Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 35 for “"Distortional Buckling"”.

  1. Local and distortional buckling of perforated steel wall studs

    The local and distortional buckling behaviour of flange and web-stiffened compression members was investigated. In particular, the behaviour of web-perforated sections was investigated both numerically and experimentally. Perforation reduces the perpendicular flexural stiffness of the web and thus …

    aalto Repository record for Local and distortional buckling of perforated steel wall studs (opens in a new tab)

  2. Distortional Buckling Formulation for the Analysis of Composite thin-walled beams

    … arrangements and sizes. While lateral torsional buckling is a major design concern for thin-walled beams used as girders distortional effects may become important depending on restraint conditions as well as for beams with slender webs, stocky flanges, and/or shorter spans. This thesis introduces …

    concordia Download PDF for Distortional Buckling Formulation for the Analysis of Composite thin-walled beams (opens in a new tab)

  3. Investigation of Single Span Z-Section Purlins Supporting Standing Seam Roof Systems Considering Distortional Buckling

    … method for the determination of the governing buckling strength for cold-formed purlins supporting a standing seam metal roof system is the 1996 AISI Specification for the Design of Cold-Formed Steel Structural Members, which contains provisions for local and lateral buckling. Previous research …

    vt Repository record for Investigation of Single Span Z-Section Purlins Supporting Standing Seam Roof Systems Considering Distortional Buckling (opens in a new tab)

  4. Investigação analítica, numérica e experimental do modo de flambagem distorcional em perfis formados a frio

    This work deals with distortional buckling of cold-formed lipped channels subject to uniform compression. A review of buckling in thin-walled structures is presented focusing on the distortional mode. Given the still inexistence of an analythical approach to distortional buckling, a rational …

    brazil-uerj Repository record for Investigação analítica, numérica e experimental do modo de flambagem distorcional em perfis formados a frio (opens in a new tab)

  5. Cold-Formed Steel Behavior: Elastic Buckling Simplified Methods for Structural Members with Edge-Stiffened Holes and Purlin Distortional Buckling Strength Under Gravity Loading

    Elastic Buckling Simplified Methods for Structural Members with Edge-Stiffened Holes: Presently, the current design methods available to engineers to predict the strength of cold-formed steel members with edge-stiffened holes remains largely unaddressed in the North American Specification for the …

    vt Repository record for Cold-Formed Steel Behavior: Elastic Buckling Simplified Methods for Structural Members with Edge-Stiffened Holes and Purlin Distortional Buckling Strength Under Gravity Loading (opens in a new tab)

  6. Global optimisation of cold-formed steel sections

    … For zed, channel and sigma section, the local buckling, distortional buckling and lateral-torsional buckling are considered respectively herein. Currently, the local buckling is based on the BS 5950-5:1998 and EN 1993-1-3:2006. The distortional buckling is calculated by the direct strength …

    aston Download PDF for Global optimisation of cold-formed steel sections (opens in a new tab)

  7. Behavior and DSM design of cold-formed steel “S" type beams experiencing distortional failure

    … a numerical analysis investigation about the buckling and post-buckling behavior, ultimate strengthand Direct Strength Method (DSM) design predictions applied to cold formed steel beams with “S” type and lipped channels (plane and stiffened) sections experiencing distortional buckling. The …

    brazil-uerj Repository record for Behavior and DSM design of cold-formed steel “S" type beams experiencing distortional failure (opens in a new tab)

  8. Strength and Behavior of Advanced High Strength Steel Structural Components

    … factor equations are also proposed. The buckling behavior of AHSS beam members is studied both experimentally and numerically. A series of four-point bending tests on AHSS beams have been performed. The current Direct Strength Method (DSM) is found unconservative for these tests for not …

    jhu Repository record for Strength and Behavior of Advanced High Strength Steel Structural Components (opens in a new tab)

  9. Experimental and Analytical Studies of the Behavior of Cold-Formed Steel Roof Truss Elements

    … engineer typically tries to improve the local buckling behavior of the cold-formed steel elements. The complex hat shape has proved to limit the negative influence of local buckling, however, distortional buckling can be the controlling mode of failure in the design of chord members with …

    vt Repository record for Experimental and Analytical Studies of the Behavior of Cold-Formed Steel Roof Truss Elements (opens in a new tab)

