Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 81 for “"Drop Tests"”.
-
FINITE ELEMENT ANALYSIS OF CNG TANK DROP TESTS
… CNG tank, with improved storage availability. Drop tests were conducted on these CNG tanks at the REL facility. The tanks were dropped from 1.83 meters (6 feet) height above ground, while maintaining different positions. The primary objective of these tests was to evaluate the damage resistance …
-
An Experimental Study in the Hydroelastic Response of an Aluminum Wedge in Drop Tests
… response due to a slamming event, wedge drop experiments were performed with an aluminum wedge of 57 inches in length, 47 inches in breadth, and 20 degree deadrise with 1/4 in. thick unstiffened bottom panels. The elastic behavior of the hull plating was measured via two methods. The …
-
A Detailed Dynamic Damage Investigation of a Large Passenger Aircraft Fuselage Section Subject to Emergency Landing Requirements
… that can effectively be used for performing drop tests through simulations. In order to establish the study, preliminary studies are performed on small scale models to validate the technique being used for fuselage section drop tests. Following this, a model of a B-737-200 fuselage is …
-
Experimental and numerical investigation of slamming loads on high-speed craft including hydroelastic effects
… using numerical simulations and full-scale tests. The aim of this work is to improve the safety and efficiency of high-speed craft structural designs for realistic operational loads.<br/>A numerical model for simulating the water impact of two- and three-dimensional rigid and flexible …
-
A Computer Procedure for the Identification of Beam, Spring, and Damping Parameters of an N-Mass Model Using Transient Data
… acceleration data such as that obtained from drop tests or shaker tests, the task of identification is greatly simplified.
-
Correlating wettability alteration with changes in gas permeability in gas condensate reservoirs
… permeabilities. Stability/compatibility test, drop tests and X-ray photoelectron spectroscopy (XPS) analysis along with core flood results were used to characterize wettability changes. XPS tests, drop tests, and relative permeability measurements were conducted and correlated with each other. …
-
The vibrations of a flexible planing craft: hydroelasticity, boat motion and noise
… aspect at a time. The four stages were: static tests, flat water trials, drop tests and wave trials. The D-class was fitted with 52 sensors to measure the boat motion, engine thrust, sponson and keel pressures, deck hinge angles, deck panel deflections and the fabric hull deformation. The static …
-
The Application of Flexible Structures into Carrier-Based Aircraft to Dissipate Landing Energies
… this idea, starting with an elementary set of tests, looking into material flexibility, and then moving on to adding this concept to progressively more advanced structural systems. Using balls of varying material, preliminary drop tests indicated that material flexibility could assist the …
-
Drop Test Simulation of a Conformable CNG Tank by Finite Element Analysis using ANSYS
… (Natural Gas Vehicle) safety standards. Physical drop tests have shown satisfactory results with NGV2 drop test criteria. These tests simulated in HyperMesh/RADIOSS by Sumit Bongir and in Abaqus by Paul Roehm have shown little discrepancies in results compared with physical test results. This …
-
Reliability quantification of plates subjected to random vibration and temperature loads
… latent defects during development. In addition, drop tests are also necessary for these products since an accidental drop may seriously damage them. Both random vibration and drop tests are expensive. Plate element is popular in portable and transportation related products, for example, the …
-
Drag of spheres in dilute aqueous solutions of poly(ethylene oxide) within the region of the critical Reynolds number
… and supercritical Reynolds number regions. Drop tests were conducted in water and in concentrations of poly(ethylene oxide) WSR 301 ranging in concentration from 50 wppm to 1000 wppm. Reduction in drag was noted for all concentrations in the Reynolds number range of 4 x 104 to s.5 x 105. A …
-
Transient Finite Element Analysis of A Base Excited Frame on A Six DOF Motion Simulator to Simulate Wave Slamming
… of additional weight. A series of 15 single-axis drop tests are conducted with the DOF motion simulator to study the effects of these impact loads on the onboard equipment. The test data is analyzed to characterize the response produced by the 6 DOF machine and its effect on the test frame. A …
-
Electrical, thermomechanical and reliability modeling of electrically conductive adhesives
… to fatigue loading, moisture conditioning and drop impacts. In fatigue tests it is found that electrical conduction failure occurs prior to mechanical failure. The experimental data show that electrical fatigue life can be described well by the power law equation. The electrical failure of …
-
MEASUREMENT OF CATALYST LAYER WETTABILITY IN PROTON EXCHANGE MEMBRANE FUEL CELL
… Contact angle was also measured by sessile drop method where effect change in heating duration was observed. Sessile drop tests were also used to observe effect of water absorption of catalyst layer with respect to time as depicted by drop reduction and change in contact angle.
-
Development of a particle breakage model for implementation in the discrete element method
… EDEM. In order to validate the model, data from drop weight tests on particles as well as drop tests are compared to simulations, demonstrating good agreement.
-
Validation of Seaplane Impact Load Theory and Structural Analysis of the Martin 270
Flight and drop tests of the Martin 270 (M270) seaplane were conducted in 1955. Theoretical and empirical pressures were determined by use of Wagner’s theory and also by the Code of Federal Regulations (CFR). The pressure results from the experimental tests on the hull were compared with pressures …
-
Assessing Non-Planar Slicing and Carbon Fibre Filament Additives as Steps Towards 3D-Printed Drone Propellers
… of carbon-fibre additives were detected. Drop tests assessed impact behaviour, finding no link between material or slicing style and performance for a realistic propeller geometry. Simpler geometry resulted in both factors affecting performance, indicating possible benefits when applied in …
Page 1 of 5