Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 20 for “"Dynamic Braking"”.

  1. The dynamic braking of induction motors.

    The dynamic braking of induction motors is investigated with particular emphasis on the use o-f zero-sequence connections. The braking performance using both AC and DC supplies is compared. A mathematical model is developed to predict both the transient and steady-state zero-sequence braking …

    unsw Repository record for The dynamic braking of induction motors. (opens in a new tab)

  2. Dynamic Braking Control for Accurate Train Braking Distance Estimation under Different Operating Conditions

    … Reference Adaptive Control (MRAC) for train dynamic braking is investigated in order to control dynamic braking forces while remaining within the allowable adhesion and coupler forces. This control method can accurately determine the train braking distance. One of the critical factors in …

    vt Repository record for Dynamic Braking Control for Accurate Train Braking Distance Estimation under Different Operating Conditions (opens in a new tab)

  3. Automatic control of ship deceleration

    Various methods have been introduced for dynamic braking of ships. Depending on the prime mover and transmission system, dynamic braking is accomplished by electric power dissipation (in electric driven ships) or clutches and braked, or air compression (in diesel engine propulsion systems). In this …

    nps Repository record for Automatic control of ship deceleration (opens in a new tab)

  4. Discontinuous damping of relay servomechanisms.

    … the aim of this paper to investigate the use of dynamic braking in the dead zone of a relay servo to improve its performance as a positioning device. The investigation was performed at the U.S. Naval Postgraduate School at Monterey, California during the period September, 1955 to May, 1956.

    nps Repository record for Discontinuous damping of relay servomechanisms. (opens in a new tab)

  5. Quasi-optimization of relay servomechanisms.

    … damping in the dead zone provided by dynamic braking, it is indeed possible that a high degree of static accuracy may result. Investigations tend to show that the static accuracy, using this system, is dependent upon (l) the gear ratio between the motor and the error detector (2) the …

    nps Repository record for Quasi-optimization of relay servomechanisms. (opens in a new tab)

  6. Quasi-optimization of two phase induction motor relay servos.

    … the aim of this paper to investigate the use of dynamic braking in the dead zone of a relay servo to improve its performance as a positioning device. The torque element of the servo is a two phase induction servomotor. The investigation was conducted at the U. S. Naval Postgraduate School at …

    nps Repository record for Quasi-optimization of two phase induction motor relay servos. (opens in a new tab)

  7. Performance Improvement Study on High Horsepower Compression Ignition Diesel Engines in Mining Haul Trucks at High Altitude

    … variation was witnessed during dynamic braking for both test; 4% during the test cell work and 12.97 % during the field test. The least amount of variation was witnessed during rated operation at 0.59 % and 0.22 % for the test cell data and field test data respectively. The …

    wvu Repository record for Performance Improvement Study on High Horsepower Compression Ignition Diesel Engines in Mining Haul Trucks at High Altitude (opens in a new tab)

  8. Transients in Single-Phase Induction Motors: A Study of the Transient Torque Characteristics of an Unloaded Single-Phase Capacitor-Start Induction Motor

    … of maximum peak torque. Speed also introduces dynamic braking torque which affects the mean torque pattern. Free-rotor investigations with different applied voltages are described, and their results discussed. The importance of speed effects is well demonstrated by these results. The duration …

    glasgow Download PDF for Transients in Single-Phase Induction Motors: A Study of the Transient Torque Characteristics of an Unloaded Single-Phase Capacitor-Start Induction Motor (opens in a new tab)

  9. DOUBLY FED INDUCTION MOTOR USING SCR INVERTER

    … that this scheme otters possibilities for dynamic braking of hoisting and traction type loads. A number of aspects which require further investigation are outlined.

    sask Repository record for DOUBLY FED INDUCTION MOTOR USING SCR INVERTER (opens in a new tab)

  10. Application of Dual Cycloconverters to a Double Fed Motor for Traction Drives

    … operation at standstill, traction-limited dynamic braking, and high speed operation.</p> <p>In this work, two independently controlled cycloconverters are used with a wound rotor machine to provide a double fed drive system that overcomes the frequency limitations of the cycloconverters and …

    mcmaster Repository record for Application of Dual Cycloconverters to a Double Fed Motor for Traction Drives (opens in a new tab)

