Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 53 for “"Dynamic recovery"”.

  1. Mathematical Modeling and Dynamic Recovery of Power Systems

    Power networks are sophisticated dynamical systems whose stable operation is essential to modern society. We study the swing equation for networks and its linearization (LSEN) as a tool for modeling power systems. Nowadays, phasor measurement units (PMUs) are used across power networks to measure …

    vt Repository record for Mathematical Modeling and Dynamic Recovery of Power Systems (opens in a new tab)

  2. Remora-inspired dynamic recovery strategies for the autonomous underwater vehicle

    … and safety. Traditional AUV docking and recovery techniques often face inefficiencies, necessitating the development of a dynamic underwater recovery mechanism. This thesis explores the design and development of a remora-inspired AUV equipped with an innovative dynamic recovery system. …

    strathclyde Repository record for Remora-inspired dynamic recovery strategies for the autonomous underwater vehicle (opens in a new tab)

  3. Algorithms for Incorporation of Dynamic Recovery in Estimating Frequency of Critical Station Blackout

    … numerical evaluation of multidimensional nonrecovery integrals. This requires development of computational methods with data provided from South Texas Project Nuclear Operating Company (STPNOC). Several methods that are currently used in the industry to estimate such probabilities often …

    tamu Repository record for Algorithms for Incorporation of Dynamic Recovery in Estimating Frequency of Critical Station Blackout (opens in a new tab)

  4. Ion irradiation induced damage and dynamic recovery in single crystal silicon carbide and strontium titanate

    … ion irradiation induced damage accumulation and dynamic recovery in SiC [silicon carbide] and SrTiO<sub>3</sub> [strontium titanate] were studied in this dissertation project. Five chapters are presented: Firstly, electronic stopping power for heavy ions in light targets was experimentally …

    utk-theses Repository record for Ion irradiation induced damage and dynamic recovery in single crystal silicon carbide and strontium titanate (opens in a new tab)

  5. Flow stress, restoration and precipitation behavior, and modeling for two Ti-Nb stabilized IF steels in the ferrite region

    … IF steels. The flow stress behavior, static and dynamic restoration characteristics, precipitation behavior, and Compact Strip Production (CSP) rolling simulation behavior have been investigated on two Ti-Nb stabilized IF steels in this study. This was accomplished with the aid of axisymmetric …

    ubc Repository record for Flow stress, restoration and precipitation behavior, and modeling for two Ti-Nb stabilized IF steels in the ferrite region (opens in a new tab) Download PDF for Flow stress, restoration and precipitation behavior, and modeling for two Ti-Nb stabilized IF steels in the ferrite region (opens in a new tab)

  6. The effects of processing conditions on static abnormal grain growth in Al-Mg alloy AA5182

    … recrystallization process related to geometric dynamic recrystallization (GDRX) and requires both deformation at elevated temperature and subsequent static annealing. A minimum temperature is required for both SAGG and GDRX. Recrystallized grains only develop at strains larger than the critical …

    texas Repository record for The effects of processing conditions on static abnormal grain growth in Al-Mg alloy AA5182 (opens in a new tab)

  7. The deformation characteristics of zinc and cadmium

    … II hardening of single crystals below .26. When dynamic recovery occurs [formula omitted] increases with increasing strain. It has been observed that below .26 the linear hardening rate in cadmium decreased with increasing grain size ( constant specimen dimensions) so that [formula omitted] The …

    ubc Repository record for The deformation characteristics of zinc and cadmium (opens in a new tab) Download PDF for The deformation characteristics of zinc and cadmium (opens in a new tab)

  8. Microstructural development of duplex stainless steels during thermomechanical processing

    … out in Gleeble 3500. It is shown that the dynamic recovery (DRV) and discontinuous dynamic recrystallization (dDRX) are the primary softening mechanisms of ferrite and austenite respectively. The presence of interphase interfaces and the lack of grain boundaries in DSS castings can impact …

    unsw Repository record for Microstructural development of duplex stainless steels during thermomechanical processing (opens in a new tab)

  9. Recrystallization in Aluminum Alloys

    … processes were examined. The rate of dynamic recovery appears to be enhanced by the change in strain path. The change in strain path is reflected in changes in recrystallization behaviour and can be rationalized in terms of the energy stored by various strain paths. An attempt has been …

    mcmaster Repository record for Recrystallization in Aluminum Alloys (opens in a new tab)

  10. Substructural Studies at Large Strains in Aluminum

    … extent of homogeneity of slip on the extent of dynamic recovery and the resulting dislocation substructure. Development of high angle boundaries in the as-deformed condition in crystals deformed to large strains, is associated with inhomogeneity of slip. Origin of these high angle boundaries …

    mcmaster Repository record for Substructural Studies at Large Strains in Aluminum (opens in a new tab)

