Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 8 of 8 for “"Double-Tees"”.
-
Experimental Evaluation of Foam-Void Double-Tees
… the shipping of typical pre-stressed concrete double-tees (DT) for parking decks to one member per trip. The objective of this study is to reduce the self-weight of these members to facilitate two-at-a-time shipping, and thus enable lower shipping costs and reduced environmental footprint. In …
-
Optimization of prefabricated joists
… openings are two-fold. First, a reduction of the double tee weight itself is achieved. Second, the web openings are used to run the mechanical ducts and electrical wires through the webs rather than beneath them, which reduces floor-to-floor height and results in an overall building height …
-
Modeling and behavior of prestressed concrete spandrel beams.
… Spandrels in parking garages typically support double-tee beams (or double tees) on ledges, spot corbels, or pockets, all of which introduce lateral eccentricity as the double tee loads are transferred to the spandrels. Upon connecting the spandrels to the double tees using deck ties, these …
-
Experimental Evaluation of Post-Cracking Deflection Behavior in Prestressed Concrete Beams
… procedures are detailed for full sized, typical double tee sections designed by Metromont. This research analyzed and commented on the performance of the different rectangular beams and double tees in relation to calculated deflection prediction curves. Additional comments are made on the …
-
Live Load Testing and Analysis of a 48-Year-Old Double Tee Girder Bridge
A 48-year-old prestressed double tee girder bridge located on Icy Springs road in Coalville, Utah, was tested for live load. The test measured strains, deflections and rotations. The instruments used for measuring the respective measurements were strain gages, deflectometers ("twangers") and …
-
Innovative use of UHPC in unbonded post-tensioned floor system
… of developing precast, prestressed UHPC Double Tee beams—a concept that has been successfully used with concrete precast, prestressed concrete. Design runs revealed that UHPC Double Tees were at best only 20 percent lighter than their concrete counter-part, making them economically …
-
Transfer Length, Development Length, Flexural Strength, and Prestress Loss Evaluation in Pretensioned Self-Consolidating Concrete Members
… steel form used for creating structural double tees. Each development length member was a stub tee. Iterative load testing was performed to determine the development length of each SCC and conventional mix. Development lengths for both SCC mixes were approximately 20 percent shorter than …
-
Immediate Deflection Calculations Of Transition And Cracked Prestressed Concrete Sections
… cracked sections used in practice, particularly double-tee members. A sample of rectangular and double tees (n = 26) with prestressed reinforcement ratios varying from 0.06% to 0.45% was selected. Each specimen was modeled with five different equations to predict the deflection and loaded …