Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 110 for “"Drop Tower"”.

  1. Development of a Converging-Channel Drop Tower For Sphere Symmetric Isolated Single Droplet Combustion

    … the literature. A low-cost converging-channel drop tower was designed and fabricated for sphero-symmetric single droplet combustion of n-alkane fuels to be comparable to that in the literature. A piezoelectric actuated droplet generator was created to control droplet size as they fell through a …

    south-carolina Repository record for Development of a Converging-Channel Drop Tower For Sphere Symmetric Isolated Single Droplet Combustion (opens in a new tab)

  2. Measuring the Effect of Concentrate Mineralogy on Flash Furnace Smelting Using Drop Tower Testing and a Novel Optical Probe

    … flash combustion reactions was done. A drop tower reactor was used to study the effect of O2/S stoichiometry on flash combustion processes under 21 different test conditions. Tests were conducted at 950oC with O2/S stoichiometries in the range of 0.8 to 4.0, and a solids feed rate of 3 …

    queens Repository record for Measuring the Effect of Concentrate Mineralogy on Flash Furnace Smelting Using Drop Tower Testing and a Novel Optical Probe (opens in a new tab)

  3. Ignition delay of oxygenated fuel droplets: development of a 1 second drop tower and initial 1-g test results

    … butyrate combustion. In the present study, droplet ignition delay times of methyl butyrate and methanol are investigated. A bench experiment, conducted in normal gravity, was constructed and used to determine the ignition delay times of each fuel. Normal gravity experiments were conducted on …

    rowan Repository record for Ignition delay of oxygenated fuel droplets: development of a 1 second drop tower and initial 1-g test results (opens in a new tab)

  4. Rheological Damper Characterization and Control with Application to a Drop Tower for Replicating the Impact Profiles of High Speed Craft

    … proposes using a rheological damper as the drop tower impact surface, leveraging its semi-active behaviour. For such application, several preparatory steps are necessary. Therefore, the scope of this work includes damper characterization, inverse model development, impact dynamics …

    carleton Repository record for Rheological Damper Characterization and Control with Application to a Drop Tower for Replicating the Impact Profiles of High Speed Craft (opens in a new tab)

  5. Investigation of the Feasibility of Deploying Electro-rheological Dampers in a Drop Tower to Replicate the Impact Profiles of High Speed Craft

    … the effect of system parameters of the drop tower to obtain the HSC impact profiles. Next, the ER dampers were characterized at high velocities which involved dynamic testing using a drop tower apparatus and identifying the parameters of a Bingham plastic model to represent the …

    carleton Repository record for Investigation of the Feasibility of Deploying Electro-rheological Dampers in a Drop Tower to Replicate the Impact Profiles of High Speed Craft (opens in a new tab)

  6. A Laboratory Study on the Influence of Guided Drop Tower Carriage Mass and Kinematic Differences to Full-Surrogate Free Falls Toward Enhanced Helmet Certification Methods

    … for helmet impact testing. Guided vertical drop towers are a test device commonly used to evaluate the impact attenuating properties of protective headgear in headfirst falls during certification testing. These devices provide a simple, low cost, repeatable means for conducting certification …

    uvic Repository record for A Laboratory Study on the Influence of Guided Drop Tower Carriage Mass and Kinematic Differences to Full-Surrogate Free Falls Toward Enhanced Helmet Certification Methods (opens in a new tab)

  7. Physical Testing of Potential Football Helmet Design Enhancements

    … required. In order to carry out this testing a drop tower was built based on National Operating Committee on Standards for Athletic Equipment, NOCSAE, specification. The drop tower designed for Cal Poly is a lower cost and highly portable version of the standard NOCSAE design. Using this drop …

    calpoly Repository record for Physical Testing of Potential Football Helmet Design Enhancements (opens in a new tab)

  8. Experimental study of elasto-plastic wave propagation in one-dimensional and two-dimensional disk arrays

    In this work, a drop-weight tower setup and a modified split Hopkinson pressure bar (SHPB) are used to dynamically load one- (1D) and two-dimensional (2D) arrays of disks in contact. The disks are made of aluminum 6061 T6 and are selected because of their rate-independence, thus allowing static …

    uiuc Repository record for Experimental study of elasto-plastic wave propagation in one-dimensional and two-dimensional disk arrays (opens in a new tab)

  9. Development of the West Virginia University Small Microgravity Research Facility (WVU SMiRF)

    … the Small Microgravity Research Facility (SMiRF) drop tower through a WVU Research Corporation Program to Stimulate Competitive Research (PSCoR) grant on its campus to increase direct access to inexpensive and repeatable reduced gravity research. In short, a drop tower is a tall structure from …

    wvu Repository record for Development of the West Virginia University Small Microgravity Research Facility (WVU SMiRF) (opens in a new tab)