  11. The hot working characteristics of Al-0.65% Fe, and Al-0.5% Fe-0.5% Co conductor alloys

    … strain to steady state and hence the level of dynamic recovery. In interrupted testing, fractional softening increased with rise in temperature or hold time, or decline in strain rate. With repeated passes, the strength of the alloys declined substantially compared to continuous testing.

    concordia Download PDF for The hot working characteristics of Al-0.65% Fe, and Al-0.5% Fe-0.5% Co conductor alloys (opens in a new tab)

  12. Effects of microstructure evolution on deformation and damage mechanisms during creep-fatigue testing of Alloy 709, The

    … hold times (0 to 30 min). Under conditions where dynamic precipitation is significant, a transition in slip behavior from planar to wavy leads to dynamic recovery at grain boundaries and a reduction of intergranular damage propagation as plastic deformation is enhanced at crack tips. Easier …

    colo-mines Repository record for Effects of microstructure evolution on deformation and damage mechanisms during creep-fatigue testing of Alloy 709, The (opens in a new tab)

  13. Mechanical properties and microstructural characteristics of an Al-Mg alloy with bimodal grain size at room and elevated temperatures

    … conventional Al 5083 at the same temperature. Dynamic recovery was observed in high temperature tests and the amount of recovery was found to depend on the material's CG ratio. Strain rate sensitivity was observed in the material at all temperatures. Significant differences were observed both …

    alabama Repository record for Mechanical properties and microstructural characteristics of an Al-Mg alloy with bimodal grain size at room and elevated temperatures (opens in a new tab)

  14. OPTIMIZING THE EXTRUDABILITY OF 6082 ALUMINUM BY VARYING THE MAGNESIUM AND SILICON CONCENTRATION

    … in the extrusion process. Controlling the dynamic recovery and recrystallization properties by changing the additions of Mg and Si can improve the hot deformation properties. Five alloys of varying Mg and Si concentrations between 0.6 to 1.2wt% Mg and 0.7 to 1.3wt% Si were made with …

    mtu Repository record for OPTIMIZING THE EXTRUDABILITY OF 6082 ALUMINUM BY VARYING THE MAGNESIUM AND SILICON CONCENTRATION (opens in a new tab)

  15. Microstructure Evolution in 304L Stainless Steel Subjected to Hot Torsion at Elevated Temperature

    … within grains. These are characteristics of the dynamic recovery (DRV). With increasing strain and strain rate, the lengths of DSs, LABs and HABs increase, accompanied by the decrease of average grain size. Subgrains with HAB segments are observed. These are characteristics of continuous dynamic …

    byu Repository record for Microstructure Evolution in 304L Stainless Steel Subjected to Hot Torsion at Elevated Temperature (opens in a new tab) Download PDF for Microstructure Evolution in 304L Stainless Steel Subjected to Hot Torsion at Elevated Temperature (opens in a new tab)

  16. Modeling and Simulation of Viscoplasticity, Recrystallization, and Softening of Alloyed Steel During Hot Rolling Process

    … of this study is to investigate viscoplasticity, dynamic recrystallization, and static softening of alloyed metal during hot rolling process. Gleeble hot compression tests were performed to provide experimental stress-strain curves at different temperatures and strain rates. An inverse finite …

    must-thes Repository record for Modeling and Simulation of Viscoplasticity, Recrystallization, and Softening of Alloyed Steel During Hot Rolling Process (opens in a new tab)

  17. Microstructure-strength relationships of heavily deformed Cu-based composites

    … the Cu matrix undergoes a cycle of deformation-dynamic recovery-recrystallization which allows for the further reduction of the Nb. Longitudinal and transverse specimens have equivalent mechanical properties. The ultimate tensile strength of the sheet showed a weak dependence on Nb filament …

    iastate Repository record for Microstructure-strength relationships of heavily deformed Cu-based composites (opens in a new tab)

  18. Microstructural changes in aluminum under reversing strains

    … steady state plateaus affirm the occurrence of dynamic recovery (DRV). On reversal of strain direction at constant [Special characters omitted.] , there was generally negligible Bauschinger effect. Features such as elongated grains with serrations and deformation bands confirmed DRV in forward …

    concordia Download PDF for Microstructural changes in aluminum under reversing strains (opens in a new tab)

  19. BULK NANOSTRUCTURED STEELS FOR NUCLEAR REACTOR AND EXTREME ENVIRONMENT APPLICATIONS

    … strengthening, and dislocation strengthening. Dynamic recovery was promoted due to ECAP at 520 oC rendering it with a large area fraction of less mobile low angle grain boundaries (LAGBs) which thermally stabilized it up to 500 C, well above the operating temperature of an LWR. FeCrAl alloys …

    must-thes Repository record for BULK NANOSTRUCTURED STEELS FOR NUCLEAR REACTOR AND EXTREME ENVIRONMENT APPLICATIONS (opens in a new tab)

Page 1 of 3