Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 12 of 12 for “"Dry strength"”.
-
Functionalized Starch Nanoparticles for Pulp-Based Active Packaging
… These strategies are: (1) to improve wet and dry strength by optimizing the composition of the pulp paper; (2) to introduce an antimicrobial component to the pulp using silver nanoparticles (AgNP); and (3) to explore paper sizing using hydrophobically modified starch. Firstly, cationic StNPs …
-
Assessing the Effect of Material Properties on Full Depth Reclamation (FDR) Mixtures via Compressive Strength Characterization
… resulting in a new base layer with improved strength and structural stability. Despite the continued exploration of FDR, there is limited knowledge on the technique’s response to varying material qualities and quantities. This study aimed to characterize FDR mixes with a range of aggregates …
-
Soy protein polymers: Enhancing the water stability property
… The incorporation of cotton fibers improved the dry strength by 18%, but did not significantly improve the wet state strength of the plastics. It was also observed that the butylated-hydroxy anisole (BHA) formulation exhibited high extension values in the dry state and had inferior water …
-
Collapse of stone column foundations due to inundation.
… soils which possess considerable in-situ dry strength that is largely lost when the soils become wetted. Foundation design in such soils is difficult at best. In many cases, deep foundations may be required to transmit foundation loads to suitable bearing strata below the 'collapsible' …
-
The influence of press felt seam on paper wet strength
… seams can lead to variations in the wet and dry strength of paper compared to areas pressed without seams. This study investigates the impact of press felt seams on the wet strength of paper. An experimental apparatus is developed to apply pressure to the paper using a seamed press felt under …
-
Additives Impact On Wet Strength And Size Development In Papermaking- Polyamide Epichlorohydrin (PAE), Alkenyl Succinic Anhydride (ASA) And Alkyl Ketene Dimer (AKD) Cases
… the efficiency of the paper making process. Wet strength agents, sizing agents, dry strength agents, fillers, retention aids, defoamers, dyes and pigments are common additives used in paper mills. Poor retention of wet strength additive such as PAAE (polyamide epichlorohydrin) and hydrophobicity …
-
Microparticle retention aid systems in mechanical pulp suspensions
… is studied. While starch is primarily added as dry strength agent in PCC-filled TMP suspensions, it also has a significant role in improving retention and drainage. Tapioca starch, which has both amylose and amylopectin, is found to be a better retention and drainage aid than waxy maize starch, …
-
Engineered polysaccharide, Alpha-1,3 Glucan, as a Functional Filler of Rubber Composites
… against water vapor, oxygen, oil as well as on dry and wet mechanical properties were investigated. In order to study the impact of alpha,1-3 glucan’s morphology on the barrier properties of the paper coating, the following studies were conducted. This study employed enzymatically polymerized …
-
Thermal Management and Solidification Characteristics in High Performance Aluminum Casting
… sand mold properties such as the green and dry strengths of the water soluble sand binder system used in the study were tested to ensure that they meet the molding requirements. An average green strength of 160 kPa and an average dry strength of 3825 kPa were found for the water soluble sand …