Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 22 for “"Dynamic cutting"”.

  1. MEASUREMENT OF DYNAMIC CUTTING FORCE COEFFICIENTS

    <p>The dynamic behaviour of metal cutting process is investigated by measuring the various components of dynamic cutting force. For the complete description of dynamics of metal cutting it is necessary to give eight components belonging to the resultant dynamic cutting force in an orthogonal …

    mcmaster Repository record for MEASUREMENT OF DYNAMIC CUTTING FORCE COEFFICIENTS (opens in a new tab)

  2. Analysis of the dynamic cutting force coefficient

    … evidence is presented in this thesis that the Dynamic Cutting Force Coefficients, as measured by the Double Modulation Method, do indeed represent the transfer function of the cutting process. Limits of stability, computed from the measured DCFCs for various steels and the measured transfer …

    mcmaster Repository record for Analysis of the dynamic cutting force coefficient (opens in a new tab)

  3. Static and Dynamic Cutting Model Based on Mechanistic Model

    … machine shops. This study presents a mechanistic cutting force simulation model for ball end milling processes, using ray casting and voxel representation methods used in 3D computer graphics field. Using this method, instantaneous uncut chip cross sectional areas can be extracted, which can be …

    purdue-thes Repository record for Static and Dynamic Cutting Model Based on Mechanistic Model (opens in a new tab)

  4. New Method For Testing The Dynamic Cutting Force Coefficients

    <p> The dynamic behaviour of metal cutting process is investigated by measuring the Dynamic Cutting Force Coefficients. Measurements of eight components of the DCFC's are needed to describe completely the dynamics of metal cutting. This requires complex test apparatus and procedures, yet the …

    mcmaster Repository record for New Method For Testing The Dynamic Cutting Force Coefficients (opens in a new tab)

  5. DEVELOPMENT OF AN ON-LINE TOOL WEAR MONITORING SYSTEM USING DYNAMIC CUTTING FORCE

    … project examines the possibility of using the dynamic cutting force to indirectly monitor the tool wear and predict the tool failure on a lathe turning operation. A personal computer can be used for on-line in-process tool wear monitoring by tracking the dynamic force signals of the cutting …

    nus Repository record for DEVELOPMENT OF AN ON-LINE TOOL WEAR MONITORING SYSTEM USING DYNAMIC CUTTING FORCE (opens in a new tab) Download file for DEVELOPMENT OF AN ON-LINE TOOL WEAR MONITORING SYSTEM USING DYNAMIC CUTTING FORCE (opens in a new tab)

  6. On the development of a dynamic cutting force model with application to regenerative chatter in turning

    … processes in machining and is characterized by a cutting tool moving along the axis of a rotating workpiece as it removes material. A detrimental phenomenon to productivity in turning operations is unstable cutting or chatter. This can reduce the life of tooling, dimensional accuracy, and the …

    gatech Repository record for On the development of a dynamic cutting force model with application to regenerative chatter in turning (opens in a new tab)

  7. Chatter stability of turning and milling with process damping

    … steel and thermal-resistant alloys at low ‎cutting speeds has been difficult due to unknown process damping contributed by the ‎contact mechanism between tool flank and wavy surface finish. This thesis presents ‎modeling and measurement of process damping coefficients, and the prediction of …

    ubc Repository record for Chatter stability of turning and milling with process damping (opens in a new tab) Download PDF for Chatter stability of turning and milling with process damping (opens in a new tab)

  8. Dynamic PVDF sensor based monitoring of single point cutting processes

    … fabricated, and evaluated for monitoring the dynamic cutting forces and torque in single-point cutting processes, specifically turning and boring. Physics-based models are used to relate the measured voltage to the process forces and torques. By means of key assumptions about particular strain …

    gatech Repository record for Dynamic PVDF sensor based monitoring of single point cutting processes (opens in a new tab)

  9. Dynamic Modeling and Dynamic Analysis of the Boring Machining System

    The boring operation is a metal cutting process widely used in industry. The inherent properties of the long, slender boring bar make it susceptible to self-excited chatter during machining. The main focus of this thesis is directed at developing a system model which correctly describes the boring …

    uiuc Repository record for Dynamic Modeling and Dynamic Analysis of the Boring Machining System (opens in a new tab)

  10. Chatter avoidance in milling

    … the major limitations on productivity in metal cutting is chatter. Chatter is a form of unstable self-excited vibration which causes poor surface finish, as well as cutter and machine tool damage. The investigation of chatter suppression in milling using continuously variable spindle speed is …

    ubc Repository record for Chatter avoidance in milling (opens in a new tab) Download PDF for Chatter avoidance in milling (opens in a new tab)

