Dynamics Technique for Expediting Advanced Agricultural Nozzle Designs in Applications for Enabling Real-Time Spray Drift Mitigation (opens in a new tab)

  13. Modeling of multiphase turbulent flow in continuous casting of steel

    This thesis develops mathematical models of multiphase turbulent flow and investigates multiphase flow issues arising in the continuous casting process of steel through the application of the developed models. In the continuous casting of steel, argon gas injection at Upper Tundish Nozzle (UTN) …

    uiuc Repository record for Modeling of multiphase turbulent flow in continuous casting of steel (opens in a new tab)

  14. Critical assessment of particle-infused fire suppression system in building structures

    … combustibles. A large eddy simulation (LES) model incorporated with novel user-defined functions (UDFs) to consider particle expansion and charring was proposed in this thesis. This model has been utilised to numerically study an experimental case to investigate the fire suppression behaviour …

    unsw Repository record for Critical assessment of particle-infused fire suppression system in building structures (opens in a new tab)

  15. Evaluation of Leakage and Airflow Pattern in Different Fume Hood Styles

    … fume hood. This research aims to employ a discrete phase model under transient-state fluid dynamic analysis to (1) evaluate the efficacy of fume hoods pollutant containment, (2) airflow patterns, (3) learn how workers' arm and body position and work habits affect both a traditional …

    utk-theses Repository record for Evaluation of Leakage and Airflow Pattern in Different Fume Hood Styles (opens in a new tab)

  16. Numerical simulation of particle separation in centrifugal air classifiers

    … particles in a rotor classifier. The single phase flow in two- and three-dimensional models of the rotor is computed. Two turbulence models, namely K-Omega and RSM, are applied to close the Reynolds-averaged Navier-Stokes equations. Once the single phase flow has been computed the motion of …

    ubc Repository record for Numerical simulation of particle separation in centrifugal air classifiers (opens in a new tab) Download PDF for Numerical simulation of particle separation in centrifugal air classifiers (opens in a new tab)

  17. A dynamic mesh approach to the 2D CFD modelling of ash deposition in solid fuel combustion

    … air combustion in 2D mesh. The dynamic mesh model is also employed in the simulation. A new simulation method, combining with dynamic mesh, discrete phase model and mesh partition method, is developed in the parallel ANSYS FLUENT to simulate the accurate and smooth change of the deposit …

    whiterose Download PDF for A dynamic mesh approach to the 2D CFD modelling of ash deposition in solid fuel combustion (opens in a new tab)

  18. Modeling of multiphase flows in a spray dryer

    … In this thesis, the drying process is studied by modeling with the commercial computational fluid dynamics (CFD) code ANSYS Fluent. This multiphase system which includes a gaseous continuous phase and droplet/particle as the dispersed phase is modeled using an Euler-Lagrangian approach. In …

    chalmers Repository record for Modeling of multiphase flows in a spray dryer (opens in a new tab)

  19. Heat transfer performance investigation of nanofluids flow in pipe

    … conditions. Three different types of numerical models, such as single phase model, Eulerian-Eulerian multi-phase mixture model and Eulerian-Lagrangian discrete phase model have been used while investigating the performance of nanofluids. The most commonly used model is single phase model which …

    glasgow Download PDF for Heat transfer performance investigation of nanofluids flow in pipe (opens in a new tab)

  20. Mathematical modeling of the fluid flow, multicomponent slag-metal reactions and desulfurization efficiency in gas-stirred ladles

    … transient computational fluid dynamics (CFD) model was developed to simulate the fluid flow, phase interfaces and slag-eye characteristics as well as the slag-metal reactions and desulfurization efficiency in the gas-stirred ladles. The volume of fluid (VOF) model, discrete phase model (DPM), …

    alabama Repository record for Mathematical modeling of the fluid flow, multicomponent slag-metal reactions and desulfurization efficiency in gas-stirred ladles (opens in a new tab)

Page 1 of 2