Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 31 for “"Drop testing"”.

  1. Improving post-test data reduction and analysis for dynamic drop testing of store models

    <p>Dynamic Drop testing is a method of trajectory simulation whereby store models which are both geometrically and dynamically scaled are released in the wind tunnel air stream. The resulting trajectories are then mapped photographically onto film. Drop testing is often necessary when captive …

    ut-knoxville Repository record for Improving post-test data reduction and analysis for dynamic drop testing of store models (opens in a new tab)

  2. Multi-Scale Dynamic Study of Secondary Impact During Drop Testing of Surface Mount Packages

    … within hand-held electronics due to accidental drop or impact loading. The continuing increase of functionality, miniaturization and affordability has resulted in a decrease in the size and weight of handheld electronic products. As a result, PWAs have become thinner and the clearances between …

    maryland Repository record for Multi-Scale Dynamic Study of Secondary Impact During Drop Testing of Surface Mount Packages (opens in a new tab)

  3. Predicting Leakage from Nuclear Material Containers at Los Alamos National Laboratory Through Drop Testing, Leak Testing, Finite Element Analysis and Digital Image Correlation

    … These containers are subject to rigorous testing—such as drop, fire, and water ingress testing—to ensure integrity under adverse conditions. While elastomer-based seals are well studied, metal-to-metal sealing mechanisms remain under investigation, particularly under dynamic loading. This …

    unm Repository record for Predicting Leakage from Nuclear Material Containers at Los Alamos National Laboratory Through Drop Testing, Leak Testing, Finite Element Analysis and Digital Image Correlation (opens in a new tab)

  4. Joining Polycrystalline Cubic Boron Nitride and Tungsten Carbide by Partial Transient Liquid Phase Bonding

    … database of all existing binary systems, sessile drop testing of 20 elements, and a routine that calculates maximum interlayer thicknesses. Results of sessile drop testing showed that the PCBN grade required for this research could only be bonded with an alloy of Ti, Cu, Mg, and Sb. Two PTLP bond …

    byu Repository record for Joining Polycrystalline Cubic Boron Nitride and Tungsten Carbide by Partial Transient Liquid Phase Bonding (opens in a new tab) Download PDF for Joining Polycrystalline Cubic Boron Nitride and Tungsten Carbide by Partial Transient Liquid Phase Bonding (opens in a new tab)

  5. Reliability of high-density lead-free solder interconnections under thermal cycling and mechanical shock loading

    … in novel portable products. Thermal cycling and drop testing are commonly used because they reveal the failure modes and mechanisms that portable devices experience in operational environments. A large number of component boards were assembled in a full-scale production line to enable proper …

    aalto Repository record for Reliability of high-density lead-free solder interconnections under thermal cycling and mechanical shock loading (opens in a new tab)

  6. Validation of a Linear Rail Vertical-Drop Impact Test System

    … investigated an optional linear rail vertical-drop impact test system (VDlTS). The study reviews present athletic helmet testing methods and parameters used to identify system response of a vertical drop testing apparatus. The study's primary objective was to validate the VDITS, through the …

    marquette Repository record for Validation of a Linear Rail Vertical-Drop Impact Test System (opens in a new tab)

  7. Dust Susceptibility at Mine Tailings Impoundments: Thermal Remote Sensing for Dust Susceptibility Characterization and Biological Soil Crusts for Dust Susceptibility Reduction

    … mine tailings and used (1) laboratory and field testing to assess the utility of thermal remote sensing techniques for dust monitoring, and (2) laboratory testing to assess the ability of biological soil crusts to reduce dust emissions due to cold weather dusting. A laboratory model was developed …

    mtu Repository record for Dust Susceptibility at Mine Tailings Impoundments: Thermal Remote Sensing for Dust Susceptibility Characterization and Biological Soil Crusts for Dust Susceptibility Reduction (opens in a new tab)

  8. Impact Analysis on Silicone Breast Implants Using In Vitro Experiments and Finite Element Analysis

    … differences influence implant behavior, in vitro drop testing and finite element analysis (FEA) simulations were conducted, focusing on impact forces, internal stresses, and deformation patterns experienced by the implants. Compression and tensile testing of implants and their components were done …

    gvsu Repository record for Impact Analysis on Silicone Breast Implants Using In Vitro Experiments and Finite Element Analysis (opens in a new tab)

  9. DROP DURABILITY ASSESSMENT OF ELECTRONIC ASSEMBLIES UNDER OFF-AXIS LOADING WITH SKEWED FIXTURES

    This thesis studies drop durability of electronic assemblies when the acceleration vector is oriented at 45° to the out-of-plane direction of the circuit card. The off-axis drop tests are accomplished with a skewed fixture and are conducted as a proxy for multiaxial drop testing. Advanced shock …

    maryland Repository record for DROP DURABILITY ASSESSMENT OF ELECTRONIC ASSEMBLIES UNDER OFF-AXIS LOADING WITH SKEWED FIXTURES (opens in a new tab)

