Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 23 for “"DrivAer"”.

  1. Steady and Unsteady Numerical Analysis of the DrivAer Model

    … of steady and unsteady numerical analysis of the DrivAer vehicle model. The CAD model is free for anyone to use and is setting the new standard for benchmarking numerical analysis against experimental data in academia and industry. The model consists of a standardised car with interchangeable rear …

    chalmers Repository record for Steady and Unsteady Numerical Analysis of the DrivAer Model (opens in a new tab)

  2. Analýza zařízení pro redukci odporu automobilu založeného na aktivním řízení proudu

    … implementovaná na realistickom modeli vozidla DrivAer vo verzii kombi. Pri citlivostnej analýze Ahmed body bolo dosiahnuté maximálne zníženie aerodynamického odporu o takmer 12%. Po zohľadnení energetickej účinnosti systému aktívnej kontroly prúdu sa zistilo, že najpriaznivejším prípadom je …

    brno-tech Repository record for Analýza zařízení pro redukci odporu automobilu založeného na aktivním řízení proudu (opens in a new tab)

  3. External aerodynamic optimization of ground vehicles using the adjoint method

    … a primal solver setup was validated on the DrivAer model by comparison of well-studied experimental force coefficients, pressure coefficients, as well as velocity and wall shear stress fields. The adjoint solver was investigated further on the DrivAer model by a parametric study of various …

    chalmers Repository record for External aerodynamic optimization of ground vehicles using the adjoint method (opens in a new tab)

  4. Analýza vlivu rotace kola na aerodynamické vlastnosti vozidla

    … pro tři typy variabilní karoserie zádi vozidla DrivAer. Je zde provedena kompletní analýza a zhodnocení vlivů daných činitelů.

    brno-tech Repository record for Analýza vlivu rotace kola na aerodynamické vlastnosti vozidla (opens in a new tab)

  5. Vliv zadní části karoserie na aerodynamickou interakci vozidel

    … jízdy skupiny dvou za sebou jedoucích vozidel DrivAer v různých karosářských variantách. Pro karosářské varianty Estateback, Fastback a Notchback jsou vytvořeny CFD modely, které jsou následně řešeny pomocí turbulentního modelu k-epsilon. Cílem práce je analýza vlivu zadní části karoserie vozů …

    brno-tech Repository record for Vliv zadní části karoserie na aerodynamickou interakci vozidel (opens in a new tab)

  6. Vliv tlakové ztráty chladiče vozidla na jeho aerodynamický odpor

    … zameriava na numerickú simuláciu modelov vozidla DrivAer s rôznymi tlakovými stratami chladiča. Pre jednotlivé typy chladičov sú vytvorené CFD modely vozidla v karosárskej verzií Estate, spolu s chladičom a zjednodušeným motorovým priestorom. Cieľom práce je porovnanie vlastností konvenčného …

    brno-tech Repository record for Vliv tlakové ztráty chladiče vozidla na jeho aerodynamický odpor (opens in a new tab)

  7. Aerodynamics Around Wheels and Wheelhouses

    … and range increase and finally a CFD study of DrivAer with implementing features/improvements.

    chalmers Repository record for Aerodynamics Around Wheels and Wheelhouses (opens in a new tab)

  8. Adjoint-based Sensitivity Analysis for External Aerodynamics

    … with a high number of design variables. The DrivAer model with three con gurations is used in both RANS-based and DDES-based adjoint simulations. The convergence of the adjoint eld is assessed by monitoring di erent probes with respect to the sensitivity parameter. The comparison of the …

    chalmers Repository record for Adjoint-based Sensitivity Analysis for External Aerodynamics (opens in a new tab)

  9. Aerodynamiska krafter vid hård inbromsning - Numerisk beräkning av luftmotståndskoefficient på en personbil vid hård inbromsning med två olika accelerationsmodeller

    … av Computational Fluid Dynamics (CFD) och en DrivAer-modell för att ge approximativa numeriska resultat. Simuleringarna visade att vid hård inbromsning påverkar vaken en personbil med en kraft i samma storleksordning som luftmotståndet på bilens framsida. Det visades även att vaken välter över …

    chalmers Repository record for Aerodynamiska krafter vid hård inbromsning - Numerisk beräkning av luftmotståndskoefficient på en personbil vid hård inbromsning med två olika accelerationsmodeller (opens in a new tab)

  10. Aeroacoustic sound sources around the wheels of a passenger car - A Computational Fluid Dynamics study using steady state models to evaluate main sources of flow noise

    … quadrupoles within the ow around the wheels of a DrivAer car model. The methods used are the Curle acoustic analogy, to approximate the dipole sources at the surface, Proudman acoustic analogy, to approximate the quadrupoles generated in the turbulent ow and the Lilley method, approximates the …

    chalmers Repository record for Aeroacoustic sound sources around the wheels of a passenger car - A Computational Fluid Dynamics study using steady state models to evaluate main sources of flow noise (opens in a new tab)

