Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 75 for “"Drop-Weight Impact"”.

  1. Design, fabrication, and calibration of an instrumented drop weight impact tester

    … fabrication, and calibration of an instrumented drop weight impact tester is described. Included in this description are all the sketches and drawings that are needed to duplicate this project, if so desired. This impact tester was built for around $23,000 less than it would have cost to buy and …

    vt Repository record for Design, fabrication, and calibration of an instrumented drop weight impact tester (opens in a new tab)

  2. Computer simulation of drop weight impact tests on plastic parts or sheeting

    <p>The ASTM D3029 drop weight test on plasic parts or sheeting is simulated in this thesis. The simulation is accomplished by using the Bruceton staircase method or the Up-and-Down method and the normal distribution theory. The "Probit" method is also analyzed.</p><p>The simulation programs are …

    njit Repository record for Computer simulation of drop weight impact tests on plastic parts or sheeting (opens in a new tab)

  3. Reinforced Concrete Beams Subjected to Repeated Drop Weight Impact and Static Load

    … to single and repeated loading with different drop-weights of 10, 20 and 40 kg from a height of 5 meter. The beams also had different reinforcement diameters of 6, 8 and 10 mm to test how it affects the structural response. The dynamically tested beams were also tested statically to determine …

    chalmers Repository record for Reinforced Concrete Beams Subjected to Repeated Drop Weight Impact and Static Load (opens in a new tab)

  4. FRP Strengthened Concrete Beams Subjected to Drop Weight Impact and Static Loading

    … thesis is on the effect FRP strengthening has on impact loaded structures when it comes to deformation capacity, ultimate load capacity and energy absorption. A literature study was conducted regarding impulse loaded structures, FRP in general and FRP strengthening of RC structures in particular. …

    chalmers Repository record for FRP Strengthened Concrete Beams Subjected to Drop Weight Impact and Static Loading (opens in a new tab)

  5. FRP Strengthened RC Beams Subjected to Drop Weight Impact and Static Load - Experimental study for structural response

    … Reinforced Concrete (RC) beams subjected to impact loading by studying the response of deformation capacity and the energy absorption under impact loading. The remaining residual capacity is also of interest in this study which is established by static loading of impacted beams until failure …

    chalmers Repository record for FRP Strengthened RC Beams Subjected to Drop Weight Impact and Static Load - Experimental study for structural response (opens in a new tab)

  6. Dynamic fracture toughness of fiber reinforced concrete

    The technique of instrumented drop-weight impact testing is often adopted to perform impact tests on cement-based materials. However, to date, no uniformity in the testing methods exists, which makes it difficult to enable reasonable comparisons between data emerging from different laboratories. …

    ubc Repository record for Dynamic fracture toughness of fiber reinforced concrete (opens in a new tab) Download PDF for Dynamic fracture toughness of fiber reinforced concrete (opens in a new tab)

  7. Impact resistance of filled concrete box sections

    … of this research is to analyze the effects of drop-weight impact tests on filled concrete box sections. Research in other areas of soil filled container walls has proved favorable in blast loading environments suggesting a concrete system may also work well. In the experiment, thirty different …

    umn Repository record for Impact resistance of filled concrete box sections (opens in a new tab)

  8. Mechanical behaviour and deformation mechanisms of closed-cell foam structures

    … including quasi-static compression, drop-weight impact and plate-impact tests, and x-ray computed micro-tomography-based finite element modelling were conducted to achieve this goal. The results show that the heterogeneity of topology and variation of cell wall strength are the …

    unsw Repository record for Mechanical behaviour and deformation mechanisms of closed-cell foam structures (opens in a new tab)

  9. Nanoindentation of copper covetics and the mechanical testing and microstructural imaging of additive manufactured Inconel 718

