Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 67 for “"Displacement Ductility"”.
-
Seismic Performance Quantification of Reinforced Concrete Shear Walls with Different End Configurations: Experimental Assessment and Data-driven Performance Models
… in Chapters 2 and 3 in terms of their load-displacement relationships, crack patterns, displacement ductility capacities, stiffness degradation trends, curvature profiles, end strains, energy dissipation capabilities, and equivalent viscous damping ratios. In addition, damage states are …
-
Seismic Behavior of concrete filled steel Tubular Built-up columns
… mechanical characteristics, applications, ductility in seismic design, previous experimental researches, and finite element formulation, is firstly illustrated. Six specimens with different grades of concrete and brace arrangements are designed and tested subjected to cyclic loading. The …
-
Seismic Performance of Prestressed Concrete Piles In Cip Reinforced Concrete Pile Caps
… To better understand the moment capacity and ductility of these connections, full-scale tests have been conducted at the University of South Carolina structures lab. Test specimens consisted of 18 in. diameter square piles cast in representative CIP bent cap segments. Two interior pile …
-
Achieving Operational Seismic Performance of RC Bridge Bents Retrofitted with Buckling-Restrained Braces
… zone earthquake demands. In order to reflect displacement demands from subduction ground motions, research studies were conducted to develop quasi-static loading protocols and then investigate their effect on structural bridge damage. Results suggested that subduction loading protocols may …
-
Quasi-static cyclic loading protocol development for the seismic performance assessment of bridge piers
… for several bridge pier designs. Here, target displacement ductility demand levels of two, four, and eight, and crustal, subcrustal, and subduction earthquakes were considered. The number of inelastic cycles and cumulative ductility damage were the primary target demand parameters in the …
-
Seismic retrofit of reinforced concrete beams, columns, and joints with thin steel sheets and steel plates
… tested by Ereckson and failed in column shear at displacement ductility of 2.5, the displacement ductility capacity of the two retrofitted specimens was increased to 8 without post-tensioning and 12 with post-tensioning, corresponding to the pullout and fracture of column longitudinal bars, …
-
3D Stiffness and Strength Degradation Models for Seismic Progressive Collapse Analysis of Reinforced Concrete Structures – Formulations and Implementations Framework
… hardening response; detecting brittle or limited ductility types of failure in shear; capturing degradation of shear strength in the plastic hinge zone with increased displacement ductility; simulating softening in the post-shear failure response; capturing stiffness degradation and cyclic …
-
Evaluation of the Flexural Response of Steel Reinforced UHP-FRC Beams Using Distributed Sensing
… steel reinforcement significantly affects the displacement ductility of UHP-FRC beams in flexure, leading to a brittle failure mechanism due to crack localization. Previous studies faced limitations in fully exploring this interaction due to conventional sensors. Distributed fibre-optic sensors …
-
Multi-Hazard Analysis of Bridges Under Seismic, Flood-Induced Scour, and Hydrodynamic Loading
… affects the fundamental periods, stiffness, displacement ductility, and structural capacity of the bridges. Under combined hazard conditions, moment demands, lateral displacements, and foundation vulnerabilities increase, with shallow scour depths that substantially compromise foundation …
-
Behaviour of Partially Grouted Nominally Reinforced Masonry Shear Walls under Dynamic Loading
… lateral load capacity, stiffness, period, displacement ductility and load reduction factors.</p> <p>The general behaviour of the tested shear walls was dominated by rocking motion where a full length mortar joint crack developed, along with the yielding of reinforcement. The rocking motion …
-
Quasi-static testing of cantilever masonry shear wall segments
… behavior, as expected. Specimens exhibited high displacement ductility (5.6 to 16.7), as expected for flexure-dominated specimens. Specimens constructed with "green" units behaved essentially like otherwise identical specimens constructed with conventional ("gray") units.
-
FRP Confined Reinforced Concrete Circular Cross Section Seismic Applications
… material with potential to increase strength and ductility of columns in conjunction with capacity design methodology, has promise for seismic design. By investigating the displacement, ductility, and flexural strength properties of FRP confined reinforced concrete circular cross sections, this …
-
BEHAVIOUR OF KNEE-BRACE-FRAME UNDER SEISMIC LOADINGS
… the required lateral stiffness whereas the ductility is obtained through shear yielding of the knee element. During severe seismic motion, the knee element acts as a ductile fuse, which yields in shear, whereby brace buckling or yielding of beams and columns is prevented. In order to study …
-
Development and Seismic Evaluation of Pier Systems w/Pocket Connections, CFRP Tendons, and ECC/UHPC Columns
… tests. Results showed that the drift ratio and displacement ductility capacity of the column were 6.9% and 13.8, respectively, and the residual displacement was negligible. The column-footing pocket connection was effective in forming the plastic hinge in the column with no connection damage. …
-
Assessment of ductile endurance of earthquake resisting steel members
… Temperature controlled Crack Tip Opening Displacement (CTOD) testing was then undertaken. The setting of testing temperatures for the CTOD tests were guided by review of the CVN test results, using published CVN to fracture toughness correlation methods. However running cleavage fractures …
-
Performance of RC Bridge Columns under Cyclic Combined Loading including Torsion
… strength and stiffness degradation, rotation and displacement ductility limits, energy dissipation characteristics, and damage progression for these columns are discussed in this dissertation. A unified damage assessment approach was proposed to assess the damage limit states for RC columns under …
-
Experimental methods for investigating the effects of soil settlements and vibrations in cultural heritage buildings, induced by underground structures
… Second, in-plane tests on a differential displacement uplift were conducted in piers and spandrel masonry specimens and the effectiveness of repair and strengthening, namely of grouting injections and a Fiber Reinforced Cementitious Matrix system (FRCM), were assessed. Considering the …
-
Fatigue Performance of Flexural Retrofits for Precast Slab Bridges
… a result of cyclic loading. The CFRP slab had a displacement ductility that was 44% of the baseline slabs, while the steel retrofit maintained similar ductility to the average baseline. The residual strength of the CFRP (after CFRP was removed) was still greater than the calculated strength of …
-
Near-fault ground motions and structural design issues
… impulsive characteristics of the velocity and displacement ground motions observed at long wave periods and may thereby have severe implications for flexible structures. The main characteristics of near-fault ground motions are discussed and it is explained how they are related to rupture …
-
Shake table Seismic Performance Assessment and Fragility Analysis of Lightly Reinforced Concrete Block Shear Walls
… properties, and the contribution of different displacement components to the response of the walls, are presented. More detailed analyses include seismic performance quantification of the walls in terms of inelastic behaviour characteristics, various energy components, and the effective dynamic …
Page 1 of 4