Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 25 for “"Drawbar Pull"”.
-
Prediction of Tractor Drawbar Pull on Agricultural Soils
A new method of predicting the drawbar pull developed by agricultural tractors was designed and evaluated. A single wheel tester, similar to a rear tire of a tractor, was used to establish topsoil traction conditions by loading it with known loads and measuring the maximum transferable torque. This …
-
Experimental Analysis of the Effects of the Variation of Drawbar Pull Test Parameters for Exploration Vehicles on GRC-1 Lunar Soil Simulant
A drawbar pull (DP) test procedure was developed at the NASA Glenn Research Center (GRC) for testing and developing designs for off-road vehicles. The motivation was to develop a procedure that would produce repeatable results and could be replicated by other researchers. While developing the test …
-
Experimental Evaluation and Semi-Empirical Modeling of the Tractive Performance of Rigid and Flexible Wheels on Lunar Soil Simulant
… contact length. For each test the normal load, drawbar pull, and driving torque were measured and recorded for further analysis. To measure the effect of the changes in the wheels' parameters on the contact patch under different loads, a pressure pad was embedded below the surface of the Lunar …
-
Tractive performance of high-horsepower wheeled tractors with low tire inflation pressures
… the minimum and the maximum of ballast. The drawbar pull produced by the tractor was measured by a drawbar pin load cell, while the axle torques were measured by means of strain gauges on their output shafts (bar axle), the tire deflections were measured by ultrasonic distance sensors mounted …
-
An instrumentation system for measuring tractor field performance
… fuel flow, travel speed, wheel rotational speed, drawbar pull, and rear axle torque. The data acquisition system included an interface board, an AIM 65 microcomputer and a digital cassette recorder (Techtran 817). The microcomputer program was developed with an assembly language so that the system …
-
Determining the effects of tire pressure and soil condition on the Brixius equations for predicting net tractive force
… soil condition, and ballasting. The actual drawbar pull produced by the tractor was measured by a load cell, while the deflection of the tire was found by ultrasonic distance sensors mounted inside the rim of the driving tires. A separate tractor was used to load the test tractor, which …
-
Empirical Analysis of Pneumatic Tire Friction on Ice
… on a tire, providing directly the data for the drawbar pull of said tire, thus supporting the calculation of friction based on this data. This indoor testing apparatus allows for some degree of replication by helping to maintain test conditions and by imposing a desired tire slip; the normal …
-
Experimental Investigation of the Tractive Performance of an Instrumented Off Road Tire in a Soft Soil Terrain
… data to analyze several relations, such as the drawbar pull and the sinkage dependency on slip. The data col-lected indicated that, when looking at the effect of individual parameters, by increasing the soil com-paction, the normal load, and by decreasing the inflation pressure will result in a …
-
Tractive performance of integrated steering-drive systems
… input and power output to produce values for drawbar efficiency. theoretical analysis was conducted into the optimal slip conditions for maximum tractive efficiency. The analysis was conducted using a more rigorous mathematical analysis than previous researchers and used a thorough graphical …
-
Experimental Validation of Non-cohesive Soil Using Discrete Element Method
… penetroplate pressure-sinkage test; and wheel drawbar pull-torque-slip test. The test results are used to calibrate the material properties of the DEM soft soil model and validate the coupled MBD-DEM code. All three tests are important because each test measures specific mechanical …
-
Development, Design and Testing of an Electric Chore Loader
… most efficiently during light (less than 7.5 kN) drawbar pull applications. This indicated that this vehicle was best sui ted for light load applications.
-
Comparative Study of the Effect of Tread Rubber Compound on Tire Performance on Ice
… the effects of the tread rubber compound on the drawbar pull performance of tires in contact with an ice layer near its melting point. A set of sixteen tires of eight different rubber compounds were considered. The tires were identical in design and tread patterns but have different tread rubber …
-
Terrain and Vehicle-Terrain Sensing and Estimation in Real-Time for Use in Autonomous Vehicles
… angle can then be used to further obtain the drawbar pull and the tractive effort. The cameras were experimentally tested and validated using the Terramechanics testing rig at the TMVS laboratory at Virgina Tech. Both single pass and multi-pass scenarios were tested and the results analyzed. …
-
Finite Element Modeling and Experimental Validation for Off-Road Tire Performance
… pressure, and longitudinal velocity for drawbar pull coefficient. Several additional parameters showed strong trends in the signal-to-noise analysis despite lacking statistical significance, indicating areas for future investigation. These findings provide a foundation for improved …
-
Prediction of mobility, handling, and tractive efficiency of wheeled off-road vehicles
… and predicts basic features, such as the drawbar pull, the driving torque and the lateral force, as well as complex behaviors, such as the slip-sinkage phenomenon and the multi-pass effect. The tractive efficiency of different tire-soil configurations is simulated and discussed. To …
-
Multi-speed electric hub drive wheel design
… maximum speed, gradeability, acceleration, and drawbar pull. A proposed parametric drive wheel design is presented to meet the requirements of a generic heavy vehicle. The design demonstrates the feasibility of actuator technology that can be used to increase the performance, maintainability, …
-
Terramechanics of Saturated Clays: Assessing Tire Performance Through Experimental and Numerical Approaches
… tools capable of accurately predicting drawbar performance and sinkage are useful for path prediction and navigation without the loss of mobility. This thesis focuses on formulating the physics underlying such predictive tools, particularly in the challenging terrain of saturated clays. …
-
Tractor instrumentation for monitoring energy inputs to implements
… slip, fuel consumption per unit time and area, drawbar horsepower, axle horsepower, tractive efficiency, and implement energy requirement per unit area could be subsequently computed from these measurements.</p> <p>The data acquisition system was installed on a 2675 Massey- Ferguson (two-wheel …
-
Instrumentation, Sensing, and Off-Road Vehicle Performance Modeling; Integrating Classical Terramechanics and Machine Learning
… and contact geometry feeds into a semi-empirical drawbar pull framework that partitions traction forces into shear, normal resistance, bulldozing, and lug effects with uncertainty quantification throughout. This progression from sensing contact conditions, to estimating distributed forces, to …
-
A Volumetric Contact Model for Planetary Rover Wheel/Soil Interaction
… to be obtained experimentally. The results of a drawbar pull experiment with the Juno rover from the Canadian Space Agency were used to identify the soil parameters. These parameters were then used in a forward dynamics simulation of the rover on an irregular 3-dimensional terrain. Comparison of …
Page 1 of 2