Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 80 for “"Drop-on-demand"”.

  1. Drop-on-Demand Inkjet Drop Formation and Deposition

    An imaging system was developed to visualize Drop-on-Demand (DOD) inkjet drop formation and impaction on substrate over drop sizes and impaction speeds of the magnitudes encountered in applications of inkjet printing. Using a pulsed laser, a low-speed charge-coupled-device (CCD) camera, and signal …

    gatech Repository record for Drop-on-Demand Inkjet Drop Formation and Deposition (opens in a new tab)

  2. Drop-on-demand printing of liquid crystals and composites

    <p>This thesis focuses on the development and investigation of drop-on-demand (DoD) printing of liquid crystal (LC) and polymer composites with a focus on the manufacture of new photonics technologies that encompass a range of length scales. Both inkjet and electrohydrodynamic printing are employed …

    oxford Repository record for Drop-on-demand printing of liquid crystals and composites (opens in a new tab)

  3. Layer-By-Layer Films via 3D Drop on Demand Printing

    The traditional method for making Layer-By-Layer films is a laborious, expensive, wasteful, and non-ecofriendly process; therefore this study was conducted to find a faster, more cost efficient, and non-wasteful method of producing ecofriendly Layer-By-Layer films which could potentially be used in …

    texas-state Repository record for Layer-By-Layer Films via 3D Drop on Demand Printing (opens in a new tab)

  4. Enhanced piezoelectric drop-on-demand cell dispensing through neutral buoyancy

    Micro dispensing of cell based suspensions offers enhanced precision and accuracy for a wide variety of applications including high throughput cell based assays, single cell analyses and tissue engineering. One technology that offers such promises is piezoelectric inkjet printing. However, the …

    ubc Repository record for Enhanced piezoelectric drop-on-demand cell dispensing through neutral buoyancy (opens in a new tab) Download PDF for Enhanced piezoelectric drop-on-demand cell dispensing through neutral buoyancy (opens in a new tab)

  5. Drop-on-demand inkjet drop formation of dilute polymer solutions

    The research discussed in this dissertation was conducted to understand drop formation of inkjet printing with inks containing polymer. Solutions containing a water soluble polymer, poly ethylene oxide (PEO), with different molecular weights and polydispersities were used as inks. A flash …

    gatech Repository record for Drop-on-demand inkjet drop formation of dilute polymer solutions (opens in a new tab)

  6. Drop-on-demand inkjet deposition of complex fluid on textiles

    … understanding of the process of deposition of complex mixtures by the inkjet method. The rheological properties and DOD drop formation dynamics of carbon black pigmented inkjet inks were investigated. It was found that the suspension microstructure responses to bulk motions, leading to …

    gatech Repository record for Drop-on-demand inkjet deposition of complex fluid on textiles (opens in a new tab)

  7. Deposition of functional biomedical coating via drop-on-demand micro-dispensing technique

    Silicon-substituted hydroxyapatite (SiHA) and silver-substituted hydroxyapatite (AgHA) have been shown to provide enhanced bioactivity and anti-bacterial properties over pure hydroxyapatite (HA), respectively. In this work, a dual-layer nanoSiHA-nanoAgHA/nanoHA (nSiHA-nAgHA/nHA) coating consisted …

    nus Repository record for Deposition of functional biomedical coating via drop-on-demand micro-dispensing technique (opens in a new tab) Download file for Deposition of functional biomedical coating via drop-on-demand micro-dispensing technique (opens in a new tab)

  8. The Generation And Experimental Study Of Microscale Droplets In Drop-On-Demand Inkjet Printing

    The thesis mainly contains following 3 parts. In the first part, a PET/PTFE-based piezoelectric drop-on-demand inkjet printhead with an interchangeable nozzle design was proposed and fabricated in this thesis. The ejecting capacity of this novel printhead was compared with commercial printheads, …

    nus Repository record for The Generation And Experimental Study Of Microscale Droplets In Drop-On-Demand Inkjet Printing (opens in a new tab) Download file for The Generation And Experimental Study Of Microscale Droplets In Drop-On-Demand Inkjet Printing (opens in a new tab)

  9. Development and Characterization of Multi-Material Printing of the Drop-on-Demand (DoD) System

    … multi-material product through means of Drop on Demand (DoD) dispensing, using different type of print heads with different methods of actuation within a single dispensing system. Other than compatibility issues and the necessary modifications to the hardware and software of an original …

    nus Repository record for Development and Characterization of Multi-Material Printing of the Drop-on-Demand (DoD) System (opens in a new tab) Download file for Development and Characterization of Multi-Material Printing of the Drop-on-Demand (DoD) System (opens in a new tab)

  10. Drop-on-Demand Embedding of Liquid Metals to Produce Thermal Pads with Advanced Properties

    … to heat sinks, enabling rapid temperature reduction and extending the lifespan of electronic components. However, conventional lab-scale and commercially available thermal pads often face challenges such as low thermal conductivity, limited maximum operating temperatures, and insufficient …

    unr Repository record for Drop-on-Demand Embedding of Liquid Metals to Produce Thermal Pads with Advanced Properties (opens in a new tab)

