Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 46 for “"Dynamometer Test"”.
-
Agricultural tire dynamometer test stand
… in the field without performing expensive field tests. However, these models have two major drawbacks, inconsistent soil cone index readings and inaccurate tire dimension representations. Since empirical analysis was used to generate a tire’s tractive capability characteristics, only the tire …
-
Development of a variable-fill hydraulic dynamometer test bench
… device to be used in their newly developed Hydro Testing Facility. The torque absorption device is intended to load hydraulic turbine models that will be tested in the facility, with the purpose of validating and verifying the turbine's performance and control system. To do this, the torque …
-
Development of a heavy-duty vehicle chassis dynamometer test route
A heavy duty vehicle chassis dynamometer driving route, titled "City-Suburban Heavy Vehicle Route" (CSHVR) was developed. Data for designing the CSHVR were collected using a Campbell Scientific 21x. Procedures were developed to reduce statistically the speed and time data into representative speed …
-
Understanding the challenges in HEV 5-cycle fuel economy calculations based on dynamometer test data
EPA testing methods for calculation of fuel economy label ratings, which were revised beginning in 2008, use equations that weight the contributions of fuel consumption results from multiple dynamometer tests to synthesize city and highway estimates that reflect average U.S. driving patterns. The …
-
Comparison of engine and chassis dynamometer test methods for three heavy-duty vehicles emissions characterization, A
Includes bibliographical references (pages 135-140).
-
STUDY OF REAL-TIME STOCHASTIC KNOCK DETECTION AND CONTROL FOR SPARK-IGNITION ENGINES
… level. Both offline simulation and engine dynamometer test result show that stochastic knock control with fixed length FIR filter has slow and excessive retard issue when significant knock event happens To enhance the knock control response, an integrated feed-forward and feedback knock …
-
Developing a HIL-Based Software Platform for Testing Electric and Hybrid Vehicle Powertrains
The objective of this thesis is to present a dynamometer test stand with hardware in the loop (HIL) testing capabilities for the evaluation of electric and hybrid vehicle powertrains under realistic driving conditions. The traction inverter and dc/dc converter are two crucial subsystems of the …
-
Characterization and Modeling of Rubbing Friction in a Motored Four-Cylinder Internal Combustion Engine
… to a Ford 2.0L 4-cylinder engine a dedicated dynamometer test stand was designed and constructed. This test stand allowed the direct measurement of the frictional losses encountered by the engine in the motored state from low to moderate speeds. This data was then used to update and fit a …
-
Characterization of heavy duty engine fuel maps used for model based simulation tools
… fuel consumption is often only known for a few test cycles which generally represent limited types of vehicle activity. It is known that vehicle fuel consumption strongly depends on the vehicle activity, chassis design and engine model year (MY), and hence poses a significant challenge while …
-
Development of a Hybrid Vehicle Powertrain Test Laboratory
… Aeronautical University has installed and tested a fully functional eddy-current chassis dynamometer testing facility on campus. An automotive test facility requires a systems engineering approach to install, calibrate and commission a chassis dynamometer. This thesis shows that, the …
-
Rotating Inertia Impact on Propulsion and Regenerative Braking for Electric Motor Driven Vehicles
… all-wheel drive (AWD) cases. On-road driving and dynamometer tests are different since only one axle (two wheels) is rotating in the latter case, instead of two axles (four wheels). The differences between an on-road test and a dynamometer test are estimated using the developed model. The results …
-
Characterization of infield duty cycles and exhaust emissions from diesel powered off-road heavy-duty equipment
… data was logged during in-field operation, and test cycles were created on a dynamometer test bed using this data. For the tractor, on-board emissions measurement equipment collected mass emissions rate data in field.;Vast differences were found between transient and 8-mode brake-specific test …
-
Characterization of infield vehicle activity data and exhaust emissions from diesel powered off-road vehicles
… document infield operation for the creation of test cycles and strategies. These cycles were later used to mimic infield operation for the collection of emissions and performance data on a dynamometer test bed.;Brake-specific emissions data collected during the transient cycles was compared to …
-
EXPERIMENTAL EVALUATION OF AN RWD VEHICLE WITH PARAMETER EXTRACTION FOR ANALYTICAL MODELING AND EVALUATION
… was conducted to perform experimental vibration testing on a light duty rear wheel drive vehicle. The vehicle is known to have excessive longitudinal acceleration response perceived after step changes in the driver torque command. The excessive response includes shuffle and clunk transients. …
-
Dual-layered Multi-Objective Genetic Algorithms (D-MOGA): A Robust Solution for Modern Engine Development and Calibrations
… for the complex real-world driving emissions testing protocol as the confirmatory and certification testing procedure in Europe and Asia through the United Nations - Economic Commission for Europe (UN-ECE) and International Organization for Standardization (ISO). This calls for more advanced …
-
Experimental and modelling methods for high-accuracy performance characterisation of chain drives
… sources. This thesis investigates and develops testing and modelling methods for achieving high-accuracy estimation of transmission power efficiency of chain drives.<br/><br/>At present many test rigs used in industry are not able to replicate real-world loading and have limited accuracy in …
-
Vector Control and Experimental Evaluation of Permanent Magnet Synchronous Motors for HEVs
… electrical, and mechanical evaluation in a dynamometer test cell at Oak Ridge National Laboratory. These evaluations include locked rotor, back-EMF, and motoring operation region tests. The resulting data is presented to reveal characteristics such as torque capabilities, thermal …
-
A simulation method and laboratory brake friction dynamometer for tribology studies
… can be assessed through laboratory brake dynamometer testing and evaluation. In the current study, a wear testing simulation and an inertia laboratory brake dynamometer were developed to resolve differences in wear rates of brake materials. Dynamometer testing was conducted to verify the …
-
Characterization of Torque Converter Cavitation Sound Power Level over Varying Speed Ratio
… noise levels in the design process. An automated dynamometer test cell with a specially designed torque converter test chamber was implemented to determine these parameters through experimentation. The test chamber was specially calibrated to determine sound power through a method developed and …
-
The evaluation of a computer controlled air pump for improved automobile emissions
<p>Proof-of-concept testing was performed to determine the effectiveness of a computer controlled air pump (CCAP) in reducing the unburned hydrocarbons (UHC) and carbon monoxide (CO) emitted from automobile engines. For the initial phase of testing, a prototype CCAP was designed and evaluated on a …
Page 1 of 3