Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 21 for “"Dual mobility"”.
-
Function and failure mechanisms of dual mobility bearings for total hip replacement
Dual Mobility (DM) Total Hip Replacements (THRs) were introduced to combat the complex challenge of hip dislocation for at-risk patients. These are characterised by an unconstrained polyethylene liner therefore introducing a secondary articulating surface between the liner and acetabular component. …
-
Die Revision der luxierten Hüfttotalendoprothese: Outcome - Analyse und der Stellenwert der Dual - Mobility - Pfanne
… occurring causes of revision hip surgery. Dual-Mobility-Cups (DMC) are increasingly used in primary and revision arthroplasty to reduce the risk of dislocation. However, there is limited data on the efficacy of DMC in revision due to recurrent dislocation. The aim of this work was to …
-
Working principle of the dual mobility (total hip replacement): wear mechanisms and design optimization
The dual mobility concept for hip implants was invented in the 70s to address the issue of postoperative dislocations. The idea was to mix the Charnley “Low Friction Principle” that recommended a small head, i.e. decreasing of wear due to small diameter, and the benefit on the dislocation rate of a …
-
Design and Biomechanical Evaluation of a Self-Centering Dual Mobility Concept for Reverse Total Shoulder Arthroplasty
… notching, and persistent trade-offs among mobility, constraint, and stability. This thesis investigated whether dual mobility principles established in total hip arthroplasty could be translated to RTSA in a biomechanically coherent manner. The central objective was not simply to introduce …
-
The Effect of Modular Dual Mobility Design on the Dislocation Resistance of a Primary Total Hip
… of the dislocation resistance of multiple dual mobility prosthesis designs. Twelve design combinations were tested in a patient driven, posterior dislocation event, and their range of motion at impingement, range of motion at dislocation, peak resistive moment, and energy to dislocate were …
-
Degradation of Cobalt Chrome Molybdenum Hip And Knee Implants in Vivo and in Vitro
… knee arthroplasty and for acetabular liners in dual mobility total hip designs. CoCrMo has been phased out of conventional THA designs due to its correlation with adverse effects such as ALTR and ALVAL. It is less understood if the mechanisms (i.e. abrasive wear to the surface of the implant) …
-
Prevention of dislocation after total hip arthroplasty through different approaches: surgical considerations /
… tissue management, implant selection (head size, dual mobility systems), the influence of leg length and offset changes and the role of technological aids, like robotic-assisted surgery in decreasing dislocation rate. Findings in literature show, that successful prevention begins with taking …
-
Dislocation Mechanics of Total Hip Arthroplasty: A Combined Experimental and Computational Analysis
… in the rotation. Additionally, we found that dual mobility total hip arthroplasty provided a greater resistive torque during an impingement event than conventional total hip arthroplasty.
-
Hip Arthroplasty in the Fragile Patient - Reccomendations based on the Dutch Arthroplasty Register
… surgery. For this research results of the dual mobility cup were investigated. In this design, the head of the hip consists of an outer cup with a smaller articulating head inside. The studies of this thesis have shown that this special head functions just as well as the regular head, …
-
A Hybrid Tracking Approach for Autonomous Docking in Self-Reconfigurable Robotic Modules
… self-reconfigurable mobile robot design exhibits dual mobility using a tracked drive for longitudinal locomotion and wheeled drive for lateral locomotion. The two degrees of freedom (DOF) docking interface referred to as GHEFT (Genderless, High strength, Efficient, Fail-Safe, high misalignment …
-
Understanding Corrosion in Modular Acetabular Tapers: Retrieval Analysis, In Vitro Testing and Cell-Material Interactions
… and a metal/ceramic/polymer liner pair, or a dual-mobility articulation design with an added polymeric insert containing a freely rotating femoral head. Both designs often include a metal-on-metal (MoM) or modular dual-mobility (MDM) shell-liner interfaces, which is prone to corrosion and …
-
Zusammenhang des ossären und muskulären Defizits in der Revisionsendoprothetik der Hüfte
… stehen. Hierfür kommen große Prothesenköpfe, Dual Mobility Cups und Schnappinlays in Frage.
-
Operative Behandlung von Beckendiskontinuität bei liegender Hüftendoprothese mittels asymmetrischem Pfannenimplantat mit intra- und extramedullärer Fixierung
… erlitten, war bei zweien die Implantation einer Dual-Mobility-Acetabulumkomponente erforderlich. DISKUSSION: Wir konnten für die Implantation des hier beschriebenen Systems gute Ergebnisse für einen mittelfristigen Nachuntersuchungszeitraum nachweisen. In Zukunft könnte diese Technik die bereits …
-
A tribological investigation into the wear and lifetime prediction of metal on plastic artificial hip implants
… on popular implant design iterations such as dual mobility implants and implants with surface texturing. Such a method has the potential to be both an important tool in surgical decision making when evaluating if an implant is a worthwhile surgical intervention for a specific patient, and a …
-
Mittelfristige funktionelle und radiologische Ergebnisse von Patient:innen mit einer Pfannenzementierung in eine fest verankerte Pfanne (Cup in Cup)
… besteht die Möglichkeit zur Zementierung einer Dual Mobility Pfanne (DMC) nach Inlay-Entfernung. Neben der postoperativen Prävention einer erneuten Luxation ist ein Vorteil dieser Off-Label-Anwendung einer DMC, dass die alte Pfanne belassen und somit Knochensubstanz erhalten werden kann. Aus …
-
Femoroacetabular Impingement Syndrome and Total Hip Arthroplasty: Joint Biomechanics Before and After Surgery
… which allowed them to achieve greater pelvic mobility and squat as deep as the CTRL group. Second, at the follow-up for the FAI surgery the patients showed increased pelvic ROM during the squat, and weakness associated with hip flexion and hip flexion-with-abduction were associated with …
-
Predictive Modeling of Hip Dislocation: Assessment of Surgical and Patient Factors to Reduce the Occurrence of Hip Instability and Adverse Clinical Outcomes
… 2.8 Nm/mm of additional jump distance. A dual-mobility acetabular design resulted in a resistive moment of 30 Nm. Tradeoffs between acetabular component position, design, and patient activity and the relative clinical risk of adverse implant loading as well as anterior and posterior …
-
The Effects and Analysis of Implant Type and Surgical Approach in Total Hip Arthroplasty Dislocation Resistance
Total hip arthroplasty (THA) is one of the most successful orthopaedic surgeries performed, in which the hip joint is reconstructed to decrease pain and to improve the functionality to the joint. Although these surgeries are very successful, there still remain areas for improvement, such as …
-
Napjatostně deformační analýza trapéziometakarpálního kloubu s tvarovými odchylkami
Tato diplomová práce se zabývá napjatostně-deformační analýzou totální náhrady trapeziometakarpálního (TMK) kloubu palce ruky. Cílem bylo vyhodnotit vliv tvarových odchylek na mechanické chování implantátu a okolní kostní tkáně. Na základě reálné geometrie komponent byl vytvořen výpočtový model …
Page 1 of 2