Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 52 for “"Displacement transducers"”.

  1. Role of the nasal septal cartilage in midfacial development

    … suture was measured in real time using linear displacement transducers. In addition, cellular proliferation of the septal chondrocytes was evaluated. The results showed that the growth strain rate of the nasal septal cartilage (0.07 ± 0.03 % length/hour) was significantly higher than that of …

    washington Repository record for Role of the nasal septal cartilage in midfacial development (opens in a new tab)

  2. The detection of mould-strand interaction employing load cells in the continuous casting of billets

    … of the mould with load cells and linear variable displacement transducers was completed to evaluate mould-strand interaction in a continuous casting machine for steel billets. A plant trial was conducted in which several lubricants were tested at four rates. Three carbon grades were cast under …

    ubc Repository record for The detection of mould-strand interaction employing load cells in the continuous casting of billets (opens in a new tab) Download PDF for The detection of mould-strand interaction employing load cells in the continuous casting of billets (opens in a new tab)

  3. The reinforced mechanical properties of zinc oxide nanowire as nanoresonator in atmosphere

    … uses Atomic Force Microscopy (AFM) tips as displacement transducers based on ultra-sensitive atomic force sensing, permitting optimal and straightforward small signal readout precisely. Then the size-effect and half-dimension properties of tunable high quality factor and fundamental …

    alabama Repository record for The reinforced mechanical properties of zinc oxide nanowire as nanoresonator in atmosphere (opens in a new tab)

  4. Development of a heterodyne interferometer for nanometer scale displacement measurement

    … for the purpose of nanometer scale displacement measurements. High resolution displacement transducers are employed in numerous applications, including vibration analysis, surface profiling, position control, tilt meters, and non-destructive quality evaluation of solid parts. The …

    uvic Repository record for Development of a heterodyne interferometer for nanometer scale displacement measurement (opens in a new tab)

  5. Modeling and control of the Pr-500-Fl pavement profiler cutter system

    … are used to acquire terrain profile data. Linear displacement transducers are used to measure the vertical hydraulic leg displacements required for cutter depth adjustments. A dual axis angular tilt sensor was installed as an additional vehicle safety feature. A description of the design and …

    unlv Repository record for Modeling and control of the Pr-500-Fl pavement profiler cutter system (opens in a new tab) Download PDF for Modeling and control of the Pr-500-Fl pavement profiler cutter system (opens in a new tab)

  6. Computer aided deflection measurements of an aircraft wing

    … acquisition and analysis. The system includes 20 displacement transducers, associated wiring and support framework, a dual DC voltage power supply, two Labmaster data acquisition expansion boards, an AT-compatible computer with 80286 processor and 80287 math co-processor, and ASYST software to …

    nps Repository record for Computer aided deflection measurements of an aircraft wing (opens in a new tab)

  7. Load Rating of Concrete Slab-span Bridges

    … a suite of instrumentation that included displacement transducers, strain gauges, accelerometers, and tiltmeters. A three- dimensional solid-element finite element model was used to determine an expected range of behaviors and corroborate the field data regarding how load distributed when …

    umn Repository record for Load Rating of Concrete Slab-span Bridges (opens in a new tab)

  8. Laboratory Performance of Geosynthetic-Stabilized Pavement Sections

    … of approximately one-half Hertz. The resulting displacement of the pavement surface was monitored by an array of linear variable displacement transducers (LVDTs). The performance of each pavement section was evaluated using the American Association of State Highway and Transportation Officials …

    vt Repository record for Laboratory Performance of Geosynthetic-Stabilized Pavement Sections (opens in a new tab)

  9. Design and control of a space based two link manipulator with Lyapunov based control laws

    … manipulators was obtained from Rotary Variable Displacement Transducers (RVDT). The equations of motion were developed assuming that the main body and manipulator were rigid bodies. the resulting coupled, nonlinear, time invariant equations of motion were used to analyze the dynamics and …

    nps Repository record for Design and control of a space based two link manipulator with Lyapunov based control laws (opens in a new tab)

  10. Evaluation of the seismic response of gentle slopes in soft clay

    … using accelerometers, pore pressure sensors and displacement transducers. Complementary data were obtained using particle image velocimetry (PIV). The centrifuge test data were utilized to calibrate numerical models in the software OpenSees using three-dimensional soil columns and a dynamic …

    brazil-uerj Repository record for Evaluation of the seismic response of gentle slopes in soft clay (opens in a new tab)