  10. The Effect of Viscosity on The Puddle Dynamics in Low Gravity Environment

    … nearly step-reduction in body force common to drop tower test facilities. The phenomenon is similar to the second half of terrestrial drop bounce experiments except that (1) the initial static equilibrium configuration satisfies the static contact angle condition, (2) the initial height of the …

    portland-state Repository record for The Effect of Viscosity on The Puddle Dynamics in Low Gravity Environment (opens in a new tab)

  11. Large Length Scale Droplet Capillary Phenomena: Generation, Jump, and Capture

    Understanding the life cycle of droplets, from generation to capture, for example, is critical to understanding environments from the air-sea interface to the indoor environment of the International Space Station. Investigations have been performed in this work to provide insight into three droplet …

    portland-state Repository record for Large Length Scale Droplet Capillary Phenomena: Generation, Jump, and Capture (opens in a new tab)

  12. Construction of a Hele-Shaw combustion apparatus and examination of low-flow near-extinction regime using high speed videography

    … (ATHINA) initiative. The facility has a drop tower, which can be used to demonstrate flame propagation in free-fall, but the drop tests are expensive and limited to the two to five second duration of the free-fall. To simulate a microgravity environment without using the drop tower, thus …

    msu Repository record for Construction of a Hele-Shaw combustion apparatus and examination of low-flow near-extinction regime using high speed videography (opens in a new tab)

  13. Large Length Scale Capillary Fluidics: From Jumping Bubbles to Drinking in Space

    … fluid management design is low indeed. Low-cost drop towers and fast-to-flight International Space Station (ISS) experiments are increasing designer exposure to this fresh field of study. This work first provides a wide variety of drop tower tests that demonstrate fundamental and applied …

    portland-state Repository record for Large Length Scale Capillary Fluidics: From Jumping Bubbles to Drinking in Space (opens in a new tab)

  14. Capillarity-Driven Droplet Ejection

    Drop Towers provide brief terrestrial access to microgravity environments. When used for capillary fluidics research, a drop tower allows for unique control over an experiment's initial conditions, which enables, enhances, or otherwise improves the study of capillary phenomena at significantly …

    portland-state Repository record for Capillarity-Driven Droplet Ejection (opens in a new tab)

  15. Experimental Snap Loading of Synthetic Fiber Ropes

    … synthetic fiber ropes. An eleven-foot-tall drop tower was built in the Virginia Tech Structures and Materials Laboratory in order to conduct these tests. Force and acceleration of the drop plate, which slides vertically within the drop tower, were measured with respect to time for all …

    vt Repository record for Experimental Snap Loading of Synthetic Fiber Ropes (opens in a new tab)

  16. A simple approach to viscoelastic material selection for impact absorption

    … parameters and the Ashby performance metric. Drop tower validation experiments are then conducted to compare the predicted acceleration values based on the impact model to actual impacts. The predicted-to-actual peak acceleration ratio approaches unity with lower peak drop tower strains. The …

    ubc Repository record for A simple approach to viscoelastic material selection for impact absorption (opens in a new tab) Download PDF for A simple approach to viscoelastic material selection for impact absorption (opens in a new tab)

  17. Electro-Drop Bouncing in Low-Gravity

    … the dynamics of spontaneous jumps of water drops from electrically charged superhydrophobic dielectric substrates during a sudden step reduction in gravity level. In the brief free-fall environment of a drop tower, with a non-homogeneous external electric field arising due to dielectric …

    portland-state Repository record for Electro-Drop Bouncing in Low-Gravity (opens in a new tab)

  18. The Influence of Impact Mass, Inbound Velocity and System Compliance on the Dynamic Response of a Hybrid III Head Form

    … standards solely prescribe the use of vertical drop towers in their protocols; a mechanism which mimics the head impacting the ground. Athletes are more commonly injured via collisions with other players; however, and the current certification standards do not incorporate this mechanism of …

    ottawa-retro Repository record for The Influence of Impact Mass, Inbound Velocity and System Compliance on the Dynamic Response of a Hybrid III Head Form (opens in a new tab)

  19. Cloud stratification measurement of an electric particulate suspension for studies in gravity and microgravity

    … use in the NASA Glenn Research Center 2.2 second drop tower. This system is designed to compare differences in ground-based particulate suspensions with suspensions generated in microgravity. A photodiode array scanning system gives number density versus suspension height during a 2.2 second free …

    iastate Repository record for Cloud stratification measurement of an electric particulate suspension for studies in gravity and microgravity (opens in a new tab)

  20. Quenching of particle-gas combustible mixtures using the electric particulate suspension (EPS) method

    … NASA Glenn Research Center's (NGRC) 2.2-second drop tower showed higher powder concentrations in microgravity compared to suspensions formed in normal gravity. Powder concentration profiles were confirmed to be symmetric at 0 g and a near-constant value under certain conditions. Abnormal …

    iastate Repository record for Quenching of particle-gas combustible mixtures using the electric particulate suspension (EPS) method (opens in a new tab)

Page 1 of 6