Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"Dynamic Friction Tester"”.

  1. Physics-Informed Machine Learning for Predicting Rubber–Surface Friction from Dynamic Friction Tester Measurements: Load–Speed Interaction, Load, Roughness, and Material Response

    … a vehicle can operate. Predicting this friction, however, is far from straightforward because it depends on several variables, such as structural and material properties of tire, road roughness, tire slip, applied load, temperature, and velocity, that interact in complex and nonlinear …

    vt Repository record for Physics-Informed Machine Learning for Predicting Rubber–Surface Friction from Dynamic Friction Tester Measurements: Load–Speed Interaction, Load, Roughness, and Material Response (opens in a new tab)

  2. Developing Pavement-Safety Based Guidelines for Improving Horizontal Curve Safety

    … and field tests (circular track meter (CTM), dynamic friction tester (DFT), 3-wheel polisher, micro-deval test, aggregate image measuring system (AIMS) and skid trailer test) were conducted on various treatment sites, aggregate types and mix types to analyze their performance and effects on …

    tamu Repository record for Developing Pavement-Safety Based Guidelines for Improving Horizontal Curve Safety (opens in a new tab)

  3. An analysis of the seasonal and short-term variation of road pavement skid resistance

    … field monitoring was undertaken using the GripTester and the Dynamic Friction Tester measurement devices on seven sites in the Auckland and Northland Regions of New Zealand was undertaken over a three year period. The effects of temperature, rainfall, contaminants, new surfacings, geometric …

    auckland-ms Repository record for An analysis of the seasonal and short-term variation of road pavement skid resistance (opens in a new tab)

  4. Integrated Experimental Methods and Machine Learning for Tire Wear Prediction

    … accurate and diverse wear data is necessary. The Dynamic Friction Tester (DFT) was designed and built for this purpose. This test machine has made it possible to collect accurate rubber sample wear data which has been validated under different conditions. Wear tests under diverse test conditions …

    vt Repository record for Integrated Experimental Methods and Machine Learning for Tire Wear Prediction (opens in a new tab)

  5. Analytical Modeling for Sliding Friction of Rubber-Road Contact

    Rubber friction is an important aspect to tire engineers, material developers and pavement engineers because of its importance in the estimation of forces generated at the contact, which further helps in optimizing tire and vehicle performances, and to estimate tire wear. It mainly depends on the …

    vt Repository record for Analytical Modeling for Sliding Friction of Rubber-Road Contact (opens in a new tab)

  6. Return to Traffic of Full Depth Reclamation Pavements

    … to be modeled for field use: British Pendulum Tester, Dynamic Friction Tester, a field-scale cohesiometer, and a rebound tester. The in-house testers were put through numerous tests on asphalt emulsion and asphalt foam samples. It was decided that of all of the testers, the one that showed the …

    arkansas Repository record for Return to Traffic of Full Depth Reclamation Pavements (opens in a new tab)

  7. Use of manufactured sands for concrete paving

    … made with different sands were evaluated for friction and texture using a circular texture meter (CTM), a dynamic friction tester (DFT), and a polisher. To ensure that the values obtained at the laboratory related to field performance, test sections constructed with 100% limestone sand and …

    texas Repository record for Use of manufactured sands for concrete paving (opens in a new tab)

  8. Investigation of the Factors Influencing Skid Resistance and the International Friction Index

    … to evaluate the different factors that influence frictional measurements obtained using the Dynamic Friction Tester (DFT). A temperature calibration factor that would account for temperature effects on DFT readings and IFI computations was developed. In addition, other variables that also affect …

    usf Repository record for Investigation of the Factors Influencing Skid Resistance and the International Friction Index (opens in a new tab)

  9. Evaluation Of Pavement Surface Friction Seasonal Variations

    Wet-pavement friction is one of the most important pavement characteristics in relation to highway safety. This property is difficult to measure because it is affected by many vehicle, driver, pavement, and environmental parameters. In particular, it has been observed that both short- and long-term …

    vt Repository record for Evaluation Of Pavement Surface Friction Seasonal Variations (opens in a new tab)

  10. Physically Meaningful Harmonization of Tire/Pavement Friction Measurement Devices

    … characterization and evaluation of tire/pavement friction is critical in assuring runway and highway safety. Historically, Pavement Friction Measurement Devices (PFMDs) employing different measuring mechanisms have been used to evaluate tire/pavement friction. They yield significantly disparate …

    usf Repository record for Physically Meaningful Harmonization of Tire/Pavement Friction Measurement Devices (opens in a new tab)

