Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 23 for “"Dynamic material properties"”.
-
Dynamic Material Properties Copper Mountain Sandstone Under Uniaxial and Oblique Impact
… samples began with an examination of elastic properties before conventional low strain rate testing was conducted. Sample thickness varying from ~0.5 mm to ~3.0 mm, were tested in high strain rate plane strain and pressure-shear configurations at impact velocities from 3 m/s to 720 m/s. Each …
-
Protecting the Pregnant Occupant: Dynamic Material Properties of Uterus and Placenta
… accurate research tools, better pregnant tissue material data are needed. Therefore, the purpose of this dissertation is to provide material properties for the placenta and pregnant uterine tissue in dynamic tension.
-
Dynamic material properties of orthotropic polymer and molybdenum for use in next generation composite armor concept
… an orthotropic polyethylene fiber-epoxy matrix material that is being investigated for use in a next generation layered armor concept. Dyneema was chosen due to its high variation in sound speeds in the through direction and along the fiber direction, thereby making it a good candidate for a …
-
Development of a large-diameter gas gun for studies of gage validation and dynamic material properties
… impact of the projectile onto geologic or other material specimens beneath the gun provides precise shock environments for shock physics studies, especially the evaluation and validation of ground-motion instruments, and the development of dynamic material properties data for large specimens. …
-
Comprehensive viscoelastic characterization of human lower cervical spine ligaments
… definition of cervical spine ligament mechanical properties is requisite to understand and model global cervical spine biomechanics. These ligaments have been shown to exhibit complex nonlinear elastic behavior. In addition, ligamentous mechanical behavior is highly time-dependent (viscoelastic). …
-
Determining material properties using impact wave propagation method
<p>Mechanically testing soft materials to identify dynamic material properties remains challenging in both theory and practice. Commonly used methods, the SHPB technique for example, have very limited capacity. One of the shortcomings is the impedance mismatch between bar and specimen: …
-
Dynamic material characterisation of solder interconnects in microelectronic packaging
An Investigation of quasi-static and dynamic properties of Sn-37Pb solder and two lead-free solder materials, Sn-3.5Ag and Sn-3.8Ag-0.7Cu was carried out using the split Hopkinson pressure bar (SHPB). Each solder was cast at three different cooling rates (slow cooling, moderate cooling and quench …
-
Design of elastic metamaterials
… three broadband single negativity elastic metamaterials using a 3D printer. We investigated dispersion curves and dynamic material properties of the metamaterials. Negative phase velocity in the double negativity metamaterial was also demonstrated. For metamaterials with single negativity, …
-
Modeling of Elasticity and Damping for Filled Elastomers
Elasticity and damping are significant properties of rubber, taken advantage of in engineering applications. It is therefore important that the constitutive model accurately captures these aspects of the mechanical behavior. In the first part of the thesis a description of theory and experiments …
-
Origin and development of internal stresses during polymerization of composite resins
… and arise especially when the adhesive composite materials are cured in a cavity, in which the polymerization contraction is restrained by the cavity walls. During masticatory functioning these residual polymerization stresses elevate the overall stress levels. They exercise a cumulative effect, …
-
Towards local property assessment of advanced manufactured microstructures: a case study in linear friction welded titanium
… in part through data-driven approaches to materials processing, have optimised the structure of additive products and refined the processes for complex joining technologies. However, in doing so they radically change the material structure, often introducing strong local heterogeneity …
-
Quasi-Static and Multi-Site High Velocity Impact Response of Composite Structures
… the performance characteristics of layered materials for impact protection. The overall objective of this work is to investigate the behavior of laminated composites which include both thermoplastic and thermoset systems subjected to quasi-static, low and high velocity impact; both from an …
-
Effect of High-Performance Concrete and Steel Materials on the Blast Performance of Reinforced Concrete One-Way Slabs
… of blast loads. With the arrival of innovative materials such as steel fibre reinforced concrete (SFRC), ultra-high performance fibre reinforced concrete (UHPFRC) and high strength steel reinforcement, research is required in order to successfully adapt these new materials in blast-resistant …
-
Characterization of Mineral-Bonded Composites As Damping Layers Against Impact Loading
… friction, heat, or potential energy. Several materials have been tested as damping layers, including a concrete mixed with waste tire rubber aggregates, two types of lightweight concrete, and two types of infra-lightweight concrete. The cover layers tested include carbon-fiber-reinforced …
-
Development, Analysis and Testing of a Hybrid Passive Control Device for Seismic Protection of Framed Structures
… was completed to measure both the static and dynamic material properties of six different rubber compounds. The two most promising rubber compounds were selected for possible inclusion in the device. Analytical models of these selected materials were developed for nonlinear solid finite …
-
MODELING AND SIMULATION OF SHOCK AND DROP LOADING FOR COMPLEX PORTABLE ELECTRONIC SYSTEMS
… inherent in complex assemblies and complex dynamic material properties. Our goal in this study is to investigate the ability of finite element models to accurately capture the transient response of a complex portable electronic product under shock and drop loading. The portable electronic …
-
Numerical Modelling of the Human Cervical Spine in Frontal Impact
… full cervical spine model that was simulated in dynamic loading and compared to human volunteer response. <br /><br /> Models of each segment were constructed from the basic building blocks of the cervical spine: the intervertebral disc, the vertebrae, the ligaments, and the facet joints. Each …
-
Characterisation and understanding of viscoelastic leading edge protection solutions used on offshore wind turbines
… typically fail prematurely, reducing the aerodynamic efficiency of blades and significantly decreasing energy capture. While lifetime prediction models are available, they are commonly only suitable for homogeneous materials that undergo brittle failure. However, state-of-the-art models cannot …
-
Blast Resistance of Non-Composite Tilt-Up Sandwich Panels and their Connections"
… retrofit techniques to prevent support failure. Dynamic support reactions and predicted support resistances are tabulated for each shot of every panel. The results indicate that it is possible to accurately predict the flexural behaviour and support resistance of a NCTS panel using RC Blast and …
-
Metamaterial Applications for Vibration and Wave Propagation in 1D Elastic Rods
The field of elastic metamaterials has experienced a large amount of development and is reaching a level of maturity where practical applications can be developed. This dissertation is focused on the application of elastic metamaterials and phononic crystals to problems encountered in industry. To …
Page 1 of 2