Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 32 for “"Dross"”.

  1. Between sound metal and dross

    Here is my fourth version of the book and this one directs itself and tells me to stop being confessional and to save my divulgence for another manuscript. This manuscript focuses on the relationship between the Vorarephile and the Exile - because he is no prophet, he is a wanderer who has been cut …

    colostate Repository record for Between sound metal and dross (opens in a new tab)

  2. Kinetics of corrosion and dross build-up in molten Zn-Al systems.

    … the mechanisms of corrosion attack and dross build-up in molten Zn-Al systems. In hot-dip coating processes, molten Zn-Al baths corrode the submerged hardware, thus requiring frequent line stoppages for maintenance, repair, and replacement of parts. Similarly, containment of liquid Al/Al …

    wvu Repository record for Kinetics of corrosion and dross build-up in molten Zn-Al systems. (opens in a new tab)

  3. Dross formation mechanism and development of wear resistant scraper in aluminum-silicon-zinc coating bath.

    … of the main reasons for stoppages is the severe dross formation over the submerged hardware (sink roll), which results in poor coating layer over the steel sheet. Complete understanding of the mechanism of the dross formation over the submerged hardware has not yet been completely achieved. In …

    wvu Repository record for Dross formation mechanism and development of wear resistant scraper in aluminum-silicon-zinc coating bath. (opens in a new tab)

  4. Long-term performance of pot hardware in continuous galvanizing lines

    … and surface hardness were carried out. An unique dross build-up setup which consists of two sleeves counter rotating against each other was designed to simulate the dross build-up in production line. The chemical composition of the dross material formed and change in sleeve microstructures were …

    wvu Repository record for Long-term performance of pot hardware in continuous galvanizing lines (opens in a new tab)

  5. Computational fluid dynamics (CFD) and physical modelling of a metal refining process

    … initially added to the lead bath to form surface dross that contains both the required impurity and a large amount of lead oxide. This dross is then continuously mixed back into the bath to remove the lead oxide and capture more of the required impurity. A key requirement for this process is to …

    greenwich Download PDF for Computational fluid dynamics (CFD) and physical modelling of a metal refining process (opens in a new tab)

  6. Aproveitamento de resíduo de caulim em cerâmica branca

    … been applied. This market produces amounts of dross that are put in the environment in a wrong way, causing damages to it. Trying to reduce these damages, researches have been done in an attempt to use kaolin dross in ceramic. The disposal of kaolin dross in the environment by the industries of …

    brazil-ufrn Repository record for Aproveitamento de resíduo de caulim em cerâmica branca (opens in a new tab)

  7. The effects of the processing parameters on the laser machining of a green china ceramic

    … of the heat-affected zone, and the amount of dross produced by laser cutting green china ceramics;This study seeks an alternative method to cut greenware, which will reduce the high rate of defect found in conventional punching and trimming. The study was centered on laser cutting and in any …

    iastate Repository record for The effects of the processing parameters on the laser machining of a green china ceramic (opens in a new tab)

  8. Viability of a proposed transparent fluid model for analog metal casting filling process

    … a proposed transparent fluid model to mimic dross formation and dispersion in metal castings during the mold filling process. The major cause for dross formation includes the air entrainment, surface turbulence, and bubbles, which create oxide films inside the molten metal. The oxide films …

    northern-iowa Repository record for Viability of a proposed transparent fluid model for analog metal casting filling process (opens in a new tab)

  9. A UNIFIED FLUID-STRUCTURE-INTERACTION FORMULATION FOR DIRECT NUMERICAL SIMULATION OF DEFORMABLE HYPERELASTIC SOLIDS IMMERSED IN VISCOUS INCOMPRESSIBLE FLOW

    … such as steel or aluminum alloys, to reduce dross formation for improved production quality. The most common approach for the prediction and control of dross formation currently practiced in the industry is trial and error, which usually results in excessive waste of material and energy, as …

    maryland Repository record for A UNIFIED FLUID-STRUCTURE-INTERACTION FORMULATION FOR DIRECT NUMERICAL SIMULATION OF DEFORMABLE HYPERELASTIC SOLIDS IMMERSED IN VISCOUS INCOMPRESSIBLE FLOW (opens in a new tab)

