Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 52 for “"Dual phase steels"”.

  1. GALVANNEALING OF DUAL PHASE STEELS

    <p>The high strength and ductility of dual phase (DP) steels makes them ideal for use in the automotive industry. However, to be used in automotive exposed parts galvanizing (GI) and galvannealing (GA) processes are essential to provide corrosion protection. Galvannealing of dual phase steels has …

    mcmaster Repository record for GALVANNEALING OF DUAL PHASE STEELS (opens in a new tab)

  2. Grain refinement in dual phase steels

    … potential production route of ultra fine grained dual phase (DP) steels was studied. Deformation induced ferrite transformation (DIFT) was applied in laboratory tests employing a Gleeble 3500 thermo-mechanical simulator to produce fine grained dual phase steels in two chemistries: a conventional …

    ubc Repository record for Grain refinement in dual phase steels (opens in a new tab) Download PDF for Grain refinement in dual phase steels (opens in a new tab)

  3. Bake-hardening of dual-phase steels

    … strengths and dent-resistance of two lean-alloy dual-phase steels which had been lightly prestrained in uniaxial tension, plane strain and balanced biaxial tension were investigated. 0.5% proof stress and UTS values were measured at o° and 90° to the direction of maximum extension in prestraining …

    aston Repository record for Bake-hardening of dual-phase steels (opens in a new tab) Download PDF for Bake-hardening of dual-phase steels (opens in a new tab)

  4. Micromechanical modeling of Dual-Phase steels

    Dual-phase (DP) steel is a high strength steel, much used by the automotive industry due to its characteristic combination of low initial yield stress, high tensile stress and easy cold working and weldability. These advantageous features are related to the microstructure of soft ferrite and hard …

    chalmers Repository record for Micromechanical modeling of Dual-Phase steels (opens in a new tab)

  5. Low carbon ultrafine grained dual phase steels

    … (UFG) (i.e. grain size of the order 1 µm) dual phase (DP) steels have been investigated using a thermo-mechanical process designed to obtain fine ferrite-carbide aggregates prior to intercritical annealing. The effects of carbon content, alloying additions, initial starting structures and …

    ubc Repository record for Low carbon ultrafine grained dual phase steels (opens in a new tab) Download PDF for Low carbon ultrafine grained dual phase steels (opens in a new tab)

  6. Ferrite grain refinement in dual phase steels

    Dual phase steels with microstructure of hard martensite islands dispersed in ductile ferrite matrix, possess an optimum balance of strength and ductility alongwith a high work hardening rate. With this attractive combination of mechanical properties, dual phase steels are the candidate materials …

    ubc Repository record for Ferrite grain refinement in dual phase steels (opens in a new tab) Download PDF for Ferrite grain refinement in dual phase steels (opens in a new tab)

  7. Effects of microstructure on the deformation of dual-phase steels

    Includes bibliographical references.

    colo-mines Repository record for Effects of microstructure on the deformation of dual-phase steels (opens in a new tab)

  8. Edge Fracture Prediction Of Dual Phase Steels With Consideration Of Microstructures

    In recent years, Advanced High Strength Steels (AHSS) have been used for the lightweight structural design and manufacturing in automotive industry. This class of sheet metals are prone to edge fracture during stamping production, and the fracture often occurs at much lower strain than that …

    wayne-thes Repository record for Edge Fracture Prediction Of Dual Phase Steels With Consideration Of Microstructures (opens in a new tab)

  9. Deformation Response and Formability Limit Diagram Estimates of Dual-Phase Steels

    New Dual-Phase (DP) steel sheet with desirable mechanical properties are developed using trialand-error methods that are time-consuming and expensive. Using only micro-structural information, methods to predict stress-strain under tension, reverse yield under compression following tensile loading, …

    guelph Repository record for Deformation Response and Formability Limit Diagram Estimates of Dual-Phase Steels (opens in a new tab)

  10. The effect of strip casting on microstructural development in dual phase steels

    … casting on the microstructural development of dual phase steels is examined. Specimens of a dual phase steel have been produced directly from the liquid under conditions that simulate direct strip casting and thin slab casting.

    adelaide Repository record for The effect of strip casting on microstructural development in dual phase steels (opens in a new tab)

  11. Microstructural origins of variability in the tensile ductility of dual phase steels

    … strength (~ 1000 MPa) high martensite (>50%) dual phase steel where the martensite is a topologically continuous phase (matrix) containing a dispersion of islands of ferrite, and (ii) focuses on understanding the microstructural origins of the variability in fracture sensitive mechanical …

    gatech Repository record for Microstructural origins of variability in the tensile ductility of dual phase steels (opens in a new tab)

  12. AUSTENITE GROWTH IN THE INTERCRITICAL ANNEALING OF TERNARY AND QUATERNARY DUAL-PHASE STEELS

    … of ternary (Fe-C-Mn) and quaternary (Fe-C-Mn-Si) dual phase steels is studied. The growth process is modelled assuming local equilibrium at austenite/ferrite interfaces and diffusion control. An isothermal anneal starting with a ferrite-pearlite mixture is examined. Growth proceeds in four stages: …

    mcmaster Repository record for AUSTENITE GROWTH IN THE INTERCRITICAL ANNEALING OF TERNARY AND QUATERNARY DUAL-PHASE STEELS (opens in a new tab)

  13. Study of the strengthening mechanisms of the Fe-C-Mn dual phase steels, A

    Includes bibliographical references (pages 231-244).

    colo-mines Repository record for Study of the strengthening mechanisms of the Fe-C-Mn dual phase steels, A (opens in a new tab)

  14. Effects of strain rate on mechanical properties and fracture mechanisms in dual phase steels

    Dual Phase (DP) steels are a class of Advanced High Strength Sheet (AHSS) steels which are used as structural components of an automobile body. They possess a good combination of strength and formability coupled with crashworthiness. The microstructure of DP steels consists largely of ferrite and …

    gatech Repository record for Effects of strain rate on mechanical properties and fracture mechanisms in dual phase steels (opens in a new tab)

  15. Effect of Vanadium Addition on Deformation and Fracture Behavior of DP1300 Dual Phase Steels

    … gas emissions in the automotive industry. Dual phase (DP) steels that consist of a hard martensite phase embedded in a soft ferrite matrix are the most widely used AHSS due to their simple microstructure, robust thermo-mechanical processing and attractive mechanical properties. However, DP …

    mcmaster Repository record for Effect of Vanadium Addition on Deformation and Fracture Behavior of DP1300 Dual Phase Steels (opens in a new tab)

  16. Thermo-Mechanical Processing of Dual-Phase Steels and Its Effects on the Work Hardening Behaviour

    … the different work hardening mechanisms of DP steels. Through the application of various thermo-mechanical processing schedules prior to inter-critical (IC) annealing, five distinctly different microstructural variants were produced. The work hardening behaviour of the five microstructural …

    queens Repository record for Thermo-Mechanical Processing of Dual-Phase Steels and Its Effects on the Work Hardening Behaviour (opens in a new tab)

Page 1 of 3