  11. Load Distribution of Geosynthetic Stabilized Layers over Weak Subgrade

    … a 300 mm diameter circular plate at a constant displacement rate until the failure of the test section. The surface and interface displacements were monitored with displacement transducers, horizontal and vertical pressures at the interface with earth pressure cells, and pressure mapping on the …

    ku Repository record for Load Distribution of Geosynthetic Stabilized Layers over Weak Subgrade (opens in a new tab)

  12. Compressive strength and constitutive behavior of clay tile prisms

    … relations were determined by linear variable displacement transducers over gage lengths that included mortar joints. The stress - strain curve was approximately linear up to about 33% of ultimate stress. From 33% of ultimate to ultimate, an exponential fit was more appropriate to model the …

    ut-knoxville Repository record for Compressive strength and constitutive behavior of clay tile prisms (opens in a new tab)

  13. Premature distress mitigation in continuously reinforced concrete pavements

    … monitored using steel and concrete strain gages, displacement transducers and data acquisition systems. The effect of the use of coarse aggregate type and time of concrete placement on occurrence of Y-shaped and narrow transverse cracks in CRCP were also studied. The longitudinal reinforcement and …

    ttu Repository record for Premature distress mitigation in continuously reinforced concrete pavements (opens in a new tab)

  14. Improved Control of Hydraulically Articulated Mining Booms

    … boom positioning, is carried out using angular displacement transducers, a timer IC and software routines. The kinematic equations have been developed for referencing the boom, which is mounted on a free-ranging chassis, to the tunnel coordinates.

    aston Repository record for Improved Control of Hydraulically Articulated Mining Booms (opens in a new tab) Download PDF for Improved Control of Hydraulically Articulated Mining Booms (opens in a new tab)

  15. Joint elimination retrofits and thermal loading analysis in plate girder bridge using health monitoring and finite element simulations

    … strain gauges, and linear differential displacement transducers. Following sensor installation, controlled load testing was conducted and the collected data evaluated against numerical and analytical predictions. The installed sensors will allow for long-term monitoring of the bridge to …

    colostate Repository record for Joint elimination retrofits and thermal loading analysis in plate girder bridge using health monitoring and finite element simulations (opens in a new tab)

  16. Beneficial use of off-specification fly ashes to increase the shear strength and stiffness of expansive soil-rubber (ESR) mixtures

    … was measured using conventional external displacement transducers. Very-small strain stiffness was evaluated from shear wave velocity measurements using a bender element apparatus. Results suggest that the shear strength and stiffness improvements imparted by the off-specification fly …

    colostate Repository record for Beneficial use of off-specification fly ashes to increase the shear strength and stiffness of expansive soil-rubber (ESR) mixtures (opens in a new tab)

  17. Steel, steel/concrete composite and reinforced concrete beams and columns exposed to fire

    … used. Deflection measurements were made using displacement transducers placed at different positions. Using the new method of analysis a simple design method for steel columns subjected to non-uniform temperature distribution across the depth of the section has been developed. The method has …

    city-london Download PDF for Steel, steel/concrete composite and reinforced concrete beams and columns exposed to fire (opens in a new tab)

  18. Multi-axial real-time hybrid simulation framework for testing nonlinear structure systems with multiple boundary interfaces

    … with the responses measured by load cells and displacement transducers. Traditionally, these actuators impose boundary condition displacements at slow speeds, while damping and inertial components for the physical specimen are numerically calculated. This slow application of the boundary …

    uiuc Repository record for Multi-axial real-time hybrid simulation framework for testing nonlinear structure systems with multiple boundary interfaces (opens in a new tab)

  19. Investigation of effects of temperature and swelling on wellbore stability in unconventional reservoirs

    … modified to ac-commodate five Linearly Variable Displacement Transducers (LVDTs) to measure Young’s Modulus (E) and Poisson’s ratio (ν). Various experiments were run to quanti-fy the effect of temperature on the rock compressive strength, E, and ν. Experiments have shown a distinct change in the …

    ttu Repository record for Investigation of effects of temperature and swelling on wellbore stability in unconventional reservoirs (opens in a new tab)

  20. An investigation of the efficacy of a water-cooled chill in improving the as-cast structure of the main bearing bulkhead in A319 engine blocks

    … locations in the casting, and “Linear Variable Displacement Transducers” (LVDTs) to measure the gap size at the interface between the chill and the casting. A coupled thermal-stress mathematical model was developed in “ABAQUS 2016” to reproduce the experimental conditions and provide insight …

    ubc Repository record for An investigation of the efficacy of a water-cooled chill in improving the as-cast structure of the main bearing bulkhead in A319 engine blocks (opens in a new tab) Download PDF for An investigation of the efficacy of a water-cooled chill in improving the as-cast structure of the main bearing bulkhead in A319 engine blocks (opens in a new tab)

Page 1 of 3