Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 21 for “"Distributed Electric Propulsion"”.
-
Design, development and evaluation of a distributed electric propulsion testbed aircraft
… overall system technology readiness level of a distributed electric propulsion (DEP) based control system. The primary objectives of this work were to experimentally characterize the propulsion-airframe interactions inherent to DEP vehicles to aid in modeling and to explore and validate the use …
-
System identification for development of distributed electric propulsion vertical take-off vehicles
This thesis presents a complete procedure for estimating the inertia matrix of a multi-rotor vertical take-off and landing vehicle. The procedure starts with an overview of vehicle dynamics. An estimator and a controller are introduced based on these dynamics, which can be tuned to the desired …
-
Aero-propulsive characteristics of an overwing distributed electric propulsion system with vectored thrust
… conducted on a quasi-2D S8036 airfoil with a distributed electric propulsion (DEP) system. An overwing ducted fan system was tested with varied thrust angles achieved by deflecting the fan exit flow direction. The DEP system was comprised of five electric fans mounted on the upper surface of …
-
Aeroelastic design of a lightweight distributed electric propulsion aircraft with flutter and strength requirements
Distributed electric propulsion is a promising technology currently being considered for gen- eral aviation-class aircraft that has the potential to increase range and performance without sacrificing low-speed flight characteristics. However, the high-aspect ratio wings enabled by distributed …
-
Distributed Electric Propulsion Conceptual Design Applied to Traditional Aircraft Take Off Distance Through Multidisciplinary Design
… aircraft show promise for urban air transport, distributed electric propulsion on existing aircraft may offer an immediately implementable alternative. Dis- tributed electric propulsion has the potential of increasing the aircraft thrust-to-weight ratio and lift coefficient high enough to enable …
-
An Investigation into the Potential Benefits of Distributed Electric Propulsion on Small UAVS at Low Reynolds Numbers
Distributed electric propulsion systems benefit from the inherent scale independence of electric propulsion. This property allows the designer to place multiple small electric motors along the wing of an aircraft instead of using a single or several internal combustion motors with gear boxes or …
-
On the Analysis and Design of Series Hybrid Distributed Electric Propulsion with Boundary Layer Ingestion of Remotely Piloted Aircraft
[ES] En el presente trabajo se explora posibles soluciones a dos hechos correlacionados que podrían comprometer hasta cierto punto nuestro futuro. Por un lado, el crecimiento de la flota de aeronaves pequeñas en los próximos años, ya sean tripuladas o no, es una realidad. El acceso a estas …
-
Development and evaluation of a dynamically scaled testbed aircraft for a visual inertial odometry dataset
… (Cirrus SR22T) is to serve as a testbed for both Distributed Electric Propulsion (DEP) aircraft research and for Visual Inertial Odometry (VIO) research. The aircraft is used as a baseline to compare with the DEP aircraft, to draw conclusion regarding the effect of changing to a DEP configuration, …
-
Design Optimization of a Regional Transport Aircraft with Hybrid Electric Distributed Propulsion Systems
… NASA's X-57, is one such concept using distributed electric propulsion (DEP) technology. Although practical implementation of DEP is achievable due to the scale invariance of highly efficient electric motors, the current battery technology restricts its adoption for commercial transport …
-
Modeling of a Hybrid-Electric System and Design of Control Laws for Hybrid-Electric Urban Air Mobility Power Plants
… congestion. The current designs make use of Distributed Electric Propulsion (DEP): either fully electric or hybrid electric. The hybrid engine system consists of two power sources: prime movers, such as turbine engines, and batteries. The hybrid systems offer higher range and endurance …
-
An Integrated Framework to Evaluate Off-Nominal Requirements and Reliability of Novel Aircraft Architectures in Early Design
… in early preliminary design. A test distributed electric propulsion (T-DEP) aircraft inspired by the X-57 is utilized as a test problem to demonstrate this framework
-
Aeroelasticity and gust response of wings equipped with a distributed propulsion system
… structures and the versatility of their distributed electric propulsion (DEP) system make them somewhat different from conventional aircraft, thus necessitating fresh investigations into the aeroelastic stability and response of UAM vehicles. The study employs a wing model based on …
-
Machine learning optimized fabrication of bi-modal capillary wick structures using high voltage press sinter method (PSM) for efficient and compact EVTOL thermal management
… vehicles (VTOL). With the recent development of distributed electric propulsion (DEP) in EVs, attempts are being made to implement electrified propulsion systems in VTOLs. However, the efficiency of these aircraft depends on the efficient thermal management of the propulsion system. Extensive …
-
Computational Investigation of the Effects of Rotor-on-Rotor Interactions on Thrust and Noise
Recent advancements in electric propulsion systems have made electric vertical takeoff and landing aircraft a reality, and one that is seen as a partial solution to the growing issue of urban traffic congestion. Designing an aircraft with multiple smaller motors and rotors spread across the …
-
A new framework for estimating noise impact of novel aircraft
… (including noise exposure contours) for various electric aircraft featuring Distributed Electric Propulsion (DEP), as well as for a Blended-Wing-Body (BWB) aircraft.<br/><br/>The results obtained for future scenarios generally conform with the expected trends (deriving from e.g. higher-fidelity …
-
High-density multilevel power converters for use in renewable and transportation applications
… as inverters driving low-inductance high-density electric machines. Much of the prior work on the FCML converter has focused on various aspects of converter control. However, the demonstration of the power density and efficiency benefits of the topology have often been masked by the use of …
-
Lpv modeling and adaptive mpc of a tilt-rotor aircraft
… and control of an urban air mobility (UAM) electric vertical take-off and landing (eVTOL) aircraft with tilt-rotors, covering a brief UAM survey, analytical nonlinear flight modeling, control-oriented linear parameter varying (LPV) modeling, adaptive model predictive control (MPC) design and …
-
Conceptual Design of High-Lift Propeller Systems for Small Electric Aircraft
The maturation of electric propulsion technologies presents intriguing new degrees of freedom for aircraft designers including the ability to distribute many small propellers upstream of the wing's leading edge to augment the lift produced. These propellers are termed "high-lift propellers" because …
-
The effects of aero-propulsive coupling on aircraft with distributed propulsion systems
… which are present for aircraft equipped with distributed electric propulsion (DEP) systems consisting of over-wing trailing-edge mounted (OWTE) arrays of ducted fans, and to identify the influence of those effects on aircraft dynamics. The first experiment consisted of low-speed wind-tunnel …
-
Advances in Aero-Propulsive Modeling for Fixed-Wing and eVTOL Aircraft Using Experimental Data
Small unmanned aircraft and electric vertical takeoff and landing (eVTOL) aircraft have recently emerged as vehicles able to perform new missions and stimulate future air transportation methods. This dissertation presents several system identification research advancements for these modern aircraft …
Page 1 of 2