Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 50 for “"Dual Phase (DP)"”.
-
Multi-Scale Analysis of Deformation and Damage Development in DP1000 Automotive Steel
The use of dual-phase (DP) steels in the automotive industry is rising due to their light weight and ability to enhance safety. The development of next generation DP steels requires better understanding of their microstructure deformation and damage propagation to help predict their mechanical …
-
Studio delle trasformazioni dell’austenite negli acciai multifase innovativi
… degli acciai multifase include gli acciai Dual-Phase (DP), TRIP, a fasi complesse (CP) e martensitici (MS). Le proprietà di questi materiali sono date principalmente dalla combinazione delle componenti microstrutturali con diversi gradi di durezza. Le strutture degli acciai multifase sono …
-
Deformation Response and Formability Limit Diagram Estimates of Dual-Phase Steels
New Dual-Phase (DP) steel sheet with desirable mechanical properties are developed using trialand-error methods that are time-consuming and expensive. Using only micro-structural information, methods to predict stress-strain under tension, reverse yield under compression following tensile loading, …
-
Predicting the Flow and Failure Properties of Dual Phase Steel Using Finite Element and Phenomenological Models
… to the complexity of the mechanical response of Dual Phase (DP) steels, steel makers rely largely on experiments and trial-and-error approaches to develop new lines with higher strength and ductility in order to enable light weighting of automotive parts. Crucially, the flow and failure behaviors …
-
Effects of Laser Welding on Formability Aspects of Advanced High Strength Steel
… AHSS (including High strength low alloy (HSLA), Dual phase (DP) steels of different grades). Mechanical properties of the base metal and welded blanks were assessed by uniaxial tensile and biaxial LDH tests, and related to measured microhardness distributions across the welds. The formability …
-
Analysis of microstructural changes in fiber laser welded galvanized DP980 and HSLA steels
… the mechanical properties of welded materials. Dual phase (DP) steels, which are designed to obtain soft ferrite and hard martensite, have gained increasing popularity in structural applications. In this research, the microstructural changes that occur in narrow HAZ and FZ are systematically …
-
The Effect of Weld Design on the Formability of Laser Tailor Welded Blanks
… high strength steels (AHSS) into the TWBs. Dual phase (DP) steel is a type of AHSS that is of interest because of its combination of high strength and good formability that is comparable to high strength low alloy (HSLA) steels. However, welding DP steel causes softening in the heat affected …
-
Finite Element Analysis of Bending in High-Strength Steels
… of various steel grades, starting with Dual-Phase DP 980. To do this we have modeled 90° sheet metal bending in the common VDA V-Bend test and 3-point bend test configurations respectively. This modeling effort is undertaken using the Finite Element Analysis (FEA) method with HyperWorks …
-
Effect of Vanadium Addition on Deformation and Fracture Behavior of DP1300 Dual Phase Steels
… gas emissions in the automotive industry. Dual phase (DP) steels that consist of a hard martensite phase embedded in a soft ferrite matrix are the most widely used AHSS due to their simple microstructure, robust thermo-mechanical processing and attractive mechanical properties. However, DP …
-
Hole expansion performance and the resistance to crack propagation in high strength DP and QP steels
… The materials of interest are high strength dual phase (DP) and quenched and partitioned (QP) steels. The results showed that the difference in hardness between martensite and ferrite proved to have the most effect on the HER for the DP steels. For the QP steels, there did not seem to be a …
-
Low carbon ultrafine grained dual phase steels
… (UFG) (i.e. grain size of the order 1 µm) dual phase (DP) steels have been investigated using a thermo-mechanical process designed to obtain fine ferrite-carbide aggregates prior to intercritical annealing. The effects of carbon content, alloying additions, initial starting structures and …
-
Grain refinement in dual phase steels
… potential production route of ultra fine grained dual phase (DP) steels was studied. Deformation induced ferrite transformation (DIFT) was applied in laboratory tests employing a Gleeble 3500 thermo-mechanical simulator to produce fine grained dual phase steels in two chemistries: a conventional …
-
Study of Back-Stress and Void Damage in Dual Phase Steels Subjected to In-Plane Shear
… work hardening and back-stress that develops in dual-phase (DP) steels using an in-plane shear test, and to use tools such as micro-computed X-ray tomography and scanning electron micrography (SEM) to examine the potential effect of damage on back-stress at higher pre-strains. Five …
-
Correlation of microstructure, tensile properties and hole expansion ratio in cold rolled advanced high strength steels
… strengths of 1000 ± 100 MPa were evaluated: five dual-phase (DP) steels with different compositions and varying microstructural features, one trip aided bainitic ferrite (TBF) steel, and one press-hardened steel tempered to a tensile strength within the desired range. It was found that sheared …
-
Comparação do efeito da fragilização por hidrogênio em aços com resistência à tração acima de 1000 MPa
… Advanced High Strength Steels (AHSS): aços Dual Phase (DP 1000 e DP 1200) e aço Martensítico (M 190). A introdução de hidrogênio nos materiais foi realizada através de carregamento catódico, o qual é representativo para as condições industriais a que se destinam. De modo a avaliar a …
-
HIGH-TEMPERATURE PHYSICO-MECHANICAL PROPERTIES OF AS-RECEIVED STRUCTURES IN DUAL-PHASE ADVANCED HIGH-STRENGTH STEELS
Dual-phase (DP) advanced high-strength steels (AHSSs) are widely used in the automotive industry due to their excellent combination of strength, ductility, and work hardening properties. However, defects occurring during processing make these ferrous alloys expensive. Toward this ends, …
-
Intercritical Heat Treatments in Ductile Iron and Steel
Materials such as dual phase (DP) steels, transformation induced plasticity (TRIP) steels and dual phase ductile irons are produced by intercritical heat treatments. These materials can provide significant weight savings in the automotive industry. The goal of this dissertation is to study …
-
Friction Stir Welding of High-Strength Automotive Steel
… blanks (TWB) for use in the automotive industry. Dual Phase (DP) 590, 780, and 980 steel as well as Transformation-Induced Plasticity (TRIP) 590 steel with thicknesses ranging from 1.2 mm to 1.8 mm were welded using friction stir welding under a variety of processing conditions, including …
-
Damage Investigation in Dual-Phase 1000 Steel and Behaviour Prediction Using Microstructure Based Modelling
Dual phase (DP) steels are advanced high strength steels that are being progressively used in the automotive industry in order to reduce weight while enhancing safety. The development of the next generation DP steels requires better understanding of the deformation and damage development at the …
-
The Role of Heterogeneous Constitutive Properties on Mechanical Behavior of Advanced High Strength Steel Spot Welds
… of resistance spot welds (RSW) made from dual-phase (DP) and martensitic (MS) Advanced High Strength Steels (AHSS) does not scale linearly with the tensile strength of their base metals. Although this degradation of welds strength has been linked by researchers to a phenomenon known as …
Page 1 of 3