  11. Study of Drop-on-Demand Inkjet Printing Technology with Application to Organic Light-Emitting Diodes

    A drop-on-demand inkjet printing technology has been applied to print poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) on a given indium-tin-oxide (ITO) glass substrate to build polymer-based organic light emitting diodes (OLED). In comparison with spin-coating method, device …

    nus Repository record for Study of Drop-on-Demand Inkjet Printing Technology with Application to Organic Light-Emitting Diodes (opens in a new tab) Download file for Study of Drop-on-Demand Inkjet Printing Technology with Application to Organic Light-Emitting Diodes (opens in a new tab)

  12. Fabrication of hollow 3D tissue models with drop-on-demand bioprinting and controlled cellular self-assembly

    … work describes processes for the fabrication of three-dimensional (3D) tubular cell constructs and their structural and functional characterization and application. Drop-on-demand (DoD) bioprinting is applied as fabrication technology and controlled cellular self-assembly is integrated into …

    freiburg-diss Repository record for Fabrication of hollow 3D tissue models with drop-on-demand bioprinting and controlled cellular self-assembly (opens in a new tab)

  13. Computational Analysis of Liquid Metal Drop-on-Demand Jetting and Solidification Using a Contactless Magnetohydrodynamic Actuator

    … additive manufacturing (AM) techniques rely on beam-based methods to fuse together submillimeter metal powders into solid 3D objects. Although successful in select industries, these layerwise manufacturing processes require sophisticated beam--matter interaction process controls and expert …

    buffalo Repository record for Computational Analysis of Liquid Metal Drop-on-Demand Jetting and Solidification Using a Contactless Magnetohydrodynamic Actuator (opens in a new tab)

  14. DEVELOPMENT OF FUNCTIONAL APATITE MICROSPHERE SYSTEM FOR ENHANCED BONE TISSUE REGENERATION VIA DROP-ON-DEMAND INKJET METHOD

    … microsphere scaffolds have garnered much attention due to its high surface area to volume ratio which facilitates good cell attachment and further proliferation. However, there were limited studies and development in two areas which will improve the functionality of apatite microspheres as bone …

    nus Repository record for DEVELOPMENT OF FUNCTIONAL APATITE MICROSPHERE SYSTEM FOR ENHANCED BONE TISSUE REGENERATION VIA DROP-ON-DEMAND INKJET METHOD (opens in a new tab) Download file for DEVELOPMENT OF FUNCTIONAL APATITE MICROSPHERE SYSTEM FOR ENHANCED BONE TISSUE REGENERATION VIA DROP-ON-DEMAND INKJET METHOD (opens in a new tab)

  15. Development of a Graphic User Interface Based on OpenGL for a Drop-on-Demand Micro/Bio Fabrication System

    As one of the most important and widely used manufacturing technologies nowadays, inkjet printing technology is being developed and improved in a rapid speed in order to meet the progressively higher requirement and development in manufacturing and fabrication demands. With competitive advantages …

    nus Repository record for Development of a Graphic User Interface Based on OpenGL for a Drop-on-Demand Micro/Bio Fabrication System (opens in a new tab) Download file for Development of a Graphic User Interface Based on OpenGL for a Drop-on-Demand Micro/Bio Fabrication System (opens in a new tab)

  16. Drop-on-demand inkjet printing of amphiphilic peptide I3K micropatterns on regenerated silk fibroin surfaces to promote neuronal cell attachment and alignment

    … a regenerated silk fibroin (RSF) aqueous solution can be obtained. RSF has been used previously as a scaffold in tissue engineering due to its high biocompatibility and biodegradability and by varying the production and post-treatment process, RSF can be used for various biological purposes. …

    whiterose Download PDF for Drop-on-demand inkjet printing of amphiphilic peptide I3K micropatterns on regenerated silk fibroin surfaces to promote neuronal cell attachment and alignment (opens in a new tab)

  17. Ochrana fotografií lakováním

    … principy inkoustového tisku. Popisuje kontinuální tisk a drop on demand techniku. Zabývá se také papírovými médii používanými při inkoustovém tisku – nosnými podložkami a přijímacími vrstvami. Práce zahrnuje popis degradace tisku zapříčiněnou zářením, polutanty, vlhkostí a teplem. Zabývá …

    brno-tech Repository record for Ochrana fotografií lakováním (opens in a new tab)

  18. Producing Small Droplets of Aqueous Solutions and Molten Metals using a Pneumatic Droplet Generator

    A pneumatic droplet generator is described, which consists of a T-junction with a nozzle fit into one opening, the second opening is connected to a gas cylinder through a solenoid valve and the third connected to a length of steel tubing. The droplet generator is filled with liquid. Opening the …

    toronto-retro Repository record for Producing Small Droplets of Aqueous Solutions and Molten Metals using a Pneumatic Droplet Generator (opens in a new tab)

  19. 3D printing of energetic material

    … But with the advent of 3D printing, a solution for scalability is in reach. In this work, THV and GO are explored as candidate materials for printing. To avoid subjectivity, the materials have to pass a test of repeatability, control of geometry, and layer building. Moreover, a novel drop on …

    missouri Repository record for 3D printing of energetic material (opens in a new tab)

Page 1 of 4