  11. Analysis and Simulation of Mechanical Trains Driven by Variable Frequency Drive Systems

    … train is performed. With the recti er and DC bus dynamic braking, the system shows a better performance than the ideal-DC bus case. Lastly, a parametric study of the FOC controller is performed. The effects of primary parameters are discussed. The results indicate that some control parameters …

    tamu Repository record for Analysis and Simulation of Mechanical Trains Driven by Variable Frequency Drive Systems (opens in a new tab)

  12. Energy harvesting and energy efficient control for variable impedance actuators

    … in VIAs by exploiting the regenerative braking effect of DC motors. The proposed damping module uses four switches to combine regenerative and dynamic braking, in a hybrid approach that enables energy regeneration without reduction in the range of damping achievable. Numerical …

    kings Repository record for Energy harvesting and energy efficient control for variable impedance actuators (opens in a new tab) Download PDF for Energy harvesting and energy efficient control for variable impedance actuators (opens in a new tab)

  13. The transputer control of induction motor drives

    … system developed included on-line speed change, dynamic braking and programmable soft-start. Vector-control was also incorporated for good dynamic response. Experimental results of the specified functions of the drive are provided to confirm the proposed specifications of the drive. Further …

    southwales Repository record for The transputer control of induction motor drives (opens in a new tab) Download PDF for The transputer control of induction motor drives (opens in a new tab)

  14. Utopia or Opportunity? - Predicted Performance of 21st Century Technology Steam Locomotives

    … of energy generated by the traction motors in dynamic braking by storing it into accumulators or by feeding resistors that heat the feedwater. A simulation program has been created for assessing the performance of the Hs1, and for comparing the figures with those of a reference diesel-electric …

    aalto Repository record for Utopia or Opportunity? - Predicted Performance of 21st Century Technology Steam Locomotives (opens in a new tab)

  15. Dispatching logic, corridor simulation, and train following algorithms to quantify the benefits of virtual and moving block control systems on North American freight railroad mainlines

    … that could only choose full throttle or full dynamic braking failed to adequately control the simulated train fleet. To develop a successful train following controller for freight train operation in moving blocks, inspiration was taken from the highway vehicle following domain. A proportional …

    uiuc Repository record for Dispatching logic, corridor simulation, and train following algorithms to quantify the benefits of virtual and moving block control systems on North American freight railroad mainlines (opens in a new tab)

  16. Synthesis and Analysis of an Active Independent Front Steering (AIFS) System

    … tire-road adhesion reserve to meet the braking demand, when exists. Simulation results were obtained for a truck model integrating AFS and AIFS systems subjected to a range of steering maneuvers, namely: a J-turn maneuver on uniform as well as split-μ road conditions, and path change and …

    concordia Download PDF for Synthesis and Analysis of an Active Independent Front Steering (AIFS) System (opens in a new tab)

  17. Dynamic Phasor Modeling of Type 3 Wind Farm including Multi-mass and LVRT Effects

    … work develops an average value model and a dynamic phasor model of a Type 3 DFIG wind farm. The average value model replaces the switches and associated phenomena by equivalent current and voltage sources. The dynamic phasor model is based on generalized averaging theory, where the system …

    sask Repository record for Dynamic Phasor Modeling of Type 3 Wind Farm including Multi-mass and LVRT Effects (opens in a new tab)

  18. Brzdění asynchronního stroje

    … protiproudem. Předposlední část je věnována dynamickému brzdění. Poslední část obsahuje krátké seznámení s generátorickým brzděním. Kapitoly zaměřené na brzdění jsou doplněny simulovanými průběhy.

    brno-tech Repository record for Brzdění asynchronního stroje (opens in a new tab)

  19. Brzdění asynchronního stroje

    … protiproudem. Předposlední část je věnována dynamickému brzdění. Poslední část obsahuje krátké seznámení s generátorickým brzděním. Kapitoly zaměřené na brzdění jsou doplněny simulovanými průběhy.

    brno-tech Repository record for Brzdění asynchronního stroje (opens in a new tab)

  20. Metrology Infrastructure for Energy and Power Quality in DC Railway Systems

    L'abstract è presente nell'allegato / the abstract is in the attachment

    poli-torino Repository record for Metrology Infrastructure for Energy and Power Quality in DC Railway Systems (opens in a new tab)