Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 16 of 16 for “"Down-conversion Mixer"”.
-
Design And Simulation Of Cmos Active Mixers
… of the Radio Frequency transceiver called the mixer. The mixer is a critical component in the RF systems, because of its ability for frequency conversion. This passage focuses on the design analysis and simulation of multiple topologies for the active down-conversion mixer. This mixer is …
-
High performance radio-frequency and millimeter-wave front-end integrated circuits design in silicon-based technologies
… building blocks such as a low-noise amplifier, a down-conversion mixer, and a passive balun were implemented using SiGe technology for W-band applications.
-
Interference cancellation in broadband wireless systems utilizing phase aligned injection-locked oscillators
… with the system to emulate the input stage of a down-conversion mixer and the cascaded P1dB was improved over 16dB with cancellation on. Gain compression above 13dB was also observed when auxiliary path was disabled, at the same input level as the P1dB with cancellation applied.
-
Inversion-based output tracking control and learning control for nonminimum phase systems and RF CMOS LNA and mixer design
… part of the thesis focuses on RF CMOS LNA and mixer design.;The nonminimum phase property has long been recognized as a major obstacle in many control problems. In part one, we introduce a new design procedure for output tracking control of nonminimum phase systems. We provide a causal …
-
Resonant Tunnelling Diodes for Millimetre and Sub-Millimetre Wave Mixing Applications
… was to evaluate a topology for a sub-harmonic down conversion mixer exploiting the fourth harmonic of a LO signal. Designs were evaluated by simulation at 640GHz and 320GHz with the aim of exploring the potential of a RTD based down-converter at 640GHz, in the 580-750GHz atmospheric window, …
-
Low Power Merged LNA and Mixer Design for Medical Implant Communication Services
… investigates low-power design of an LNA and a down-conversion mixer of a receiver for MICS applications. The key idea is to stack an LNA and a mixer, while the LNA operates in the normal super-threshold region and the mixer in the sub-threshold region. In addition, a gm-boosting technique with …
-
Vertical InAs Nanowire Devices and RF Circuits
… in functionality has been facilitated by scaling down the dimensions of the most important electronic component in modern electronics: the Si-based MOSFET. By reducing the size of the device, more transistors per chip area is possible. Smaller MOSFETs are also faster and more energy-efficient. In …
-
Design of Low-Voltage and Low-Distortion CMOS RF Integrated Circuits Using Volterra Analysis
… low-power single-balanced $\times$2 subharmonic down-conversion mixer. A linearity analysis for the inductive source degenerated transconductor of the mixer is provided using Volterra series. This analysis provides a guideline for designing the inductive source degenerated transconductor with …
-
Low-Power RF Front-End Design for Wireless Body Area Networks
… on our study, we proposed to adopt a direct conversion transmitter and a low-IF receiver architecture for the RF front-end. An asynchronous wake-up receiver was also proposed, which is composed of a carrier sensing circuit and a serial code detector. Third, we proposed and implemented …
-
Wireless Synchronization and Spatial Combining of Widely-spaced mm-wave Arrays in Silicon
… and power amplifier, a multi-stage LNA, and down-conversion mixer all in a 2mm2-size chip area. Time-domain transceiver operation is successfully measured with a 1-nS pulse width. This is the first demonstration of a fully-integrated, time-domain mm-wave EPR transceiver in silicon. Next, we …
-
Reconfigurable Mixer Design for Software-Defined Radios
… third-order intercept point (IIP3), and good conversion gain (CG) while maintaining a low noise figure (NF). However, the existing architectures cannot maintain good trade-offs among these performance parameters and doesn’t have wide tuning range. Despite the rapid development of SDRs, it is …
-
Multi-band reconfigurable RFICs in Si-based technologies for a compact and adaptive RF front-end
… reconfigurable transceivers, a direct quadrature down-conversion mixer first receiver with active channel select filters has been designed. The receiver supports 200MHz instantaneous RF bandwidth and can be reconfigured to receive any 200 MHz channel within 18-50 GHz frequency range. With the …
-
Design and Analysis of Low-power Millimeter-Wave SiGe BiCMOS Circuits with Application to Network Measurement Systems
… detail, including low-noise amplifiers (LNAs), down-conversion mixers, and various frequency multipliers covering a wide frequency range from V-band (50-75 GHz) to G-band (140-220 GHz). • Aiming at realizing a better trade-off between Pdc and RF performance, a drastic decrease in supply voltage …
-
Analysis and Design of Silicon based Integrated Circuits for Radio Frequency Identification and Ranging Systems at 24GHz and 60GHz Frequency Bands
… QC. The received signal is then amplified and downconverted for further processing. To prove this concept, two optimized QC ICs and a downconversion mixer IC are designed in a 22nm fully depleted SOI technology. The first QC is the transmission lines based QC which consumes a power of 5.4mW, …
-
Harmonic rejection mixers for wideband receivers
… presents novel Harmonic Rejection (HR) Mixer architectures to obtain a high level of harmonic rejection. This is achieved by reducing the sensitivity to mismatches in devices operating at high frequencies. Consequently, the HR performance for this mixer architecture is primarily …