Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 198 for “"Displacement-based"”.
-
Displacement-based grasping of deformable objects
… deformable objects that specifies finger displacements. This not only ensures equilibrium under the elasticity theory, but also enhances stability and simplifies finger control in the implementation.</p> <p>Deformable modeling is carried out using the Finite Element Method (FEM), for which …
-
Displacement-based dynamometer for milling force measurement
… force measurement. The monolithic design is based on constrained-motion/flexure-based kinematics, where force is inferred from displacement measured using a low-cost optical interrupter (i.e., a knife edge that partially interrupts the light beam in an emitter-detector pair). The …
-
Design Of Dna Strand Displacement Based Circuits
… novel approaches for the design of DNA based circuits. There are many recent developments in the medical field such as the development of biological nanorobots, SMART drugs, and CRISPR-Cas9 technologies. There is a strong need for circuits that can work with these technologies and …
-
The development of displacement-based toroidal elasticity.
… curved pipes, elbows, and toroidal shells. A displacement-based approach to TE is used in the present study, and analytical solutions are set up using the method of successive approximations. Three problems are solved analytically for the first time to illustrate the approach. The first …
-
Displacement-Based Seismic Design of Timber Structures
… vulnerability of wooden structures, using a displacement-based approach. After a brief introduction on the seismic behaviour of timber structures, the general Direct Displacement-Based Design (Direct-DBD) procedure and the state-of-the-art are presented, with clear reference to the …
-
Displacement-based design of concrete tilt-up walls
… concrete code CSA Standard A23.3 regarding the displacement demand of concrete panel, which says: "Tilt-up Wall Panels shall be designed to the requirements of Clause 23 except that the requirements of Clause 21.7.2 shall apply to wall panels with openings when the maximum rotational demand on …
-
Holonomic Elastoplastic Truss Design Using Displacement Based Optimization
A Displacement Based Optimization (DBO) approach was applied to truss design problems with material nonlinearities, to explore feasibility and verify efficiency of the approach to solve such problem. Various truss sizing problems with holonomic (path-independent) elastoplastic laws were …
-
Displacement-based two-finger grasping of deformable planar objects
… objects using two fingers which specifies finger displacements rather than grasping forces. Grasping deformable objects must maintain its equilibrium before and after the induced deformation. The deformed shape and grasping force are computed using the finite element method (FEM). The equilibrium …
-
Displacement-based analysis and design of rigid retaining walls during earthquakes
… codes. A computer program capable of computing displacement using real time history records or equivalent sinusoidal motions was developed. Finally, a dynamic design procedure was proposed for practicing engineers. The study revealed that maximum shear modulus in foundation soil, maximum ground …
-
Displacement-based seismic design and tools for reinforced masonry shear-wall structures
… of a multi-university project on “Performance-based Seismic Design Methods and Tools for Reinforced Masonry Shear-Wall Structures.” Within the context of that project, the objective of the research described in this dissertation was to develop and validate a specific displacement-based seismic …
-
Application of displacement-based design method to blast-resistant reinforced concrete structures
… results of the research done on application of displacement-based design (DBD) method to blast-resistant reinforced concrete (RC) structures"--Abstract, page iv.
-
"Displacement-Based Strategies for the Performance-Based Seismic Design of ""Short"" Bridges Considering Embankment Flexibility"
… the substructure columns. Existing procedures, based on force reduction factors, do not account for the significant role played by the embankments. A displacement-based approach for the design of the columns is proposed, in which smaller diameter columns, possibly with higher axial load ratios, …
-
Performance-based Seismic Design of Multi-Story Light-frame Wood Buildings using Adaptive Displacement-based Design Procedure
… floor plan in the first story. The current force-based design procedure, namely the Equivalent Lateral Force (ELF) procedure, does not explicitly consider the contribution of non-structural elements. This research (1) studied soft-story deficiency in light-frame wood buildings due to unintended …
-
Displacement-based design of reinforced concrete moment resisting frame incorporating cross laminated timber infill and metallic damper connectors
… of this proposed system was carried out with the displacement-based design framework and the design was successfully verified. First, this study focused to numerically model the conventional metallic (steel slit) damper and validated with the experimental result using the Abaqus finite element …
Page 1 of 10