Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 43 for “"Dry etch"”.
-
Characterization, optimization, and simulation in through silicon via (TSV) dry etch
Two approaches of through-silicon-via (TSV) etching methods, the Bosch process (alternating etching/passivation phases) and the single-step etching, have been experimentally investigated and theoretically modeled in this study. Parameter ramping and post-etch plasma treatment techniques have been …
-
Spectroscopic characterization of dry etch-induced modification in III-V semiconductors and semiconductor heterostructures
The effects of dry etching on the structural and electrical properties of III-V semiconductors and semiconductor heterostructures were studied using vibrational and electronic Raman spectroscopy and low and room temperature photoluminescence spectroscopy. The frequency, intensity, and lineshape of …
-
Characterization and modeling of dry etch processes for titanium nitride and titanium films in Cl₂/N₂ and BCl₃ plasmas
… dimensions. The gaseous plasma assisted etching is one of these revolutionary processes. However, the plasma and the etch process are very complex in nature. It has been very difficult to understand various species present in the plasma and their role in the etch reaction. In addition, …
-
Grafted polymer monolayer brush as electron beam resist
… (PDMS) as negative tone e-beam resist with high dry etch resistance were studied. The main advantage of grafted polymer brush as electron beam is that it is applicable on non-flat or irregular surfaces. Although nanofabrication on non-flat surfaces has a lot of applications such as …
-
Nanolithographically defined semiconductor quantum dots
… (QWs) using a top-down nanosphere lithography, dry-etch and overgrowth fabrication process. Devices are characterized by a current density-voltage (JV) test, electroluminescence (EL) and photoluminescence (PL) spectroscopy. The quantum confi nement is simulated by COMSOL.
-
Optimization of Dry and Wet GaN Etching to Form High Aspect Ratio Nanowires
… fabrication is studied through the use of dry and wet etching techniques. Specifically, dry etching is studied focusing on the effects of etching power, pressure, and the use of chloroform during the process. Wet etching of GaN nanowires takes the initial structures formed by the dry etch …
-
Integrated polarisation rotators
… which were realised in a single reactive ion dry-etch process step. An in-situ custom built sample holder was utilised to place the samples at a predetermined angle to the incoming ions, which resulted in waveguide profiles with sloped sidewalls. This fabrication technique also allowed the …
-
FABRICATION AND CHARACTERIZATION OF A MONOLITHIC PHOTONIC INTEGRATED CIRCUIT WITH HIGH-ASPECT RATIO PHOTONIC DEVICE STRUCTURES
… components of this device to be created by deep etching of an epitaxially-grown multilayer structure. Therefore, a novel dry etching process was developed to produce very high aspect- ratio (HAR) features. This process not only involved the development of dry etch chemistry but also the …
-
Etched-and-Regrown Diodes on M-Plane GaN for Next Generation Power Electronic Devices
… Thus, effects of impurity contamination and etch damage are investigated on the m-plane (10-10) of GaN. Impurites (Si, O, and C) are shown to reduce blocking voltage (~ 102 ×) and increase forward leakage current (~ 104 ×) in regrown versus continuously-grown p-n diodes. Elevated deep level …
-
Development of block copolymer lithography for device structure fabrication
… BCP thin films, which act as an ‘on-chip’ etch mask and material templates, are highly promising self-assembling process for future scalable nanolithography. Unlike conventional BCP processing methods, the work in this thesis demonstrates that well-ordered patterns can be achieved in a few …
-
Development of a HBr-Based ICP-RIE Process for Smooth and Anisotropic Etching of III–V Semiconductors
This thesis presents the development of a dry etching recipe using hydrogen bromide (HBr) for the fabrication of InP/InGaAs-based heterostructures. The recipe aims to replace a methane-based process to avoid chamber contamination while maintaining a highly directional etch profiles and smooth …
-
Ohmic Metallizations to Aluminum Gallium Nitride/gallium Nitride High Electron Mobility Transistors: Electrical and Microstructural Studies
… ultra-shallow Si plasma implantation and dry etch effects of SiCl4 pre-metallization treatment. Demonstrated the best performance by side-way direct contact of the metal with the 2DEG channel. (8) Characterized the carrier transport mechanism by variable temperature measurement between 100 …
-
Metal-assisted chemical etching of β-gallium oxide
… next-generation power electronics. Nonetheless, dry etch typically damages the surface due to high-energy ions, while most wet etching techniques can only produce very limited aspect ratios. In this thesis, β-Ga2O3 fin arrays by inverse metal-assisted chemical etching (MacEtch), under UV light …
-
Quantum Spin Hall Effect - A new generation of microstructures
… We have proven the conventional ion milling etch method to damage the remaining mesa and result in drastically lower electron mobilities in samples of microscopic size. The novel KI:I2:HBr wet etch method for macro and microstructure mesa fabrication has been shown to leave the crystalline …
-
A single phase Al₀ 3Ga₀ 7As/GaAs heterojunction resistive-gate charge-coupled device
… r.f. magnetron sputtered Cr:SiO islands and a dry etch process to create interconnect vias. Two process runs of HRGCCDs, with differing layer parameters, were fabricated and evaluated at 4.33 MHz and at 50 MHz. The HRGCCDs tested at 50 MHz exhibited a charge transfer efficiency in excess of …
-
Nanofabrication of direct positioning atomic force microscope (AFM) probes and a novel method to attain controllable lift-off
… the AFM tip. Those are evaporation, wet etch and dry etch. The basic concepts, working mechanism and important parameters of these three techniques are discussed. The third chapter presents detail of the AFM probe with its history, principle of operation, fabrication method and carbon …
-
Dry Etched III-V Semiconductors for Nanoelectronics
… both the surface and sidewalls of reactive ion etched GaAs and AlGaAs nanostructures using a variety of complimentary characterisation techniques, and to develop low damage high resolution dry etch processes for GaAs and AlGaAs. The gases investigated included SiCl4, CH4/H2 and CCl2F2/He. Two …
-
Vanadium Oxide Microbolometers with Patterned Gold Black or Plasmonic Resonant Absorbers
… This patterned gold black also survives the dry-etch removal of the sacrificial polyimide used to fabricate the air-bridge bolometers. Infrared responsivity is improved 70% for mid-wave IR and 22% for long-wave IR. The increase in the thermal time constant caused by the additional mass of …
-
Semiconductor ring lasers for all-optical signal processing
… NOT operation with data rates up to 2.5 Gbit/s. Dry etch chemistries for realizing 3.2 - 4.5 um deep waveguides, which show minimal bending losses, are developed and evaluated in order to enable dense integration of SRL devices. In addition, compact, milliwatt output power racetrack shaped cavity …
Page 1 of 3