Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 231 for “"Dynamic mechanical analysis (DMA)"”.
-
Characterization of PHBV-PVP blend
… Fourier Transform Infrared Spectroscopy (FTIR), Dynamic Mechanical Analysis (DMA), and tensile testing as well as a preliminary examination of biodegradation, <i>in vitro</i>, in a M-MEM solution.</p> <p>The glass transition temperatures (T<sub>g</sub>) of PHBV obtained from dynamic mechanical …
-
Cellular Evolution in PEI: Mapping Bubble Dynamics through Solid-State CO_2 Foaming Processes
… in satellites and aircraft cabins. By using dynamic mechanical analysis (DMA), a constitutive model for bubble growth under CO_2 saturation is developed, capturing glass transition effects and growth of nanofoam cells. Key properties such as cell growth rate, CO_2 concentration, porosity, and …
-
Fabrication and characterization of shape memory polymers at small scales
… based on diethylene glycol dimethacrylate (DEGDMA) crosslinker, and tert butyl acrylate (tBA) monomer are designed. The design encompasses a careful control of the backbone chemistry of the materials. Characterization methods such as dynamic mechanical analysis (DMA), differential scanning …
-
Application of Thermomechanical Characterization Techniques to Bismuth Telluride Based Thermoelectric Materials
… little has been published on the thermomechanical properties. In this paper, dynamic mechanical analysis (DMA) and differential scanning calorimetry data for bismuth telluride based TE materials is presented. The TE materials' tan delta values, indicative of viscoelastic energy …
-
Dynamic mechanical analysis of graphite/epoxy composites with varied interphases
Dynamic mechanical analysis (DMA) has been used extensively to characterize polymeric materials. This thesis investigates the use of this technique to characterize composite materials. Four material systems, all having the same fiber and the same matrix material, were systematically altered with …
-
Time, temperature and frequency viscoelastic behavior of commercial polymers
… time, t, from the master curve obtained by TTSP. Dynamic Mechanical Analysis (DMA) tests were done to get complex relaxation modulus, E*(o), as a function of frequency. Frequency Temperature Superposition (FTSP) was done to extend the frequency range. Mathematical transformations from the …
-
MULTI-FUNCTIONAL NANOSTRUCTURED FILMS FROM CELLULOSE NANOFIBERS
… properties, such as biodegradability and high mechanical performance. However, their nano-/microscopric structure is not fully understood. In this thesis, we studied the structural features of CNF by using atomic force microscopy (AFM) and scanning electron microscopy (SEM), and then assessed …
-
The Effects of NaCl on the Triple Helix Structure of Collagen and the Reinforcement of Tung oil-based Polymers with Collagen Peptides
… circular dichroism spectroscopy. After this analysis, the long peptide exhibited more triple helix characteristics as compared to the short peptide. The full protein will ultimately have a better interaction with the tung oil, was used in the synthesis of the collagen-reinforced …
-
Connection Strengthening Scheme For Coastal Bridges Under Hurricane Induced Surge And Wave Load Using C-Iepm
… are predicted, and results are verified using Dynamic Mechanical Analysis (DMA). The Maxwell models for x-DCEPI, as a function of tc, are used in a finite element analysis (ABAQUS) to control performance of dynamically loaded structures. Atomic Force Microscopy (AFM) and Scanning Electron …
-
Interface-Engineered Solid-Liquid Polymer Systems
… materials. By taking advantage of chemical and mechanical interactions it is possible to create materials with novel properties and unique mechanisms such as self-stiffening, self-healing, and adhesion. These properties arise due to large electronegativity differences which are repeated …
-
Cyclic Nano-indentation Investigation of Plasticity in Case Hardened Bearing Steels
… mechanisms that lead to crack initiation and mechanical predictions of bearing endurance. Current bearing research suggests the very high cycle fatigue endurance of low-inclusion content bearing steels is dominated by sub-micrometer plasticity and features uncharacterized by standard …
-
Fatigue behavior of self-healing glass fiber/epoxy composites with addition of poly (ethylene-co-methacrylic acid) (EMAA)
… quasi-static tensile tests, fatigue tests and Dynamic Mechanical Analysis (DMA). Results show slight variation of properties, which was more pronounced as the content of EMAA increased. The healing efficiency was also investigated through fatigue tests and the addition of higher content of EMAA …
-
FABRICATION AND CHARACTERIZATION OF CARBON NANOTUBE METAL MATRIX COMPOSITES FOR USE IN PHOTOVOLTAIC GRIDLINE APPLICATIONS
… the cell structure and metallization failure. Mechanical stresses and thermal cycling of the device can lead to fracture of the current-carrying metal (Ag) lines on the surface of the device, significantly reducing output power. Incorporating carbon nanotubes (CNTs) into PV metal lines as a …
-
Damping and Mechanical Behavior of Multiwalled Carbon Nanotube Epoxy Composites
… using creep, stress-relaxation, and dynamic mechanical analysis (DMA) tests at different temperatures. Nanoindentation techniques are non-destructive and only require a small sample to perform experiments. While instrumented indentation has enabled high-throughput measurement of many …
-
Structure-property relationship in core-shell rubber toughened epoxy nanocomposites
… and transmision electronic microscopy (TEM). Dynamic mechanical analysis (DMA) on the prepared epoxy nanocomposites revealed the significant increase in rubbery plateau moduli of the epoxy nanocomposite systems above Tg, as high as 4.5 times, and tensile test results showed improved modulus by …
-
POLYMER-NANOPARTICLE-MODIFICATION OF BITUMEN USING STYRENE-BUTADIENE-STYRENE (SBS) TRIBLOCK COPOLYMER, CRUMB RUBBER (CR) AND FUMED NANOSILICA.
… Infrared (FTIR) Spectroscopy and Dynamic Mechanical Analysis (DMA) were investigated and correlated with the performance of the materials.
-
Estudo da adição do termoplástico poli (etileno-co-metil acrilato-co-glicidil metacrilato) (E-MA-GMA) como agente de reparo em compósitos fibra de vidro-epóxi
… (FTIR), scanning electron microscopy (SEM) and dynamic mechanical analysis (DMA). ILSS results after healing showed that the stiffness and strength of the samples were reduced, as compared to values before the healing cycle. Nevertheless, strength reduction was lower when the thermoplastic was …
-
Kinematics of Inter-Ply Interfaces In Composite Manufacturing
… cycle design, interface modification, and thermomechanical modeling for developing a fundamental understanding of the cure kinetics during composite manufacturing. Strains, ply-movement, and formation of defects are observed in-situ using digital image correlation (DIC) during the autoclave cure …
-
Dynamic mechanical analysis of magnetic tapes at ultra-low frequencies
… tapes, using a custom, ultra-low frequency, dynamic mechanical analyzer. The long-term mechanical and thermal properties of magnetic tapes can be simulated using high temperature and low frequency dynamic mechanical analysis (DMA) experiments. These experiments investigate how the …
-
Characterization of brain tissue: Dynamic mechanical testing and viscoelastic modelling
… to potential damage under various conditions of mechanical loading. The studies in this thesis aimed to investigate the viscoelastic properties of brain tissue under various loading conditions and develop viscoelastic models to capture the tissue behaviour. The mechanical properties of brain …
Page 1 of 12