  10. Dimensionamento à flambagem distorcional via MRD de colunas metálicas perfuradas em perfil rack

    … compression load and the lengths in which the distortional buckling occurs, employing for this purpose computational numerical analyzes via MEF. These sections are widely used in industrial storage systems, known as pallet carriers, and also have drills, which influence the resistance and …

    brazil-uerj Repository record for Dimensionamento à flambagem distorcional via MRD de colunas metálicas perfuradas em perfil rack (opens in a new tab)

  11. Axial load capacity of cold-formed steel sections.

    … these members are often controlled by local and distortional buckling. These buckling modes can lead to a substantial reduction in the load-bearing capacity of these members. The current trend towards deeper, more slender sections makes this stability problem even more critical.

    oklahoma-thes Repository record for Axial load capacity of cold-formed steel sections. (opens in a new tab)

  12. Behaviour, optimisation and design of cold-formed steel purlins

    … to a variety of instabilities including local, distortional, lateral torsional buckling or interactions thereof. Currently, most cold-formed producers try to optimise their cross-section geometries to achieve maximum strength with minimum material usage and hence gain a competitive advantage in …

    birmingham Download PDF for Behaviour, optimisation and design of cold-formed steel purlins (opens in a new tab)

  13. Structural Behaviour of a Novel Seamed Cold-formed Box Section

    … can be concluded in this research that: • Local-distortional interaction buckling governs the strength of the section under axial compression. • Local-distortional interactive buckling and pure distortional buckling governs the seamed box section’s behaviour in bending when the seamed flange is …

    auckland-ms Repository record for Structural Behaviour of a Novel Seamed Cold-formed Box Section (opens in a new tab)

  14. DESIGN METHODS FOR LARGE RECTANGULAR INDUSTRIAL DUCTS

    … flange and restrained tension flange lead to distortional buckling of the stiffeners. The current methods do not address distortional buckling adequately. A parametric study on dimensionless parameters governing the behaviour and strength of stiffened plat panels was conducted. The study …

    mcmaster Repository record for DESIGN METHODS FOR LARGE RECTANGULAR INDUSTRIAL DUCTS (opens in a new tab)

  15. Elastic buckling solutions for thin-walled metal columns with perforation patterns

    … strip methods for use in predicting elastic buckling strength of cold-formed steel columns. These methods were developed by examining elemental behavior of cross-sections in eigen-buckling analyses and validated using a large database of finite element rack-type columns with perforation …

    vt Repository record for Elastic buckling solutions for thin-walled metal columns with perforation patterns (opens in a new tab)

  16. Design of High-Strength Polygonal Cold-Formed Steel Built-Up Sections Using the Direct Strength Method

    … to cross-sectional instabilities like local and distortional buckling, which reduce their ultimate capacity. To enhance their strength, connecting individual sections using fasteners to create built-up sections is advantageous. The research employs the Direct Strength Method (DSM) as a practical …

    gatech Repository record for Design of High-Strength Polygonal Cold-Formed Steel Built-Up Sections Using the Direct Strength Method (opens in a new tab)

  17. Análise da interação entre os modos de flambagem local e distorcional em perfis de aço formados a frio com seção rack sob compressão axial

    … were developed to investigate the localdistortional buckling interaction (LD) of thin-walled steel columns with lipped channel cold-formed section (CFS). However, extending the findings to columns displaying other cross-sectional shapes it is essential to assess the generality of the …

    brazil-uerj Repository record for Análise da interação entre os modos de flambagem local e distorcional em perfis de aço formados a frio com seção rack sob compressão axial (opens in a new tab)

  18. Effect of Thermal Loading on the Performance of Horizontally Curved I-Girder Bridges

    … thermal loading leads to global and local buckling along the Igirder web centerlines, lateral distortional buckling in the web cross section, and thermal stresses in the I-girder webs. Although pier flexibility is shown to reduce the magnitude of thermally induced local and lateral …

    wvu Repository record for Effect of Thermal Loading on the Performance of Horizontally Curved I-Girder Bridges (opens in a new tab)

Page 1 of 2