    … as cast and have compositions of 0, 3, 5, and 9 weight percent activated carbon. Additionally, this study investigates the mechanical properties of some W-series copper-carbon composites. Four different compositions were compared: 0.83 weight percent activated carbon, 2 weight percent activated …

    uiuc Repository record for Nanoindentation of copper covetics and the mechanical testing and microstructural imaging of additive manufactured Inconel 718 (opens in a new tab)

  10. QUASI-STATIC AND IMPACT CHARATERIZATIONS OF STITCHED FLAX FIBER COMPOSITE

    … using natural fibers on the mechanical and impact properties of flax/epoxy composites. Flax and cotton fibers were used to stitch preforms of woven fabric and unidirectional laminates in various stitch densities. A virtual double-cantilever-beam test was developed to analyze delamination …

    nus Repository record for QUASI-STATIC AND IMPACT CHARATERIZATIONS OF STITCHED FLAX FIBER COMPOSITE (opens in a new tab) Download file for QUASI-STATIC AND IMPACT CHARATERIZATIONS OF STITCHED FLAX FIBER COMPOSITE (opens in a new tab)

  11. Impact Performance of Cement Composite Filled Pipe-In-Pipe Structures

    This study investigates the impact behavior of cement composite filled pipe-in-pipe structures through drop weight impact tests and numerical analyses. The composite pipes experience global deformations and local indentations under the transverse impact. Based on a combined experimental and …

    nus Repository record for Impact Performance of Cement Composite Filled Pipe-In-Pipe Structures (opens in a new tab) Download file for Impact Performance of Cement Composite Filled Pipe-In-Pipe Structures (opens in a new tab)

  12. Impact Behaviour of Aluminium Foam Sandwich Panels with Fibre Metal Laminate Skins

    … panels are of strong capability to resist impact and absorb energy since sandwich panels integrate the advantages of both Al foam core and the skin material. Though many researches on Al foam sandwich panels with metal skins or composite skins have been extensively reported, research on Al …

    unsw Repository record for Impact Behaviour of Aluminium Foam Sandwich Panels with Fibre Metal Laminate Skins (opens in a new tab)

  13. Impact performance of steel-concrete-steel sandwich structures

    The aim of this research is to assess the impact performance of Steel-Concrete-Steel (SCS) sandwich structures comprising a lightweight concrete core sandwiched in between two steel plates which are interconnected by J-hook connectors. Novel J-hook connectors that are capable of resisting tension …

    nus Repository record for Impact performance of steel-concrete-steel sandwich structures (opens in a new tab) Download file for Impact performance of steel-concrete-steel sandwich structures (opens in a new tab)

  14. Studies on comminution.

    … of the criterion thus obtained, the drop-weight impact test and ball mill grinding were carried out using the identical specimen used for tensile strength and Young's modulus test. The experimental result was obtained that the square of tensile strength is more applicable than the …

    ubc Repository record for Studies on comminution. (opens in a new tab) Download PDF for Studies on comminution. (opens in a new tab)

  15. Low-Velocity Impact, Vibration and Shock Response of Unstitched/Stitched E- And S- Glass/Vinyl Ester Composites

    … on the dynamic properties, low-velocity impact and shock responses of stitched and unstitched E- and S- Glass/Vinyl Ester composites have been investigated. The stiffness and loss factor (inherent damping) properties are obtained from impulse-frequency response experiments using the …

    mississippi Repository record for Low-Velocity Impact, Vibration and Shock Response of Unstitched/Stitched E- And S- Glass/Vinyl Ester Composites (opens in a new tab)

  16. Dynamic response of glass under low-velocity impact and high strain-rate compression loading

    … Silica were characterized using a Dynatup 8250 drop weight impact test system, and a modified Split Hopkinson Pressure Bar (SHPB). In the low-velocity punch-shear experiment, similar trend has been observed for all glass types, and Starphire and Borosilicate demonstrated the highest total energy …

    mississippi Repository record for Dynamic response of glass under low-velocity impact and high strain-rate compression loading (opens in a new tab)

Page 1 of 4