  11. Dynamic control of spindle motors for milling applications

    … control system, the power converter and the cutting process. Specifically, the research explores the merits of high speed and precise torque modulation of the drive and its influence on the cutting tool to suppress chatter in milling operations. The coupling between the controller and power …

    whiterose Download PDF for Dynamic control of spindle motors for milling applications (opens in a new tab)

  12. Data-Driven and Physics-Aware Machine Learning Methods for Mechanical System Analysis

    Modeling of complex dynamical systems is necessary to facilitate identification, prediction, and control of those system. Which in turn allows for safe, efficient, well-informed operation of those systems. Specifically, unexpected downtime of manufacturing equipment, Computer Numeric Controlled …

    umn Repository record for Data-Driven and Physics-Aware Machine Learning Methods for Mechanical System Analysis (opens in a new tab)

  13. Milling of flexible structures

    … cantilevered plates is studied. The static and dynamic deflections of the plate under periodic milling forces are modelled. A new dynamic cutting force model is developed which considers five discrete zones of relative motion between the tool and the workpiece. The kinematics of both milling and …

    ubc Repository record for Milling of flexible structures (opens in a new tab) Download PDF for Milling of flexible structures (opens in a new tab)

  14. Mechanics and dynamics of ballend milling

    … cutter geometry, ball end milling mechanics and dynamics have not been studied until recently. In this research, the mechanics and dynamics of cutting with a special helical ball end cutter are modeled. A unified mathematical model, which considers the true rigid body kinematics of milling, …

    ubc Repository record for Mechanics and dynamics of ballend milling (opens in a new tab) Download PDF for Mechanics and dynamics of ballend milling (opens in a new tab)

  15. AMANDA : density-based adaptive model for nonstationary data under extreme verification latency scenarios

    … AMANDA has two variations: AMANDA with a fixed cutting percentage (AMANDA-FCP); and AMANDA with a dynamic cutting percentage (AMANDADCP). Our results indicate that the two variations of AMANDA outperform the state-of-the-art methods for almost all synthetic datasets and real ones with an …

    brazil-uerj Repository record for AMANDA : density-based adaptive model for nonstationary data under extreme verification latency scenarios (opens in a new tab)

  16. Displacement-based dynamometer for milling force measurement

    … testing of a low-cost dynamometer for milling dynamic force measurement. The monolithic design is based on constrained-motion/flexure-based kinematics, where force is inferred from displacement measured using a low-cost optical interrupter (i.e., a knife edge that partially interrupts the light …

    utk-theses Repository record for Displacement-based dynamometer for milling force measurement (opens in a new tab)

  17. The Physico-chemical Characterisation of Bioactive Glass Air-abrasion on Human Enamel

    … of six operating parameters on air-abrasion dynamic cutting efficiency / patterns was assessed using an enamel analogue material (MacorTM) and white light profilometry. Standardised resin composite restorations created within MacorTM blocks, were removed in simulated clinical conditions and …

    kings Repository record for The Physico-chemical Characterisation of Bioactive Glass Air-abrasion on Human Enamel (opens in a new tab) Download PDF for The Physico-chemical Characterisation of Bioactive Glass Air-abrasion on Human Enamel (opens in a new tab)

  18. Mechanics and dynamics of multi-point threading of thin-walled oil pipes

    … and environmental disasters. Threading is a form cutting operation resulting in wide chips with complex geometries. Multi-point inserts used in mass production can have different custom profiles on each tooth. The chip thickness as well as the effective oblique cutting angles, cutting force …

    ubc Repository record for Mechanics and dynamics of multi-point threading of thin-walled oil pipes (opens in a new tab) Download PDF for Mechanics and dynamics of multi-point threading of thin-walled oil pipes (opens in a new tab)

  19. Parametric study of dust generation with rock ridge breakage analysis using a simulated continuous miner.

    … optimum parameters of rock breakage process. A cutting process that induces large chips of cut product results in minimum respirable dust. To produce larger chips of cut product, a correct inter-play of several bit geometry related parameters is essential. As the ridges/lands between two …

    wvu Repository record for Parametric study of dust generation with rock ridge breakage analysis using a simulated continuous miner. (opens in a new tab)

  20. Multi-Axis Milling of Flexible Parts

    … simulation. In order to determine the acceptable cutting conditions, process planners faced with the flexible tools and thin walled structures either use very conservative cutting conditions, or in the case of high volume productions, trial and error methods. In either case, a final air cut is …

    mcmaster Repository record for Multi-Axis Milling of Flexible Parts (opens in a new tab)

Page 1 of 2