  10. Modeling particle-particle and particle-wall interactions in liquid-particle flows in complex geometries

    … motivated by the industrial examples of: flow of dross particles near the sink roll surface in a galvanizing bath (moving surface), and the flow of particles in slot coating dies (free and moving surfaces). Particle motion and agglomeration play important roles in the example systems chosen for …

    mcmaster Repository record for Modeling particle-particle and particle-wall interactions in liquid-particle flows in complex geometries (opens in a new tab)

  11. The production of lead-silver and copper on Sifnos in the Early Bronze Age: the case of the sites at Akrotiraki, Kasela, Skali and Kitriani

    … furnace wall fragments and ore from Skali, slag, dross, furnace wall fragments from Kasela, dross and litharge impregnated hearth lining fragments and metallurgical ceramics from Akrotiraki and dross and litharge impregnated hearth lining fragments from Kitriani. At Skali, copper smelting was …

    greece Repository record for The production of lead-silver and copper on Sifnos in the Early Bronze Age: the case of the sites at Akrotiraki, Kasela, Skali and Kitriani (opens in a new tab)

  12. Characterisation of Laser Cutting for an Adaptive Control Environment

    … pressure reduces the HAZ size slightly, reduces dross attachment and has little effect on the kerf surface roughness. The effects are more pronounced on the mild steel than stainless steel because of the higher viscosity of liquid phase stainless steel. A slower feedrate increases both the HAZ …

    glasgow Download PDF for Characterisation of Laser Cutting for an Adaptive Control Environment (opens in a new tab)

  13. Skálagatapressa

    … ofan af álinu og til verður það sem kallað er dross. Eftir að drossið hefur farið ofan í skálarnar er það pressað og látið kólna og til verður það sem í daglegu tali er kallað drosskaka eða bara kaka. Því næst er kakan kæld því að taka skálarnar upp með lyftaranum og hvolfa úr þeim í sérstaka …

    reykjavik Repository record for Skálagatapressa (opens in a new tab)

  14. The Kinetics of Myeloid Derived Suppressor Cell Frequency and Function in Chronic Retroviral Infections

    During chronic retroviral infection, poor clinical outcomes correlate both with systemic inflammation and poor proliferative ability of HIV-specific T cells, however the connection between the two is not clear. Myeloid derived suppressor cells (MDSC), suppressive cells of myeloid origin that …

    washington Repository record for The Kinetics of Myeloid Derived Suppressor Cell Frequency and Function in Chronic Retroviral Infections (opens in a new tab)

  15. Development of Magnesium Silicate Hydrate Binder System with the Addition of Alkali Carbonates

    … feasibility to develop the M-S-H cement. The Mg dross from alloy industries is used as the alternative magnesium source and calcined clay is used as the alternative silicon source in the M-S-H formation. The results indicate that using the Mg dross is able to form M-S-H gel, and the reaction can …

    whiterose Download PDF for Development of Magnesium Silicate Hydrate Binder System with the Addition of Alkali Carbonates (opens in a new tab)

  16. On the appearance of oriented trees in tournaments

    … \(n\) + \(O(k^2)\). (2) confirms a conjecture of Dross and Havet. (3) provides an asymptotic form of a conjecture of Havet and Thomassé. (4) improves a result of Mycroft and Naia which applies to trees with polylogarithmic maximum degree. (5) extends the problem to the infinite setting, where we …

    birmingham Download PDF for On the appearance of oriented trees in tournaments (opens in a new tab)

  17. Alternative fluxes for lead bullion refining

    … temperature, time, and reagent quantity. The drosses obtained were analyzed chemically and with x-ray diffraction (XRD) to identify the phases formed. In using stoichiometric amount of calcium carbonate and sodium nitrate (i.e., 0.019g CaCO3 :1g crude lead), 99.99% of tin and 95% of arsenic …

    colo-mines Repository record for Alternative fluxes for lead bullion refining (opens in a new tab)

  18. Practical and Theoretical Investigation of Underwater Laser Cutting for Decommissioning Applications

    … cut quality is assessed in terms of the attached dross height and kerf width because the key requirement in decommissioning applications is that the parts being cut must be separated with minimal secondary waste. A 50 mm thick C-Mn steel workpiece was adequately cut with a maximum cutting speed of …

    lancaster Download PDF for Practical and Theoretical Investigation of Underwater Laser Cutting for Decommissioning Applications (opens in a new tab)

Page 1 of 2