  10. Minimizing Run Time of Finite Element Analyses: Applications in Conformable CNG Tank Modeling

    … and meet NGV2 safety standards for pressure and drop testing for this tank. The model has undulated outer surfaces and Schwarz P-surface internal geometry. To accurately mesh this, a small element size is necessary; this creates a model with millions of elements. In explicit analyses, this …

    mtu Repository record for Minimizing Run Time of Finite Element Analyses: Applications in Conformable CNG Tank Modeling (opens in a new tab)

  11. Experimental study of impact loading on negative stiffness structures

    This work outlines the design of a drop testing apparatus and the use of the apparatus to perform impact tests on negative stiffness honeycomb structures. Negative stiffness beams are non-linear spring elements that can be used to absorb energy. When prefabricated negative stiffness beams are …

    texas Repository record for Experimental study of impact loading on negative stiffness structures (opens in a new tab)

  12. An experimental facility for microchannel research and evaporating R134a in microchannel tube

    … design. Heat transfer coefficient and pressure drop are the two most important parameters to be measured in an experimental facility. A featured design of heat transfer behavior and pressure drop testing facility for both evaporating and condensing refrigerant in microchannel tubes are made and …

    uiuc Repository record for An experimental facility for microchannel research and evaporating R134a in microchannel tube (opens in a new tab)

  13. Dynamic Mechanical and Failure Properties of Solder Joints

    … portable electronics, solder joint failure under drop or shock conditions is becoming a critical issue. However, studies of solder joints under dynamic loading are limited, especially for lead-free solders. The objective of this study is to investigate the load-deformation response and failure …

    nus Repository record for Dynamic Mechanical and Failure Properties of Solder Joints (opens in a new tab) Download file for Dynamic Mechanical and Failure Properties of Solder Joints (opens in a new tab)

  14. Leak detection in power plant heat recovery steam generators utilizing medical radionuclides

    … which these leaks are detected rely on pressure drop testing: for power plants operating in today’s fast response market conditions a pressure drop test is not possible. The first evidence of a tube leak is usually associated with a catastrophic failure of a tube necessitating an unplanned plant …

    lancaster Download PDF for Leak detection in power plant heat recovery steam generators utilizing medical radionuclides (opens in a new tab)

  15. Strain Gauge Utilization for Aerial Vehicle Dynamic Load Measurement

    … traditionally requiring an extensive flight testing regimen. Numerical solution-based design is difficult due to the highly nonlinear deformation behavior of the parachute canopy. Traditionally, circular parachutes are assumed to have symmetric canopy loading upon inflation and during terminal …

    umkc Repository record for Strain Gauge Utilization for Aerial Vehicle Dynamic Load Measurement (opens in a new tab)

  16. An Investigation of The Skidding, Milling, and Sawing of High Explosives

    … chemical reactions. In this work, experimental testing is employed to assess the risks and heating trends under drop skidding, milling, and sawing conditions. Skidding experiments were performed over an IR transparent surface on a rotating disk in a novel approach to drop testing, allowing for …

    ttu Repository record for An Investigation of The Skidding, Milling, and Sawing of High Explosives (opens in a new tab)

  17. Vibration analysis of electroplated copper compliant interconnects

    … damage due to thermal and power cycles, drop impact shock, and various vibration loads during application. As traditional microelectronic packaging interconnects are rigid, compliant interconnects are being pursued to facilitate more independent deformation between the substrate and the …

    gatech Repository record for Vibration analysis of electroplated copper compliant interconnects (opens in a new tab)

  18. Response of multi-path compliant interconnects subjected to drop and impact loading

    … prototypes will be subjected to experimental drop testing. Accelerometers will be placed on the board, and strain gauges will be attached to the board and the die at various locations. The samples will be dropped from different heights to different shock levels in the components, according to …

    gatech Repository record for Response of multi-path compliant interconnects subjected to drop and impact loading (opens in a new tab)

  19. Development of dual-fiber array laser ultrasonic system for inspecting and assessing area-array microelectronic packages

    … after the assembly. Currently, both destructive testing, as well as non-destructive testing such as X-ray and acoustic microscopy, are being used to detect solder interconnection defects and failures. However, both destructive and non-destructive testing have significant limitations. Therefore, …

    gatech Repository record for Development of dual-fiber array laser ultrasonic system for inspecting and assessing area-array microelectronic packages (opens in a new tab)

  20. Energy Absorption and Progressive Failure Response of Composite Fuselage Frames

    Vertical drop testing of transport aircraft fuselage sections indicates that the frames play a major role in the process of absorbing the impact energy in the crushing of the substructure below the main passenger deck. Hence, static tests are performed on individual circumferential frames under a …

    vt Repository record for Energy Absorption and Progressive Failure Response of Composite Fuselage Frames (opens in a new tab)

Page 1 of 2