Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 57 for “"Dual Phase Steel"”.

  1. The mechanical properties and formability of dual-phase steel

    In recent years dual phase steels comprising of 5-20% martensite in a ferrite matrix have come into the limelight of high strength cold formable steels because of their potential for vehicle weight saving. They show the following features: no yield point; relatively low initial flow stress; high …

    aston Download PDF for The mechanical properties and formability of dual-phase steel (opens in a new tab)

  2. Void formation during tensile testing of dual phase steel

    Includes bibliographical references.

    colo-mines Repository record for Void formation during tensile testing of dual phase steel (opens in a new tab)

  3. A constitutional study of a dual phase steel containing 12% chromium

    This thesis involved a study of the phase transfonnations in a chromium containing corrosion resistant dual phase steel, designated 3CR12. The objectives included the detennination of time-temperature-transformation (TTT) diagrams for the transformations between austenite and ferrite and an …

    cape-town Repository record for A constitutional study of a dual phase steel containing 12% chromium (opens in a new tab)

  4. Deformation and fracture behaviour of a low-carbon dual-phase steel

    … annealed commercial low carbon (0.06 wt.%) dual phase steel. The volume fraction and the morphology (banded and almost equiaxed) of the martensite phase were systematically varied by control of the intercritical annealing temperature and the heating rate to this temperature. It was observed …

    ubc Repository record for Deformation and fracture behaviour of a low-carbon dual-phase steel (opens in a new tab) Download PDF for Deformation and fracture behaviour of a low-carbon dual-phase steel (opens in a new tab)

  5. Deformation substructure development in a C-Mn-Si dual-phase steel

    Includes bibliographical references.

    colo-mines Repository record for Deformation substructure development in a C-Mn-Si dual-phase steel (opens in a new tab)

  6. Microstructure evolution during intercritical annealing of a Mn-Cr dual-phase steel

    … during intercritical annealing of a low-carbon steel suitable for industrial production of dual-phase steels (DP600 grade) on a hot-dip galvanizing line. The microstructure evolution model consists of individual submodels for recrystallization, austenite formation in a fully recrystallized …

    ubc Repository record for Microstructure evolution during intercritical annealing of a Mn-Cr dual-phase steel (opens in a new tab) Download PDF for Microstructure evolution during intercritical annealing of a Mn-Cr dual-phase steel (opens in a new tab)

  7. Predicting the Flow and Failure Properties of Dual Phase Steel Using Finite Element and Phenomenological Models

    … to the complexity of the mechanical response of Dual Phase (DP) steels, steel makers rely largely on experiments and trial-and-error approaches to develop new lines with higher strength and ductility in order to enable light weighting of automotive parts. Crucially, the flow and failure behaviors …

    guelph Repository record for Predicting the Flow and Failure Properties of Dual Phase Steel Using Finite Element and Phenomenological Models (opens in a new tab)

  8. Microstructural origins of variability in the tensile ductility of dual phase steels

    … strength (~ 1000 MPa) high martensite (>50%) dual phase steel where the martensite is a topologically continuous phase (matrix) containing a dispersion of islands of ferrite, and (ii) focuses on understanding the microstructural origins of the variability in fracture sensitive mechanical …

    gatech Repository record for Microstructural origins of variability in the tensile ductility of dual phase steels (opens in a new tab)

  9. The effect of strip casting on microstructural development in dual phase steels

    … technology that can produce thin sheets of steel directly from molten metal without additional intermediate processing steps. This method can significantly reduce the amount of energy required during casting and also reduces greenhouse gas emissions. However, the rapid cooling experienced …

    adelaide Repository record for The effect of strip casting on microstructural development in dual phase steels (opens in a new tab)

  10. An Investigation Of Residual Stresses Induced By Forming Processes On The Fatigue Resistance Of Automotive Wheels

    … sheet metal forming processes affect the residual stresses (plastic deformation) and the fatigue perfomiance of wheel centre discs made of a dual phase steel. Automotive wheels are mainly manufactured from sheet metal plate by forming processes using tools and dies. This manufacturing process …

    plymouth Repository record for An Investigation Of Residual Stresses Induced By Forming Processes On The Fatigue Resistance Of Automotive Wheels (opens in a new tab)

Page 1 of 3