  11. Numerisk beräkning av luftmotstånd på en personbil vid kurvtagning

    … Fluid Dynamics (CFD) och fordonsmodellen DrivAer, simulera och studera skillnaden mellan tre olika strömningsfall: körning på raksträcka, snedställning och kurvtagning. Resultatet visar att luftmotståndet ökar vid kurvtagning jämfört med snedställning och att sidkraften riktas inåt kurvan, …

    chalmers Repository record for Numerisk beräkning av luftmotstånd på en personbil vid kurvtagning (opens in a new tab)

  12. Aerodynamic investigation of a vehicle in highly turbulent flow

    … scale distributions, and aerodynamic loads on a DrivAer reference model. The design was optimized to ensure turbulence generation across the test section while keeping the required mechanical power within feasible limits. A mechanical system driven via a single motor through a chain was designed …

    chalmers Repository record for Aerodynamic investigation of a vehicle in highly turbulent flow (opens in a new tab)

  13. CFD Study of Optimal Under-hood Flow for Thermal Management of Electric Vehicles

    … CFD simulations. The geometry of the open grille DrivAer Model have been used to a large extent in this work, including a simplified electric powertrain and an alternative cooling module. For this work, a Reynolds-Averaged Navier-Stokes (RANS) method utilizing the k-" turbulence model have been …

    chalmers Repository record for CFD Study of Optimal Under-hood Flow for Thermal Management of Electric Vehicles (opens in a new tab)

  14. Development and Analysis of a Full Vehicle CFD Dataset for Rim Aerodynamics

    … rim designs. This thesis develops and analyses DrivAerRim to examine these effects and provide data for future geometric deep learning surrogates. The dataset contains full vehicle simulations for all 904 three dimensional Deep- Wheel rims on a common DrivAer estateback. Vehicle geometry and …

    chalmers Repository record for Development and Analysis of a Full Vehicle CFD Dataset for Rim Aerodynamics (opens in a new tab)

  15. Strategier för aerodynamisk formoptimering av bakvingen på en generisk tävlingsbil

    … på den inom forskning väl använda DrivAer-modellen, för att optimera position och attackvinkel på en bakvinge. De optimeringsmetoder som undersökts i projektet är surrogatmodellering, genetiska algoritmer och gradientbaserad formoptimering av adjointa fält. Surrogatmodellen …

    chalmers Repository record for Strategier för aerodynamisk formoptimering av bakvingen på en generisk tävlingsbil (opens in a new tab)

  16. Numerical simulations on passenger vehicles equipped with a cover under transportation

    … The study is performed on the generic model DrivAer, which is an open source model especifically created for aerodynamic studies. The process consists in simulating three different cases on which a variation on the cover geometry is applied, starting from the car model itself and applying …

    chalmers Repository record for Numerical simulations on passenger vehicles equipped with a cover under transportation (opens in a new tab)

  17. CFD Modeling of Wading with Electric Vehicles. Development of a Simulation Method Using OpenFOAM.

    … CFD software OpenFOAM is developed. The generic DrivAer model is used, modified to resemble a model of a battery electric vehicle (BEV). The computer aided engineering (CAE) software ANSA is used for geometry cleanup and hexahedral volume meshing. The numerical method uses the volume of uids …

    chalmers Repository record for CFD Modeling of Wading with Electric Vehicles. Development of a Simulation Method Using OpenFOAM. (opens in a new tab)

  18. Active Drag Reduction of Ground Vehicles Using Air-Jet Wheel Deflectors

    … wheel defectors were then simulated on the DrivAer reference model -- an open source model which blends features of the Audi A4 and the BMW 3 Series. The air jets were found to be less impactful at low speeds, but at higher speeds, they were observed to reduce wheel drag and cause an overall …

    embry-riddle Repository record for Active Drag Reduction of Ground Vehicles Using Air-Jet Wheel Deflectors (opens in a new tab)

  19. Continuous adjoint for aerodynamic and aeroacoustic shape optimization and robust design: applications to external flow problems, including wind turbines

    … performed for airfoils, the MEXICO WT, and the DrivAer car model, aiming to minimize acoustic sources at the trailing edge, blade, and side mirror, respectively. The broadband noise generated by a trailing edge airfoil, computed by the Proudman’s formula and specific spectral properties, is …

    greece Repository record for Continuous adjoint for aerodynamic and aeroacoustic shape optimization and robust design: applications to external flow problems, including wind turbines (opens in a new tab)

  20. A hybrid method for shape and topology optimization in fluid mechanics

    … maps are computed over the Ahmedbody and the DrivAer car geometries using the blocksolver and segregated approach. It is shown that the blocksolver provides orders of magnitude better performance against the segregated approach in both cases.The effectiveness of the new hybrid method and other …

    greece Repository record for A hybrid method for shape and topology optimization in fluid mechanics (opens in a new tab)

Page 1 of 2