Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 39 for “"Dopant Diffusion"”.
-
Characterization of Dopant Diffusion in Bulk and lower dimensional Silicon Structures
… and drain regions and the redistribution of the dopants in the channel greatly impact the electrical characteristics of the fabricated device. Thus, in nano-scale and reduced dimension transistors, a tight control of doping levels and formation of pn junctions is required. Therefore, deeper …
-
Continuous Wave Laser Full Area Surface Melting for Ultrafast, Deep-dopant Diffusion in Crystalline Silicon
… of the device whereas the minority carrier diffusion length in the emitter itself is higher than the emitter thickness. Defect formation mechanisms and defect reduction measures are investigated guided by thermal and mechanical COMSOL models specifically developed for this thesis. Although …
-
First-principles and kinetic Monte Carlo simulation of dopant diffusion in strained Si and other materials
… physics and processes are incorporated. Current diffusion simulators include models for ion implantation, dopant and defect diffusion, point defect/dopant /extended defect interactions, diffusion transients, stress, electric fields, charged defects and more. The study for this Ph.D. focuses on …
-
Doping of Organic Semiconductors: Effects of Crosslinking and Dopant Substituents
Doping is the process of addition of dopants to host semiconductors to improve their conductivity and charge transport behavior. Organic solids are held together by weak van der Waals interactions between the molecules and Coulombic attractions between the charged species. Because of these weaker …
-
Modeling Sub-Millisecond Laser Spike Annealing Processes
… of the high temperatures thermal stresses and dopant diffusion were studied in this work with the aim of mitigating their effects. Calibrated temperature profiles were used as inputs to in Finite Element Method (FEM) simulations to calculate thermal stresses during laser spike annealing. The …
-
Defect Engineering in the formation of Ultra-shallow junctions for advanced nano-metal-oxide-semiconductor technology
… anomalous phenomena such as transient enhanced diffusion (TED) and dopant-defect clustering, which are detrimental to the desired USJ properties. The primary study here is concerned with the investigation of co-implantation of C/F/N, advanced flash annealing scheme as well as surface state in …
-
Helping Observe and Tune Diffusion Using Mn2+ Photophysics in Inorganic Nanocrystals after Growth
… excited states and Mn2+, a model magnetic dopant, are investigated, primarily by magnetic circular dichroism (MCD) spectroscopy. These data reveal a new mechanism of nanocrystal doping characterized by thermodynamic addition of cation + anion pairs, followed by diffusional mixing. A broad …
-
Nanowire Zinc Oxide MOSFET Pressure Sensor
… Silicon Dioxide growth, photolithography, dopant diffusion, and aluminum metallization were used to fabricate a basic MOSFET. In the other hand, a combination of aluminum anodization, alumina barrier layer removal, ZnO atomic layer deposition (ALD), and wet etching for nanowire release were …
-
Evolution of Vacancy Supersaturations in MeV Si Implanted Silicon
… supersaturations were measured with Sb (B) dopant diffusion markers. Vacancies in clusters were profiled by Au labeling; a new technique based on the observation that Au atoms trap in the presence of open-volume defects. The experiments described in this dissertation are also unique in that …
-
FROM MASTER EQUATION TO FREE ENERGY FUNCTIONALS WITH APPLICATIONS TO DIFFUSION
Diffusion is a fundamental phenomenon resulting from stochastic processes, giving rise to a wide range of natural phenomena and determine essential manufacturing processes, with some of the most critical ones being the smoothness of semiconductor heterostructure interfaces such as p-n junctions and …
-
Lattice Recovery and Dopant Activation in Beta-Phase Gallium Oxide with High-Dose Germanium Implantation
… Ge in β-Ga$_2$O$_3$ is also a promising n-type dopant. To achieve low contact resistance for device applications, n-type layers with carrier concentration above 10$^{19}$ cm$^{-3}$ are required. Homoepitaxial (010) β-Ga$_2$O$_3$ films grown by MOCVD were implanted with Ge to form box profiles of …
-
Design and Development of Microstructured Optical Fibre Pressure Sensor
… allows hightemperature operation by avoiding dopant diffusion. Temperature-compensated single point and multipoint pressure measurements are demonstrated at temperatures up to 900°C using a multimode interferometric technique. Numerical studies are presented and compared with experimental …
-
Formation of Supersaturated Alloys by Ion Implantation and Pulsed-Laser Annealing
… annealing. The maximum Group III and Group V dopant concentrations that can be incorporated into substitutional lattice sites are determined for the present laser-annealing conditions. Dopant profiles have been measured before and after annealing using Rutherford backscattering. These …
-
Development of a Self Aligned CMOS Process for Flash Lamp Annealed Polycrystalline Silicon TFTs
… in CMOS transistors revealed significant lateral dopant diffusion into the channel greatly increasing the minimum channel length required for a working device. This was further confounded by the gate overlap due to misalignment during lithography patterning steps. Through the use of furnace dopant …
-
Micro-structural modifications of semiconductor systems under irradiation: experiment, modeling and simulation analysis.
… is the post-implant kinetics of the defects-dopant system in the extremely far-from-the equilibrium conditions caused by the laser irradiation both in the non-melting and melting regime. For this purpose, the activation mechanism in the solid phase of phosphorus implanted silicon under …
-
SILICON ON INSULATOR BIPOLAR JUNCTION TRANSISTORS FOR FLEXIBLE MICROWAVE APPLICATIONS
… to electrode material damage and ultimately dopant diffusion in the BJT. Finally, device design improvements are proposed to address the problem of localized heating and increase device lifetime under testing conditions. High values for DC current gain suggest that future modifications should …
-
The diffusion and segregation coefficient of germanium in silica
… with germanium, and then annealing to permit diffusion and to promote crystallization. The samples were analyzed with RBS before and after annealing to determine the distribution of germanium. Initially, the implanted germanium peak was observed to shift towards the surface which is attributed …
-
InAs avalanche photodiode linear array for low photon applications
… duration anneals have been employed to promote dopant diffusion to form the p type region. The dark current and responsivity of the planar APDs show improvement over as processed samples following a shallow surface etch, indicating the removal of surface damage induced by ion implantation. …
-
Analysis of Thermally Diffused Single Mode Optical Fiber Couplers
The phenomenon of dopant diffusion as a viable means of coupler fabrication is investigated. It is well known that the diffusion of dopants can improve the uniformity of multimode star couplers manufactured by the fused biconical taper technique. The theoretical basis for the same phenomenon in a …
-
Dynamics of defects and dopants in complex systems: si and oxide surfaces and interfaces
Precise control of dopant redistribution and activation in the vicinity of the semiconductor-dielectric interface has become crucial for fabrication of deep sub-micron metal-oxide -semiconductor field-effect transistor devices. During the process of ion implantation and thermal oxidation a great …
Page 1 of 2