Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 7 of 7 for “"Ductility Index"”.
-
Ductility and Use of Titanium Alloy and Stainless Steel Aerospace Fasteners
… purpose of this thesis is to investigate the ductility and application of titanium alloys, like titanium 6Al-4V, when used in aerospace fasteners compared to more conventional stainless steel aerospace fasteners such as A286. There have been concerns raised about the safe usability of titanium …
-
Ductility of lightly reinforced and fiber-reinforced concrete elements: A unified approach
… Such approach is based on the definition of the ductility index ( DI ), which is a function of the difference between the ultimate load and the effective cracking load. Therefore, DI is higher than zero when a lightly reinforced member shows a ductile response, whereas it is negative in case of …
-
Structural lightweight concrete with pumice aggregate
… presented in terms of load-deformation behavior, ductility index, and cracking behavior.
-
LONG TERM DEFORMATIONS OF PORTLAND BLAST FURNACE SLAG CEMENT CONCRETE
… does not have significant effect on the ductility index. An increase in Blaine fineness of slag from 350 m2/kg to 550 m2/kg reduces the shrinkage and creep of PBFC concrete particularly at 55% slag replacement. The porosity of PBFC concrete with water-binder ratio of 0.5 was decreased. …
-
Experimental and Theoretical Investigations of a New Flat Slab System Incorporating GFRP Stay-In-Place Structural Forms and Embedded I-Beams
… with GFRP top rebar only, and an increase in ductility index from 1.6 to 3.1. An analytical model was developed, accounting for concrete contribution and flexural and web contributions of I-beams. Results agreed with experimental punching shear strength, within -6 to +13%, and a parametric …
-
The Effects of Nuclear Radiation on Aging Reinforced Concrete Structures in Nuclear Power Plants
… strength capacity, failure mode, and structural ductility index of members. The results show that ultimate shear capacity of the elements subjected to combinations of shear and tension loading are reduced significantly for highly reinforced elements ($1.35<\rho<1.88$) in $2\times 10^{21} n/cm^2$ …
-
Gravity load designed RC frame under far field earthquake action
… glass FRP retrofit system, the strength and the ductility of the frame were increased by 29% and 75% respectively. It was also observed that the system delayed the formation and widening of the cracks in the frame member.