  11. Development of Comprehensive Experimental, Analytical and, Numerical Methods for Predicting Rubber Friction and Wear under Thermomechanical Conditions

    … of the tire and the vehicle in general. Friction and tread wear are two of these contact characteristics. Considering the tire's functionality, for most applications, it is desired to have higher friction to have better traction and a lower wear rate to minimize the material loss of the …

    vt Repository record for Development of Comprehensive Experimental, Analytical and, Numerical Methods for Predicting Rubber Friction and Wear under Thermomechanical Conditions (opens in a new tab)

  12. Ultra High-Performance Concrete As a High Friction Surface Treatment for Pavements and Bridges

    High Friction Surface Treatment (HFST) is a proven technology to reduce crashes on roadways by increasing the coefficient of friction between vehicle tires and the pavement. However, it is an expensive solution due to the high cost of the two commonly used constituent materials, calcined bauxite …

    clemson Repository record for Ultra High-Performance Concrete As a High Friction Surface Treatment for Pavements and Bridges (opens in a new tab)

  13. Studying the Effects of Thermo-oxidative Aging on the Mechanical, Tribological and Chemical Properties of Styrene-butadiene Rubber

    … properties of SBR were also studied. Dynamic Mechanical Analysis (DMA) was used to characterize the viscoelastic response. Master curves of storage and loss modulus were generated using the time-temperature superposition principle (TTSP). The friction coefficient was estimated from the …

    vt Repository record for Studying the Effects of Thermo-oxidative Aging on the Mechanical, Tribological and Chemical Properties of Styrene-butadiene Rubber (opens in a new tab)

  14. CHARACTERIZATION AND MODELING DETERIORATION OF HIGH FRICTION SURFACE TREATMENT

    … a fraction of the roadway network. High Friction Surface Treatment (HFST), composed of a thin layer of calcined bauxite aggregate on resin-binder, is used to improve friction on curved roadways, especially on curves that have a high friction demand and a history of roadway departure …

    gatech Repository record for CHARACTERIZATION AND MODELING DETERIORATION OF HIGH FRICTION SURFACE TREATMENT (opens in a new tab)

  15. The Prediction of Pavement Surface Aggregate Wear and Microtextural Polishing

    … test (which is used in conjunction with the Dynamic Friction Tester (DFT)) to produce a more accurate assessment of skid resistance of aggregates or road surfaces. There are eight different New Zealand aggregates used in this research, which consist of three Greywacke, two Basalt, one …

    auckland-ms Repository record for The Prediction of Pavement Surface Aggregate Wear and Microtextural Polishing (opens in a new tab)

  16. Investigation of the Validity of the ASTM Standard for Computation of International Friction Index

    Runway friction testing is performed in order to enhance the safety of aircraft operation on runways. Preventative maintenance friction surveys are performed to determine if there is any deterioration of the frictional resistance on the surface over a period of time and to determine if there is a …

    usf Repository record for Investigation of the Validity of the ASTM Standard for Computation of International Friction Index (opens in a new tab)

  17. Evaluating the Sensitivity of the Auckland Pavement Polishing Device and Analysis of Aggregate Microtextural Wear

    … followed by skid resistance measurement via the Dynamic Friction Tester (DFT). However, the APPD device has never been standardised and little is known about the sensitivity of the device to changes in setup variables such as tyre type, tyre pressure, applied load and chip sizes. Even less is …

    auckland-ms Repository record for Evaluating the Sensitivity of the Auckland Pavement Polishing Device and Analysis of Aggregate Microtextural Wear (opens in a new tab)

  18. Investigation of Skid Resistance on Asphalt Pavements in Utah

    Friction is one of the essential aspects of pavement performance and safety. Unfortunately, the rate at which the friction data are being collected exceeds the rate at which the data can be proficiently analyzed. Furthermore, the Utah Department of Transportation (UDOT) lacks long-term trend …

    byu Repository record for Investigation of Skid Resistance on Asphalt Pavements in Utah (opens in a new tab) Download PDF for Investigation of Skid Resistance on Asphalt Pavements in Utah (opens in a new tab)